Any forming process that converts stored energy to plastic deformation in less than a few milliseconds is considered a high-velocity or impulse forming process. This chapter discusses the operating principles, equipment, and applications of the most common high-rate forming processes, including high-velocity hydroforming, high-velocity mechanical forming, and electromagnetic or energy-based forming.

This chapter discusses the effect of composition and cooling rate on the microstructure and properties of cast irons and explains how they differ from steel. It describes the conditions under which white, gray, mottled (chilled), and nodular (ductile) cast irons are produced, and examines the growth mechanisms and structural details that set them apart. It also discusses the formation of compacted (vermicular) graphite and malleable iron, and compares and contrasts the composition, properties, and heat treatment of whiteheart and blackheart malleable types.

Cold spray coatings technology has the potential to provide surface enhancement for applications in sectors such as defense and aerospace, oil and gas, power generation, medical, automotive, electronics, and railways. The ability to deposit clean metallic coatings is used in applications requiring corrosion/oxidation protection, erosion/wear protection, additive manufacturing, and fabricating free forms. This chapter discusses the function, advantages, and benefits of some of these applications.

Sheet metal spinning is a forming technique that produces axially symmetric hollow bodies with nearly any contour. It is often used in combination with flow forming and shear spinning to manufacture a wide range of complex parts. This chapter describes the operating principles, stress states, and failure modes of each process along with typical applications and tooling requirements.

This chapter describes the various types of cushion systems used in forming presses and their effect on part quality. It begins with a review of the deep drawing process, explaining that wrinkling, tearing, and fracture are the result of excess or insufficient material flow, which can be prevented by maintaining the correct amount of holding force on the periphery of the blank. It then describes how blank holding force is generated in double-action presses and the extent to which displacement profiles can be adjusted on both the inner and outer slides. The discussion then turns to single-action presses that incorporate some type of cushion system. The chapters describes the many ways that cushion systems are implemented in forming presses and the force and displacement characteristics achievable with each method. It also explains how multipoint cushion systems are designed and how they facilitate uniform metal flow into the die cavity of large deep-drawn parts.

This chapter describes incremental sheet forming processes, including single-point, two-point, and kinematic (two tool) techniques. It provides information on the tooling and equipment used, work flow and forming parameters, process mechanics and forming limits. It also discusses multistage forming strategies, process modeling and simulation, and advanced hybrid forming processes.

The hot-working process extrusion is used to produce semifinished products in the form of bar, strip, and solid sections, as well as tubes and hollow sections. The first part of this chapter describes the composition, properties, and applications of tin and lead extruded products with a deformation temperature range of 0 to 300 deg C and magnesium and aluminum extruded products with a working temperature range of 300 to 600 deg C. The second part focuses on copper alloy extruded products, extruded titanium alloy products, and extruded products in iron alloys with a working temperature range of 600 to 1300 deg C.

Hot stamping is a forming process for ultrahigh-strength steels (UHSS) that maximizes formability while minimizing springback. This chapter covers several aspects of hot stamping, including the methods used, the effect of process variables, and the role of finite-element analysis in process development and die design. It also discusses heating methods, cooling mechanisms, and the role of coatings in preventing oxidation.

This chapter opens with a discussion of the classification of rod and tube extrusion processes. The standard processes involve hot working (extrusion at temperatures above room temperature), but some specialized cold working processes are also used for rod and tube extrusion. The next section reviews principles, variations, thermal conditions, axial load calculation, material flow, and applications of direct extrusion and indirect extrusion, with examples provided for extrusion of aluminum and copper alloys. Next, the chapter focuses on the process principles, advantages, and applications of conventional hydrostatic extrusion and thick film processes. This is followed by sections providing information on the special extrusion processes, namely conform process and cable sheathing. The chapter ends with a discussion on direct and indirect tube extrusion.

This chapter serves as a study and guide on the main phase constituents of cast aluminum-silicon alloys, alpha-Al solid solution and Si crystals. The first section focuses on the structure of Al-Si castings in the as-cast state, covering the morphology of the alpha-Al solid solution grains and the process by which they form. It describes how cooling rates, temperature gradients, and local concentrations influence the topology of the crystallization front, and how they play a role in determining the morphology and dispersion degree of the grains observed in cross sections of cast parts. It also describes the mechanism behind dendritic grain crystallization and how factors such as surface tension, capillary length, and lattice symmetry affect dendritic arm size and spacing. The section that follows examines the morphology of the silicon crystals that form in aluminum-silicon castings and its effect on properties and processing characteristics. It discusses the faceted nature of primary Si crystals and the modification techniques used to optimize their shape. It also describes the morphology of the (alpha-Al + Si) eutectic, which can be lamellar or rodlike in shape, and explains how it can be modified through temperature control or alloy additions to improve properties such as tensile strength and plasticity and reduce shrinkage.

The machinery and equipment required for rod and tube extrusion is determined by the specific extrusion process. This chapter provides a detailed description of the design requirements and principles of machinery and equipment for direct and indirect hot extrusion. It then covers the presses and auxiliary equipment for tube extrusion, induction furnaces for billet processing, handling systems for copper and aluminum alloy products, extrusion cooling systems, and age-hardening ovens. Next, the chapter describes the principles and applications of equipment for the production of aluminum and copper billets. Then, it focuses on process control in both direct and indirect hot extrusion of aluminum alloys without lubrication. The chapter describes the technology of electrical and electronic controls in the extrusion process. It ends with a discussion on the factors that influence the productivity and quality of the products in the extrusion process and methods for process optimization.