Search Results for symbol

Fig. 10.19 Edge dislocations of opposite sign (shown by ┴ shaped symbol) moving along glide planes to condense and increase size of nucleus ( N ). Source: Ref 10.6 More

Fig. 7 Section through an edge dislocation (indicated by the symbol ⊥) with an axis perpendicular to the plane of the illustration and line dislocation. (a) Positive edge dislocation, (b) negative edge dislocation More

Fig. 6.28 Fracture mechanics approach to life. The symbol “ a ” represents crack length, and the critical crack length ( a c ) is calculated from the fracture toughness ( K Ic ) and yield strength (YS). More

Fig. 2.13 Section through an edge dislocation (indicated by the symbol ⊥) with an axis perpendicular to the plane of the illustration and line dislocation. (a) Positive edge dislocation, (b) negative edge dislocation More

Fig. 4 Pitting (filled symbols) and repassivation (open symbols) in 1 M NaCl as a function of temperature for different grades of stainless steel. SCE, saturated calomel electrode. Source: Ref 40 More

Fig. 4 Strain amplitude vs. reversals to failure for uncarburized (solid symbols) and carburized (open symbols) 4027 steel (0.80% Mn, 0.28% Si, 0.27% Mo). Source: Ref 6 More

Fig. 14.1 Recycling symbols for polymers. (1) Polyethylene terephthalate, also indicated by PET and called polyester. (2) High-density polyethylene (also PE-HD).(3) Polyvinyl chloride, or PVC. (4) Low-density polyethylene (PE-LD), or LLDPE for very-low-density polyethylene. (5) Polypropylene More

Fig. 8.12 Symbols used in the analysis of cup drawing. Source: Ref 8.2 More

Fig. 10.6 Comparison of measured tensile strength (square symbols) and surface-diffusion-predicted strength evolution (model) for 60 min sintering in hydrogen at various temperatures. Experimental data are scattered due to factors such as delta ferrite content and grain size effects. More

Fig. 5.3 Experimental values (+ symbols) of the passivating potential, E pp , of iron plotted to show the relationship to selected phase boundaries from Fig. 5.2 . Dashed lines are extrapolations of lines 13 and 17. Based on Ref 2 More