This chapter discusses the forming characteristics of dual-phase (DP) and transformation-induced plasticity (TRIP) steels. It begins with a review of the mechanical behavior of advanced high-strength steels (AHSS) and how they respond to stress-strain conditions associated with deformation processes such as stretching, bending, flanging, deep drawing, and blanking. It then describes the complex tribology of AHSS forming operations, the role of lubrication, the effect of tool steels and coatings, and the force and energy requirements of various forming presses. It also discusses the cause of springback and explains how to predict and compensating for its effects.

High-strength steels are susceptible to stress-corrosion cracking (SCC) even in moist air. This chapter identifies such steels and the applications where they are typically found. It provides information on crack growth kinetics and crack propagation models in which hydrogen embrittlement is the predominant mechanism. It explains how different application variables affect SCC, including loading mode, state of stress, type of steel, temperature, electrochemical potential, heat treatment, and deformation processes. It also compares SCC characteristics in different high-strength steels and discusses the influence of composition, steelmaking practice, and application environment.

This article discusses the effect of alloying on high-strength low-alloy (HSLA) steels. It explains where HSLA steels fit in the continuum of commercial steels and describes the six general categories into which they are divided. It provides composition data for standard types or grades of HSLA steel along with information on available mill forms, key characteristics, and intended uses. The article explains how small amounts of alloying elements, particularly vanadium, niobium, and titanium, control not only the properties of HSLA steels, but also their manufacturability.

This chapter examines the phenomena of deformation and fracture in metals, providing readers with an understanding of why it occurs and how it can be prevented. It begins with a detailed review of tension and compression stress-strain curves, explaining how they are produced and what they reveal about the load-carrying characteristics of engineering materials. It then discusses the use of failure criteria and the determination of yielding and fracture limits. It goes on to describe the mechanisms and appearances of brittle and ductile fractures and stress rupture, providing detailed images, diagrams, and explanations. It discusses the various factors that influence strength and ductility, including grain size, loading rate, and temperature. It also provides information on the origin of residual stresses, the concept of toughness, and the damage mechanisms associated with creep and stress rupture, stress corrosion, and hydrogen embrittlement.

This chapter examines the stress-strain characteristics of metals and alloys subjected to cyclic loading and the cumulative effects of fatigue. It begins by explaining how a single load reversal can lower the yield stress of a material and how repeated reversals can cause strain hardening and softening, both of which lead to premature failure. It then discusses the stages of fatigue fracture, using detailed images to show how cracks initiate and grow and how they leave telltale marks on fracture surfaces. It goes on to describe fatigue life assessment methods and demonstrate their use on different metals and alloys. The chapter also discusses design-based approaches for preventing fatigue failures.

This chapter provides an overview of the nomenclature, generations, and thermomechanical processing of advanced high-strength steels (AHSS) and provides information on the development of microstructure. It also presents a review of the mechanical property trends of AHSS.

This chapter summarizes the performance attributes of advanced high-strength steels, namely stiffness, strength, strain hardening, fatigue, crashworthiness, formability, toughness, and bake hardening.

This chapter reviews the nomenclature of different vehicle components helpful in identifying the target applications and discusses the implementation of advanced high-strength steels (AHSS) in automotive and nonautomotive industries. In addition, the chapter provides information on the utilization and trends of AHSS in vehicle bodies and closures.

This chapter describes the nature of the problems arising from using advanced high-strength steels (AHSS) and discusses potential remedies to minimize the adverse effects that may limit the adoption of AHSS in the automotive industry. The discussion provides information on press energy, springback, residual stress, die wear, hot forming, downgaging limits, welding, binders, draw beads, and tool material wear.

This chapter provides information on ultra-light steel family research programs conducted by the global steel industry under the umbrella of WorldAutoSteel. It discusses the collaboration efforts between U.S government, industry, and academia on advanced high-strength steels (AHSS) technology. Some of the projects on AHSS research and development are also reviewed.

This chapter briefly reviews the experience-based guidelines that were developed for forming and welding advanced high-strength steels (AHSS). It discusses the benefits of using HSS in car body structures and components that are analyzed by the performance indices developed for materials selection.

Improvement in processing, material substitution, light weighting, and recycling have contributed immensely to the cause of sustainability in the materials cycle. This chapter discusses some of the key indicators of sustainability that have direct relevance to advanced high-strength steels (AHSS) used in a vehicle. The discussion covers the major contributor to greenhouse gas emissions, production routes for manufacturing crude steel, and an optimized index guideline for selecting the best material. Details on the benefits of AHSS on the life cycle of vehicles are provided. The chapter also provides information on recycling and the economics of AHSS.

This chapter focuses on key requirements for obtaining third-generation advanced high-strength steels (AHSS). The discussion covers the microstructure design for AHSS, novel AHSS processing routes, the development of nanostructured AHSS, and the development of third-generation AHSS by the Integrated Computational Materials Engineering approach.

The relationship of stress and strength gradients must be considered simultaneously in analysis of a particular type of fracture. This chapter discusses the principal elastic stress distribution in members of various shapes under different types of pure loads. A basic understanding of both the stress and strength gradients of metal parts with and without stress concentrations and under different types of loading is provided. The chapter also describes the effect of service conditions on applied stresses.

This article addresses critical aspects in bond testing of thermal spray coatings and provides step-by-step guidance for obtaining representative and reproducible test results based on ASTM C633 and other applicable industry standards. It clarifies details of ASTM C633 requirements and provides examples of the best practice confirmed by hundreds of tests performed worldwide, adopted by numerous industrial standards, and requested to comply with international technical standardization and certification organizations such ISO, AS, SAE, and Nadcap.

This chapter presents a discussion on the importance, types, applications, and advantages of advanced high-strength steel. It also provides a discussion on steelmaking technology.

This chapter presents the nomenclature, generations, thermomechanical processing, microstructure development, and mechanical properties of advanced high-strength steels.

The performance attributes of advanced high-strength steels are summarized in this chapter. These attributes include stiffness, strength, strain hardening, fatigue, crashworthiness, formability, toughness, and bake hardening.

Advanced high-strength steels (AHSS) are best used for strong structural applications where lightweighting enhances the performance of a product. This chapter focuses on the applications of AHSS in the automotive industry. It explains the effect of automotive processing on AHSS components. The chapter also presents the nonautomotive applications of AHSS. It also provides the uses and trends of AHSS.