Managing corrosion continues to be a challenge for operators of modern boilers worldwide. This chapter addresses the corrosion-related problems that can occur in boilers burning municipal solid waste (MSW). It describes corrosion mechanisms associated with different environments and alloys. It also discusses corrosion protection methods for furnace waterwalls and superheater tubes in waste-to-energy boilers.

This chapter outlines the topics covered in the book and explains why and to whom the book was written. The book is intended for engineers, metallurgists, and failure analysts who work with materials and components that operate in high-temperature corrosive environments. It covers eight basic modes of high-temperature corrosion as well as the effect of external and residual stresses. It also provides an extensive amount of engineering data associated primarily with commercial alloys.

Boilers are engineered systems designed to convert the chemical energy in fuel into heat to generate hot water or steam. This chapter describes boiler applications and types, including firetube boilers, watertube boilers, electric boilers, packaged boilers, fluidized bed combustion boilers, oil- and gas-fired boilers, waste heat boilers, and black liquor recovery boilers. It also describes the operation and working principle of utility or power plant boilers, covering conventional subcritical and advanced supercritical types.

This chapter explains how materials selection becomes much more difficult when designing for high-temperature corrosion environments. It also discusses the use of cladding and weld overlays to compensate for material deficiencies and prolong service life.

This chapter discusses material-related problems associated with coal-fired burners. It explains how high temperatures affect heat-absorbing surfaces in furnace combustion areas and in the convection pass of superheaters and reheaters. It describes how low-NOx combustion technology, intended to reduce NOx emissions, accelerates tube wall wastage. It also covers circumferential cracking in furnace waterwalls, thermal fatigue cracking induced by waterlances and water cannons, superheater-reheater corrosion, and erosion in fluidized-bed boilers.

Fossil fuels produce many byproducts that, if not fully combusted, put boiler tubes at risk. Fuel ash, chemical residues, and process heat pose the greatest threat and are the primary contributors to fireside corrosion. This chapter covers various types of fireside corrosion such as waterwall, fuel ash, and hot corrosion, acid dew-point or cold-end corrosion, and polythionic acid corrosion. It also addresses stress corrosion cracking and includes relevant case studies.

Cold spray coatings technology has the potential to provide surface enhancement for applications in sectors such as defense and aerospace, oil and gas, power generation, medical, automotive, electronics, and railways. The ability to deposit clean metallic coatings is used in applications requiring corrosion/oxidation protection, erosion/wear protection, additive manufacturing, and fabricating free forms. This chapter discusses the function, advantages, and benefits of some of these applications.

This chapter discusses the erosion and erosion-corrosion behaviors of metals and alloys. It includes data primarily related to particle-laden gas streams impacting on the metal surface. It also covers properties and applications and provides guidelines for materials selection.

This chapter discusses two damage mechanisms in which stress plays a major role. In the one case, stress causes cracks in the oxide scale on metals, leading to preferential corrosion attack. An example from industry of this type of failure is the circumferential cracking that occurs on the waterwall tubes of supercritical coal-fired boilers fired under low NOx combustion conditions, conducive to the production of sulfidizing environments. In the other case, stress contributes to brittle fracture in the form of intergranular cracking. The phenomenon, which is known by various names, typically occurs at the lower end of the intermediate temperature range and has been observed in ferritic steels, stainless steels, Fe-Ni-Cr alloys, and nickel-base alloys, as described in the chapter.

This chapter describes two types of auxiliary equipment required in most induction heating installations: cooling systems and device timers. Water- and vapor-based systems used for cooling the power supply and the induction coil are described. The chapter concludes with a brief discussion of timers, with emphasis on open-loop timing systems.

Boilers are often classified based on the maximum operating temperature and pressure for which they are designed. Classifications, in ascending order, are subcritical, supercritical, ultra-supercritical, and to advanced ultra-supercritical. At each higher operating point comes greater efficiency, as well as greater demand on construction materials. This chapter discusses the primary requirements for boiler tube materials, including oxidation and corrosion resistance, fatigue strength, thermal conductivity, and the ability to resist creep and rupture. It also provides information on various steels and alloys, covering cost, engineering specifications, and ease of use.

Black liquor recovery boilers are an integral part of the kraft pulping process used in paper mills. Besides recovering chemicals for reuse, they also produce process steam. High operating temperatures and exposure to process chemicals and combustion byproducts make recovery boilers susceptible to corrosion. This chapter describes some of the problems that the pulp and paper industry has solved as well as ongoing issues and concerns. It includes an in-depth review of 304L cladding failures involving coextruded composite tubes used as floor tunes in the lower furnace, as superheater tubes, and for other purposes such as smelt openings. It provides detailed images showing cracks on the outer surfaces of the tubes and explains where the tubes were used and how they were operated.

Water chemistry is a factor in nearly all boiler tube failures. It contributes to the formation of scale, biofilms, and sludge, determines deposition rates, and drives the corrosion process. This chapter explains how water chemistry is managed in boilers and describes the effect of impurities and feedwater parameters on high-pressure boiler components. It discusses deposition and scaling, types of corrosion, and carryover, a condition that occurs when steam becomes contaminated with droplets of boiler water. The chapter also covers water treatment procedures, including filtration, chlorination, ion exchange, demineralization, reverse osmosis, caustic and chelant treatment, oxygen scavenging, and colloidal, carbonate, phosphate, and sodium aluminate conditioning.

This chapter discusses the effects of corrosion on boiler tube surfaces exposed to water and steam. It describes the process of corrosion, the formation of scale, and the oxides of iron from which it forms. It addresses the primary types of corrosion found in boiler environments, including general corrosion, under-deposit corrosion, microbially induced corrosion, flow-accelerated corrosion, stress-assisted corrosion, erosion-corrosion, cavitation, oxygen pitting, stress-corrosion cracking, and caustic embrittlement. The discussion is supported by several illustrations and relevant case studies.

This appendix provides composition data and application-related information on a wide range of superalloys in both wrought and cast form.

Alloys containing elements that form volatile or low-melting-point halides are susceptible to high-temperature corrosion attack. This chapter explains how to determine whether such phases are likely to form, and the rate at which they occur, based on thermodynamic data and phase stability diagrams. It provides an extensive amount of high-temperature corrosion data for metals and alloys in gaseous environments containing chlorine and hydrogen chloride; fluorine and hydrogen fluoride; bromine and hydrogen bromide; and iodine and hydrogen iodide.

This chapter addresses the issue of stress-corrosion cracking (SCC) in carbon and low-alloy steels. It discusses crack initiation, propagation, and fracture in aqueous chloride, hydrogen sulfide, sulfuric acid, hydroxide, ammonia, nitrate, ethanol, methanol, and hydrogen gas environments. It explains how composition and microstructure influence SCC, as do mechanical properties such as strength and fracture toughness and processes such as welding and cold work. It also discusses the role of materials selection and best practices for welding.