Uranium alloys are used in applications requiring dense metals, but they have little resistance to oxidation and corrosion and are susceptible to environmentally assisted cracking, particularly when processed to high strength levels. This chapter describes the conditions under which uranium alloys are most prone to cracking. It discusses testing and characterization methods, cracking phenomenology, material properties, and microstructure. It also provides suggestions for avoiding and overcoming environmentally assisted cracking problems.

Nonferrous metals are of commercial interest both as engineering materials and as alloying agents. This chapter addresses both roles, discussing the properties, processing characteristics, and applications of several categories of nonferrous metals, including light metals, corrosion-resistance alloys, superalloys, refractory metals, low-melting-point metals, reactive metals, precious metals, rare earth metals, and metalloids or semimetals. It also provides a brief summary on special-purpose materials, including uranium, vanadium, magnetic alloys, and thermocouple materials.

This chapter discusses the characteristics of eutectoid transformations, a type of solid-state transformation associated with invariant reactions, focusing on the iron-carbon system of steel. It describes the compositions, characteristics, and properties of ferrite, eutectoid, hypoeutectoid, and hypereutectoid structures and how they are affected by the addition of various alloying elements. The chapter also discusses the formation of peritectoid structures in the uranium-silicon alloy system.

This chapter is a compilation of beryllium phase diagrams, representing more than 25 binary alloy systems from beryllium-aluminum to beryllium-zirconium. Each diagram is presented along with a summary and source reference.

This appendix is a collection of tables listing coefficients of linear thermal expansion for carbon and low-alloy steels, presenting a summary of thermal expansion, thermal conductivity, and heat capacity; and listing thermal conductivities and specific heats of carbon and low-alloy steels.

This chapter presents an overview of heat treating of nonferrous alloys. First, a brief discussion on the effects of cold work and annealing on nonferrous alloys is presented. This is followed by a discussion on the mechanisms involved in the more commonly used heat treating procedures for hardening or strengthening, namely solution treating and aging. Examples are presented for heat treating of two commercially important nonferrous alloys, one from the aluminum-copper system and one from the copper-beryllium system.

This appendix lists attack-polishing solutions and procedures used in metallographic sample preparation.

This chapter contains tables listing room-temperature tensile yield strength comparisons of metals and plastics and room-temperature tensile modulus of elasticity comparisons of various materials.

This chapter discusses the phase transformations of peritectic alloy systems. It describes the processes involved with equilibrium and nonequilibrium freezing, the mechanisms of peritectic formation, and the resulting microstructures. It also discusses the formation of peritectic structures in iron-base alloys and multicomponent systems.

This chapter explains how to achieve accurate, sharp delineation of the microstructure of metals using appropriate etching and contrasting techniques. It covers a variety of methods, including chemical etching, heat tinting, gas contrasting, vapor deposition, magnetic etching, ion bombardment, and dislocation etch pitting.

Compared with other deformation processes used to produce semifinished products, the hot-working extrusion process has the advantage of applying pure compressive forces in all three force directions, enhancing workability. The available variations in the extrusion process enable a wide spectrum of materials to be extruded. This chapter focuses on the processes involved in the extrusion of semifinished products in various metals and their alloys, namely tin, lead, lead-base soft solders, tin-base soft solders, zinc, magnesium, aluminum, copper, titanium, zirconium, iron, nickel, and powder metals. It discusses their properties and applications as well as suitable equipment for extrusion. It further discusses the processes involved in the extrusion of semifinished products in exotic alloys and extrusion of semifinished products from metallic composite materials.

This appendix provides detailed information on the processes and procedures used in electrolytic polishing. It lists important process parameters, including time, temperature, voltage, and current density, as well as the recipes of electrolytic solutions used. The information is presented in tabular form, corresponding to specific metals and their alloys.

This appendix provides corrosion rate values for various grades of commercially pure and alloyed titanium. The values were derived from published sources and in-house laboratory tests. These data serve only as a starting point or initial guideline for corrosion performance.

Hydrogen damage is a form of environmentally assisted failure that results most often from the combined action of hydrogen and residual or applied tensile stress. This chapter classifies the various forms of hydrogen damage, summarizes the various theories that seek to explain hydrogen damage, and reviews hydrogen degradation in specific ferrous and nonferrous alloys. The preeminent theories for hydrogen damage are based on pressure, surface adsorption, decohesion, enhanced plastic flow, hydrogen attack, and hydride formation. The specific alloys covered are iron-base, nickel, aluminum, copper, titanium, zirconium, vanadium, niobium, and tantalum alloys.

This chapter deals with the mechanics and tribology associated with the extrusion of bars, sections, and tubes. It covers direct and indirect extrusion processes in detail and demonstrates the use of important equations, relationships, and measurements for determining pressure, force, material flow, friction, die wear, heat generation, and lubrication requirements. The chapter also provides information on hydrostatic, friction-assisted, and severe plastic deformation extrusion processes, discusses the cause of instabilities and defects, and explains how to select and apply lubricants to minimize friction and die wear when extruding steel, aluminum, copper, and refractory metals.