The relationship of stress and strength gradients must be considered simultaneously in analysis of a particular type of fracture. This chapter discusses the principal elastic stress distribution in members of various shapes under different types of pure loads. A basic understanding of both the stress and strength gradients of metal parts with and without stress concentrations and under different types of loading is provided. The chapter also describes the effect of service conditions on applied stresses.

In order to understand how various types of single-load fractures are caused, one must understand the forces acting on the metals and also the characteristics of the metals themselves. All fractures are caused by stresses. Stress systems are best studied by examining free-body diagrams, which are simplified models of complex stress systems. Free-body diagrams of shafts in the pure types of loading (tension, torsion, and compression) are the simplest; they then can be related to more complex types of loading. This chapter discusses the principles of these simplest loading systems in ductile and brittle metals.

The objective of mechanical testing of an engineered material is to provide data necessary for the analysis, design, and fabrication of structural components using the material. The testing of filament-wound composite materials offers unique challenges because of the special characteristics of composites. This chapter describes suitable static mechanical test techniques for characterizing laminated composite materials. The approach is to provide recommended techniques, based on consensus opinions of fabricators and users of filament-wound composites, and to survey available techniques that have been used successfully in the field. The chapter describes the effects of various factors on the properties of composite constituents, including fibers, resins, and unidirectional plies. Some aspects of specimen selection are also described. The chapter provides information on pressure bottles and tubular parts that have been developed as standard test specimens for combined load testing of composites.

This article reviews nondestructive and destructive test methods used to characterize welds. The first process of characterization discussed involves information that may be obtained by direct visual inspection and measurement of the weld. An overview of nondestructive evaluation is included that encompasses techniques used to characterize the locations and structure of internal and surface defects, including radiography, ultrasonic testing, and liquid penetrant inspection. The next group of characterization procedures discussed is destructive tests, requiring the removal of specimens from the weld. The third component of weld characterization is the measurement of mechanical and corrosion properties. Following the discussion on the characterization procedures, the second part of this article provides examples of how two particular welds were characterized according to these procedures.

This chapter begins with a review of the mechanics of bending and the primary elements of a bending system. It examines stress-strain distributions defined by elementary bending theory and explains how to predict stress, strain, bending moment, and springback under various bending conditions. It describes the basic principles of air bending, stretch bending, and U- and V-die bending as well as rotary, roll, and wipe die bending, also known as straight flanging. It also discusses the steps involved in contour (stretch or shrink) flanging, hole flanging, and hemming and describes the design and operation of press brakes and other bending machines.

This chapter addresses the challenge of selecting an appropriate stress-corrosion cracking (SCC) test to evaluate the serviceability of a material for a given application. It begins by establishing a generic model in which SCC is depicted in two stages, initiation and propagation, that further subdivide into several zones plus a transition region. It then discusses SCC test standards before describing basic test objectives and selection criteria. The chapter explains how to achieve the required loading conditions for different tests and how to prepare test specimens to determine elastic strain, plastic strain, and residual stress responses. It also describes the difference between smooth and precracked specimens and how they are used, provides information on slow-strain-rate testing and how to assess the results, and discusses various test environments and procedures, including tests for weldments. The chapter concludes with a section on how to interpret time to failure, threshold stress, percent survival, stress intensity, and propagation rate data, and assess the precision of the associated tests.

Sheet metal forming operations consist of a large family of processes, ranging from simple bending to stamping and deep drawing of complex shapes. Because sheet forming operations are so diverse in type, extent, and rate, no single test provides an accurate indication of the formability of a material in all situations. However, as discussed in this chapter, the uniaxial tensile test is one of the most widely used tests for determining sheet metal formability. This chapter describes the effect of material properties and temperature on sheet metal formability. Information on the types of formability tests is also provided. The chapter discusses the processes involved in uniaxial and plane-strain tensile testing. Examples include the uniaxial tensile test and the plane-strain tensile test which are subsequently described.

This chapter describes the use of standardized tests to determine the susceptibility of aluminum alloys to specific forms of corrosion, including pitting, intergranular corrosion, filiform corrosion, exfoliation corrosion, and stress-corrosion cracking.

Discontinuities are interruptions in the desirable physical structure of a weld. This article describes the types of weld discontinuities that are characteristic of the principal welding processes. Discontinuities covered are metallurgical discontinuities, discontinuities associated with specialized welding processes, and base metal discontinuities. In addition, information on the common inspection methods used to detect these discontinuities is provided.

This chapter describes the effect of processing variables on the mechanical properties of beryllium, including tensile and yield strength, fracture toughness, creep and fatigue strength, ductile-to-brittle transition, and notch sensitivity. It also discusses the effects of chemical composition, impurities, and grain size and the use of hydrostatic testing.

Roll forming is a process in which flat strip or sheet material is progressively bent as it passes through a series of contoured rollers. This chapter describes the basic configuration and operating principles of a roll forming line and the cross-sectional profiles that can be achieved. It explains how to determine strip width and bending sequences and identifies the cause of common roll-forming defects. It also discusses the selection of roll materials and explains how software helps simplify the design of roll forming lines.

This chapter is a study of the microstructure of case-hardened steels. It explains what can be learned by examining grain size, microcracking, nonmetallic inclusions, and the effects of microsegregation. It identifies information-rich features, describing their ideal characteristics, the likely cause of variations observed, and their effect on mechanical properties and behaviors. The discussions throughout the chapter are aided by the use of images, diagrams, data plots, and tables.

This chapter describes the effect of temperature and strain rate on the mechanical properties and forming characteristics of aluminum and magnesium sheet materials. It discusses the key differences between isothermal and nonisothermal warm forming processes, the factors that affect heat transfer, die heating techniques, and press systems. It also discusses the effect of forming temperature, punch velocity, blank size, and other parameters on deep drawing processes, making use of both experimental and simulated data.

This chapter discusses the factors that influence the load-deformation relationship at the heart of most metal forming operations. It describes the changes that occur in tensile test samples and the various ways test data can be plotted and analyzed, particularly for design purposes. It discusses the effect of normal and planar anisotropy, the development and use of flow stress curves, and how formability is usually measured and expressed. It explains how formability measurements serve as a guide for process and tool design engineers as well as others. It also discusses the development and use of forming limit curves and the extensive amount of information they provide.

Boiler tube failures associated with material defects are often the result of poor quality control, whether in primary production, on-site fabrication, storage and handling, or installation. This chapter examines quality-related failures stemming from compositional and structural defects, forming and welding defects, design defects, improper cleaning methods, and ineffective maintenance. It also includes case studies and illustrations.

This article is intended to help engineers understand why the fatigue behavior of weldments can be such a confusing and seemingly contradictory topic and hopefully to clarify this complex subject. It first reexamines the factors influencing the fatigue behavior of an individual weldment using extensive experimental data and a computer model that simulates the fatigue resistance of weldments. Next, the process of fatigue in weldments is discussed in general terms, and the service conditions that favor long crack growth and the conditions that favor crack nucleation are contrasted. The article then presents experimental data that show the effect of weldment geometry on fatigue resistance. Several useful geometry classification systems are compared. Finally, a computer model is employed to investigate the behavior of two hypothetical weldments: a discontinuity-containing ("Nominal") weldment and a discontinuity-free ("Ideal") weldment.

This chapter is a detailed account of the tensile testing procedure used for evaluating metals and alloys. The discussion covers the stress-strain behavior of metals determined by tensile testing, properties determined from testing, test machines for measuring mechanical properties, and general procedures of tensile testing. Three distinct aspects of standard test methods for tension testing of metallic materials are discussed: test piece preparation, geometry, and material condition; test setup and equipment; and test procedure.

Tube hydroforming is a material-forming process that uses pressurized fluid to plastically deform tubular materials into desired shapes. It is widely used in the automotive industry for making exhaust manifolds, catalytic converters, shock absorber housings, and other parts. This chapter discusses the basic methods of tube hydroforming and the underlying process mechanics. It explains how to determine if a material is a viable candidate and whether it can withstand preforming or bending operations. It describes critical process parameters, such as interface pressure, surface expansion and contraction, and sliding velocity, and how they influence friction, lubrication, and wear. The chapter also provides information on forming presses and tooling, tube hydropiercing, and the use of finite elements to determine optimal processing conditions and loading paths.

Ultrasonic inspection is a nondestructive method in which beams of high frequency acoustic energy are introduced into a material to detect surface and subsurface flaws, to measure the thickness of the material, and to measure the distance to a flaw. This chapter begins with an overview of ultrasonic flaw detectors, ultrasonic transducers, and search units and couplants. It then discusses the principles of operation, presentation, and interpretation of data of pulse echo and transmission methods. This is followed by sections providing information on general characteristics of ultrasonic waves and the factors influencing ultrasonic inspection. The advantages, disadvantages, and applications of ultrasonic inspection are finally compared with other methods of nondestructive inspection of metal parts.