The gravity permanent mold (GPM) process produces castings of high strength and integrity with good surface finish and consistent dimensions. This chapter lists castings produced using GPM and semipermanent mold (SPM). It illustrates the basic elements of a conventional tilt pour machine. The chapter also provides an overview of the high-volume rotary table, high-volume production rotary manufacturing cell, cycle time planning, sizes of tilt pour machine and table, and improvement of turntable uptime. It also presents some of the common semipermanent molded castings.

This chapter discusses the advantages, limitations, and applications of various aluminum casting processes, namely green sand casting process, air set or no-bake molding process, vacuum molding process, evaporative foam casting process, and die casting process. The processes covered also include gravity permanent molding, low-pressure permanent molding, counter pressure, squeeze casting, investment casting, rapid prototype casting, cast forge hybrid, and semisolid metal processes.

This chapter discusses the various factors pertinent to gravity permanent mold (GPM) castings, along with their advantages, limitations, and significance. The discussion covers the geometric factors, process and manufacturing elements, gating practices, and feeding principles of and pouring systems in GPM. The influences of mold coatings on GPM and low pressure permanent mold castings are described. The chapter also discusses various processes involved in the engineering of core boxes and cooling of GPM for casting integrity and cycle time control. It provides information on some of the processes involved in post-casting operations, namely de-coring and de-gating. The key design aspects for consideration in water quenching during the T6 heat treatment are reviewed. The chapter also provides information on two critical cycle events important in engineering at the manufacturing facility: tipper cycle planning and table or cell cycle planning.

Molding flasks and other supplementary equipment are essential for molding complex shapes at competitive production rates and costs. This chapter addresses the design aspects of molding flasks and accessories, the features and handling accessories of molding machines, core making machines and innovations for productivity and quality, and automated core-setting aids.

The melting furnace is a critically important piece of equipment in a foundry; it influences the balance between the metal required by molding machines and the melting capacity. This chapter presents the features, types, advantages, and applications of furnaces suitable for iron and steels such as cupolas, induction furnaces, and arc furnaces.

The casting engineer contributes to a successful component design by offering expertise in molding, core making, and material characteristics and by recommending the most suitable casting process to use to meet quality and cost targets. The casting engineer's responsibilities include recommending locator positioning; advising about lugs, hooks, or holes for casting handling through all processes; determining the choice of a parting plane and pouring orientation; designing cores for accurate positioning, suitable venting, and proper cleaning; guiding decisions about wall thicknesses and junctions; making suggestions about casting design to eliminate distortion; optimizing the gating design for slag-free metal; and establishing the feeding techniques to eliminate shrink porosity. This chapter provides the guidelines for these responsibilities. In addition, the guidelines for the use of chaplets and chills in cast iron castings; guidelines for drafts, machine stock, tolerances, and contraction or shrink rule; and guidelines for pattern layouts and nesting are also covered.

The low-pressure permanent molding (LPPM) and semipermanent molding (LPSPM) processes are versatile, and they meet the quality requirements of a variety of high-integrity, large-sized, and thin-walled aluminum castings for various industries. This chapter presents the major features, operation sequence, advantages, and applications of LPPM, LPSPM, and counter-pressure casting.

This chapter highlights the different melting, holding, and dosing furnaces that are available for the alternative casting processes used for the production of aluminum castings. Melting furnaces are grouped into four broad categories: crucible furnaces; reverberatory furnaces (or reverbs); stack melting furnaces (also called stack melters), tower melting furnaces, or jet melting furnaces; and electric coreless induction furnaces are detailed in this chapter. Factors influencing the choice of the melting, holding, and dozing equipment are presented. Equipment for recycling machined chips is also addressed.

This chapter describes various aspects of the billet making process and how they affect the quality of aluminum extrusions. It begins with an overview of the direct-chill continuous casting technique and its advantages over other methods, particularly for hard aluminum alloys. It then discusses the influence of casting variables, including pouring temperature and cooling rate, and operating considerations such as the make-up of charge materials, fluxing and degassing procedures, and grain refining. The chapter also provides information on vertical and horizontal casting systems, billet homogenization, and the cause of casting defects, including cracking and splitting, segregation, porosity, and grain growth.

This chapter covers the practices and procedures used for shape casting metals and alloys. It begins with a review of the factors that influence solidification and contribute to the formation of casting defects. It then describes basic melting methods, including induction, cupola, crucible, and vacuum melting, and common casting techniques such as sand casting, plaster and shell casting, evaporative pattern casting, investment casting, permanent mold casting, cold and hot chamber die casting, squeeze casting, semisolid metal processing, and centrifugal casting.

This chapter discusses the melting and conversion of superalloys and the solidification challenges they present. Superalloys have high solute content which can lead to untreatable defects if they solidify too slowly. These defects, called freckles, are highly detrimental to fatigue life. The chapter explains how and why freckles form as well as how they can be prevented. It describes the criteria for selecting the proper melting method for specific alloys based on melt segregation and chemistry requirements. It compares standard processes, including electric arc furnace/argon oxygen decarburization melting, vacuum induction melting, vacuum arc remelting, and electroslag remelting. It also addresses related issues such as consumable remelt quality, control anomalies, melt pool characteristics, and melt-related defects, and includes a section that discusses the processes involved in converting cast ingots into mill products.

This chapter provides a brief overview of iron and steel manufacturing and the major equipment involved in the process as well as identifying where casting fits into the overall process. In addition, it provides an overview of cast iron manufacturing, including the processes involved in converting pig iron into cast iron and steel.