This chapter familiarizes readers with the many and varied thermoset composite fabrication processes and the types of applications for which they were developed. It describes wet lay-up, prepreg lay-up, and low-temperature vacuum bag curing prepreg processes, which are best suited for low-volume, medium-sized and larger parts. It also discusses filament winding and preforming processes (including weaving, knitting, stitching, and braiding) in addition to resin-transfer molding, resin film infusion, and pultrusion.

This chapter provides an overview of the tools and techniques, as well as some of the underlying theory, that have proven useful for process modeling and simulation. It begins by presenting the framework of a thermoset cure model that accounts for kinetics, viscosity, heat transfer, flow, voids, and residual stress. It then discusses each variable in detail, explaining how it affects the cure process, how it is measured, and how it can be expressed mathematically in the form of a simple model. The discussions throughout the chapter are supported by numerous images, diagrams, and data plots.

A systematic procedure for minimizing risks involved in heat treated steel components requires a combination of metallurgical failure analysis and fitness for service with respect to safety and reliability based on risk analysis. This chapter begins with an overview of heat treat processing of steels. This is followed by sections on various aspects of heat treatment design and heat treating practices for minimizing distortion. Influence of design, steel grade, and condition is then illustrated in the examples of failures due to heat treatment. A procedure is analyzed to improve the performance of the design process of a component. A heat-transfer model, coupling with a phase transformation model, a thermomechanical model, and a thermochemical model, is also considered. The chapter further provides information on the failure aspects of and heat treatment procedures applied to welded components. It ends with a section on risk-based approach applicable to heat treated steel components.

Fault-tree analysis is a graphical technique that identifies all events and combinations of events that can produce an undesired event. This chapter emphasizes several fault-tree analysis concepts, examining with examples how all three categories of charting symbols (events, gates, and transfer symbols) come together to generate a fault-tree analysis.

This chapter covers special fault-tree analysis topics, including the use of transfer symbols, INHIBIT gates, sequential AND gates, state-of-the-part versus state-of-the-system considerations, and the fault tree to identify redundancy-defeating failures.

This chapter, a detailed account of furnaces and related equipment for heat treating, begins by describing three basic modes of heat transmission, namely conduction, convection, and radiation, followed by a discussion on the working principle, applications, advantages, and disadvantages of furnaces classified based on the heat transfer medium employed. The types of furnaces covered are batch-type, continuous-type, liquid bath, fluidized bed, and vacuum. The subsequent sections provide information on furnace parts, fixtures, quenching mediums, and quenching systems. The final section of the chapter describes the types of atmospheres available, emphasizing their applications and limitations.

Contaminants can be a cause of numerous types of system failures. There are numerous techniques for confirming contaminant presence. When the presence of a contaminant is suspected, the failure analysis team must find and eliminate the contaminant source, which can be obvious or quite subtle. This chapter summarizes a few commonly encountered contaminant sources to stimulate the reader's thinking about potential contaminant sources. A case study of titanium component washing at Litton Lasers is presented to illustrate how the presence of contaminants leads to a system failure.

Transistors are the most important active structure of any semiconductor component. Performance characteristics of such devices within the specifications are key to ensuring proper functionality and long-term reliability of the product. In this article, a summary of the semiconductor technology from design to manufacturing and the characterization methods are discussed. The focus is on two prominent MOS structures: planar MOS device and FinFET device. The article covers the device parameters and device properties that determine the design criteria and the device tuning procedures. The discussion includes the effects of drain induced barrier lowering, velocity saturation, hot carrier degradation, and short channel on these devices.

The decomposition of austenite, during controlled cooling or quenching, produces a wide variety of microstructures in response to such factors as steel composition, temperature of transformation, and cooling rate. This chapter provides a detailed discussion on the isothermal transformation and continuous cooling transformation diagrams that characterize the conditions that produce the various microstructures. It discusses the mechanism and process variables of quenching of steel, explaining the factors involved in the mechanism of quenching. In addition, the chapter provides information on the causes and characteristics of residual stresses, distortion, and quench cracking of steel.

Arc welding applies to a large and diversified group of welding processes that use an electric arc as the source of heat to melt and join metals. This chapter provides a detailed overview of specific arc welding methods: shielded metal arc welding, flux cored arc welding, submerged arc welding, gas metal arc welding, gas tungsten arc welding, plasma arc welding, plasma-GMAW welding, electroslag welding, and electrogas welding. The basic characteristics of gases used for shielding during arc welding are briefly discussed.

This chapter targets areas that determine if a change occurred and if the change induced the failure: change or what's different analysis. It describes the different sources of changes that induce process deficiencies: design, process, test and inspection, environmental, supplier lot, aging, and supplier changes. The chapter presents an example of a cluster bomb failure to explain how the failure analysis team found and corrected the failure cause.

Corrosion involves chemical reactions in equilibrium that that are understood through principles of thermodynamics. In practice, the rate at which corrosion reactions occur is the most important consideration. This chapter deals with corrosion kinetics, which allows engineers to to understand rates of corrosion. The discussion covers two kinetic processes, namely electrode reactions at the cathode and anode and conduction of ions in the electrolyte. The chapter also provides information on passivation and its effect on polarization diagrams.

This chapter discusses the application of investment casting to nickel- and cobalt-base superalloys. It describes the production of polycrystalline and single crystal castings, the materials normally used, and the part dimensions and tolerances typically achieved. It explains how patterns, molds, and shells are produced, discusses the practice of directional solidification, and examines an assortment of turbine components cast from nickel- and cobalt-base alloys. The chapter also addresses casting problems such as inclusions, porosity, distortion, core shift, and leaching and explains how to avoid them.

The die casting process is a widely applied technique used by a variety of industries. This chapter reviews the casting design and engineering requirements for optimizing the characteristics of die castings.

Quenching is a critical step in the production of hardened steel. This chapter untangles some of the complexities of the quenching process and its effect on the microstructure and properties of various steels. Making extensive use of cooling curves, it sheds light on the transformations that occur at different cooling rates and the extent to which they can be changed by adjusting quench parameters. It discusses the role of quenching in martempering and austempering along with related problems such as cracking and distortion and the challenges posed by low-hardenability steels. It also discusses the use of various quenchants, including oil, polymer, and molten salt, and explains how to measure and compare their performance using a standard (ISO 9950) test.

This chapter provides a basis for understanding the influence of stainless steel alloy composition and metallurgy on the welding process, which involves complex dynamics associated with melting, refining, and thermal processing. It begins with an overview of the welding characteristics of the categories of stainless steels, namely austenitic, duplex, ferritic, martensitic, and precipitation-hardening stainless steels. This is followed by a discussion of the selection criteria for materials to be welded. Various welding processes used with stainless steel are then described. The chapter ends with a section on some of the practices to ensure safety and weld quality.

Electronics spans a number of devices, their configurations, and properties. A challenge is to identify those electronic subjects essential for failure analysis. This article reviews the normal operation and terminal characteristics of MOSFET. It describes the electronic behavior of bridges, opens, and parametric delay defects, which is essential for understanding the symptoms of a failing IC. These electronic principles are then applied to a CMOS failure analysis technique using a power supply signature analysis.

This chapter discusses the melting and conversion of superalloys and the solidification challenges they present. Superalloys have high solute content which can lead to untreatable defects if they solidify too slowly. These defects, called freckles, are highly detrimental to fatigue life. The chapter explains how and why freckles form as well as how they can be prevented. It describes the criteria for selecting the proper melting method for specific alloys based on melt segregation and chemistry requirements. It compares standard processes, including electric arc furnace/argon oxygen decarburization melting, vacuum induction melting, vacuum arc remelting, and electroslag remelting. It also addresses related issues such as consumable remelt quality, control anomalies, melt pool characteristics, and melt-related defects, and includes a section that discusses the processes involved in converting cast ingots into mill products.

This chapter discusses thermoplastic composite fabrication processes and related equipment and procedures. The discussion covers consolidation and thermoforming operations as well as joining methods.