Search Results for wrought products

This chapter provides an overview of the alloy and temper designations adopted for aluminum cast and wrought products. It explains the naming system and how to identify the main alloying elements and basic strengthening mechanism from any given alloy and temper designation. The chapter provides additional detail on the strengthening and softening mechanisms that allow aluminum alloys to attain a range of engineering properties. The strength of aluminum alloys can be controlled by three methods: solid-solution hardening by alloying, work hardening by plastic deformation, and precipitation hardening with appropriate alloying and heat treatment.

A large portion of cast and wrought product production is directed to the ground transportation market. Aluminum castings, extrusions, forgings, and rolled products all find wide application for trucks, trains, subways, and buses and are discussed in this chapter.

Almost all metals and alloys are produced from liquids by solidification. For both castings and wrought products, the solidification process has a major influence on both the microstructure and mechanical properties of the final product. This chapter discusses the three zones that a metal cast into a mold can have: a chill zone, a zone containing columnar grains, and a center-equiaxed grain zone. Since the way in which alloys partition on freezing, it follows that all castings are segregated to different categories. The different types of segregation discussed include normal, gravity, micro, and inverse. The chapter also provides information on grain refinement and secondary dendrite arm spacing and porosity and shrinkage in castings. It concludes with a brief overview of six of the most important casting processes in industries: sand casting, plaster mold casting, evaporative pattern casting, investment casting, permanent mold casting, and die casting.

Beryllium is an extraordinary metal with an unusual combination of physical and mechanical properties. It has low density, high stiffness, and excellent dimensional stability. It is also transparent to x-rays and can be machined to extremely close tolerances. This chapter discusses the properties, compositions, and processing characteristics of beryllium and its alloys. It provides information on powder production and consolidation, commercial designations and grades, wrought products, and forming processes. It also discusses the issue of corrosion, the use of protective treatments and coatings, and health and safety concerns.

The manufacture of all aluminum wrought products begins with an ingot or a continuous strip solidified from the liquid state. During molten metal processing (MMP), aluminum undergoes a series of operations that are described in this chapter including melting and alloying, recycling, molten metal treatment, control of inclusions, ingot grain refinement, and direct chill (DC) or continuous casting.

This chapter is dedicated mostly to the metallurgical effects on the corrosion behavior of corrosion-resistant alloys. It begins with a section describing the importance of alloying elements on the corrosion behavior of nickel alloys. The chapter considers the metallurgical effects of alloy composition for heat-resistant alloys, nickel corrosion-resistant alloys, and nickel-base alloys. This chapter also discusses the corrosion implications of changing the alloy microstructure via solid-state transformation, second-phase precipitation, or cold work. It concludes with a comparison of corrosion behavior between cast and wrought product forms.

This chapter is dedicated mostly to the metallurgical effects on the corrosion behavior of corrosion-resistant alloys. It begins with a section describing the importance of alloying elements on the corrosion behavior of nickel alloys. The chapter considers the metallurgical effects of alloy composition for heat-resistant alloys, nickel corrosion-resistant alloys, and nickel-base alloys. This chapter also discusses the corrosion implications of changing the alloy microstructure via solid-state transformation, second-phase precipitation, or cold work. It concludes with a comparison of corrosion behavior between cast and wrought product forms.

The solidification process has a major influence on the microstructure and mechanical properties of metal casting as well as wrought products. This appendix covers the fundamentals of solidification. It discusses the formation of solidification structures, the characteristics of planar, cellular, and dendritic growth, the basic freezing sequence for an alloy casting, and the variations in cooling rate, heat flow, and grain morphology in different areas of the mold. It also describes the types of segregation that occur during freezing, the effect of solidification rate on secondary dendrite arm spacing, and the factors that contribute to porosity and shrinkage.

This appendix provides information on temper designations for strain-hardened aluminum, heat treatable aluminum alloys, and annealed aluminum products.

This article discusses the composition, properties, and behaviors of zinc and its alloys. It explains where cast and wrought zinc alloys are used, describes commercial designations and grades, and discusses the effect of various alloying elements on properties and performance.

This chapter describes the processes and alloys used in the casting of aluminum components, the advantages and disadvantages of the different shape-casting methods, and the major factors that influence alloy selection for shape-casting applications. An overview of the heat treatment of cast products is also included.

This chapter provides basic materials selection information for iron-nickel-, nickel-, and cobalt-base superalloys. It discusses mechanical and physical properties, the effect of service temperature, and the comparative strengths of wrought and cast product forms. It includes several large data tables along with reference information and a detailed application example based on the design of a gas turbine disk.

This chapter describes the attributes of aluminum products that are critical for key structural applications. It covers the selection criteria and evaluations performed by the aluminum supplier or customer: physical attributes, mechanical properties (tensile, fracture, and fatigue), and corrosion.

This chapter discusses the advantages and disadvantages of producing titanium parts using powder metallurgy (PM) techniques. It compares the typical properties of wrought, cast, and PM titanium alloy products, addresses various manufacturing challenges, and describes several consolidation and shaping processes along with associated property data.

This chapter provides basic concepts and background for customer-related manufacturing processes applied to aluminum products including forming, joining and welding, surface treatments, and machinability. It reviews the selection criteria, key testing regimes, and original equipment manufacturer (OEM) requirements. The chapter also presents examples that demonstrate the importance of choosing the correct alloy and temper to successfully meet the OEM fabrication criteria.

Forged aluminum products vary widely in their production methods and applications. The forging process allows for control of microstructure and directional properties, and their fatigue and fracture resistance are superior to shape castings. This chapter presents the types, equipment, process steps, alloys, and products of aluminum forging.

Titanium castings are used in a wide range of aerospace, chemical process, marine, biomedical, and automotive applications. This chapter provides an overview of titanium casting and associated processes and how they compare with other manufacturing methods. It also discusses the role heat treating and its effect on the tensile properties of different titanium alloys.

This chapter provides a general overview of titanium and its versatility as an engineering material.

This chapter discusses the progress that has been made in the development of superalloy operating temperatures, properties, and performance. It also provides forward-looking projections based on advances in process modeling, alloying, and production techniques.