Search Results for standard reference materials

Specific heat and thermal expansion are closely related. Following a discussion on thermal expansion theory, methods of measurement techniques are presented along with their advantages and disadvantages. The results of the measurements are then summarized for three classes of materials: metallics, nonmetallics, and composites. Because predicting thermal expansion values for unmeasured or novel materials is useful, the chapter also describes the means of making educated guesses for low-temperature values. A short discussion on how thermal expansion data can be used is followed by a section describing where such data can be found.

This chapter discusses the characteristics, advantages, and disadvantages of nondestructive hardness testing methods for metals, including electromagnetic impulse testing, photothermal testing, scratch hardness testing, and ultrasonic contact impedance testing. It also discusses the use of ultrasound to determine the depth of hardening in a metal or alloy. The chapter reviews methods used to check and calibrate hardness testing machines and indenters and the use of hardness reference blocks for verification and calibration of test machines. It also addresses conversion of hardness values determined by one method to equivalent values for a different method.

This appendix provides information on organizations that issue specifications and standards related to titanium and its alloys.

When a material is sintered and evaluated for performance, the primary focus is on mechanical properties. This chapter discusses structural properties for representative materials. Some guidelines are presented on the types of tests and how property values depend on the testing procedure. Mechanical hardness and strength tabulations are provided to document sintered properties.

This article focuses on friction and wear as they relate to polymeric materials, covering friction and wear applications for polymeric materials. The discussion covers the causes and mechanisms of friction, wear, and lubrication; different test methods developed to simulate friction and wear mechanisms; and friction and wear test data used for polymeric materials.

This chapter reviews the general principles involved in codifying standards and describes the historical development of materials testing standards. It provides information on the standards related to the Brinell, Vickers, Rockwell, and Knoop methods as well as those for the instrumented indentation test and hardness conversions.

This chapter discusses the history of hardness testing and defines the term hardness. It describes the interrelationship between material structure and hardness and the relationships between hardness and other mechanical material properties. In addition, information on the hardness unit and traceability of the hardness measurement are provided.

This chapter discusses the role of standards and specifications for steel castings. It defines specifications and discusses how certification, testing, examination, methods, practices, procedures, compositions, properties, facilities, statistical process control, and documentation relate to codes and standards. The chapter describes processes involved in the selection of specifications for steel castings. Further, it provides information on the cost of specifications.

Corrosion testing and monitoring are powerful tools in the fight to control corrosion. This chapter provides a general overview of three major categories of corrosion tests, namely laboratory tests, pilot-plant tests, and field tests. It begins with brief sections describing the purposes of corrosion tests, the logical steps in a test program, and the preparation and cleaning of test specimens. The focus then moves on to discuss the types and applications of these test categories and the associated evaluation procedures. Excluding electrochemical tests which are addressed separately in this chapter, the other laboratory tests covered under this category are simulated atmosphere tests, salt-spray tests, and immersion tests. Only corrosion testing in the atmosphere is discussed in the section on field tests. Corrosion monitoring techniques are finally considered, covering the characteristics of corrosion monitoring techniques, the factors to be considered in selecting a corrosion-monitoring method, and the strategies in corrosion monitoring.

This chapter addresses some of the challenges involved in materials selection, providing context for much of the information presented in the book. It describes a typical four-step design scenario, noting material-related considerations and information needs. It explains how design decisions are complicated by the interconnected nature of material properties, design geometry, and manufacturing requirements and effects. The chapter also assesses the design impact of several materials and discusses codes, standards, and specifications.

This chapter focuses on engineering drawings for casting production, providing information on machining and casting drawings and machining and tooling references.

This chapter discusses some of the ways that the lessons learned from failures have benefitted society, leading to improved product designs, better materials, safer industrial processes, and more robust codes and standards. It also provides several examples of how the technology and procedures associated with aviation security have been upgraded in the wake of air disasters.

Instrumented indentation hardness testing significantly expands on the capabilities of traditional hardness testing. It employs high-resolution instrumentation to continuously control and monitor the loads and displacements of an indenter as it is driven into and withdrawn from a material. The scope of application comprises displacements even smaller than 200 nm (nano range) and forces even up to 30 kN . Mechanical properties are derived from the indentation load-displacement data obtained in simple tests. The chapter presents the elements of contact mechanics that are important for the application of the instrumented indentation test. The test method according to the international standard (ISO 14577) is discussed, and this information is supplemented by information about the testing technique and some example applications. The chapter concludes with a discussion on the extensions of the standard that are expected in the future (estimation of the measurement uncertainty and procedures for the determination of true stress-strain curves).

This chapter presents the fundamentals of tensile testing of fiber-reinforced polymer composites. Basic tensile testing of polymer composites is divided into lamina and laminate testing. The chapter focuses on tensile testing of laminates. It discusses the most common tensile test methods that have been standardized for fiber-reinforced composite materials. It also briefly reviews considerations in tensile testing of metal-matrix composites.

This chapter is a detailed account of the tensile testing procedure used for evaluating metals and alloys. The discussion covers the stress-strain behavior of metals determined by tensile testing, properties determined from testing, test machines for measuring mechanical properties, and general procedures of tensile testing. Three distinct aspects of standard test methods for tension testing of metallic materials are discussed: test piece preparation, geometry, and material condition; test setup and equipment; and test procedure.

Elastomers comprise a subclass of polymers that display the ability to stretch and recover that is typical of a rubber band. This chapter describes the properties determined by tensile testing of elastomers and the factors influencing them, namely, structuring of the molecular matrix, compounding, specimen preparation, specimen type, vulcanization parameters, and temperature. The chapter also provides information on ASTM D 412, the most widely referenced standard for determining the tensile properties of elastomers.

This article describes the basic approaches to improving the fire resistance of a polymeric material, considers the burning process on a microscale and macroscale, and discusses various test methods for determining the flammability characteristics of polymeric materials. Test methods are classified in two ways: by fire response characteristics and by particular applications of polymeric materials.

This article addresses critical aspects in bond testing of thermal spray coatings and provides step-by-step guidance for obtaining representative and reproducible test results based on ASTM C633 and other applicable industry standards. It clarifies details of ASTM C633 requirements and provides examples of the best practice confirmed by hundreds of tests performed worldwide, adopted by numerous industrial standards, and requested to comply with international technical standardization and certification organizations such ISO, AS, SAE, and Nadcap.

This chapter discusses three measurements parameters: temperature, strain, and magnetic field strength. It stresses the measurement of temperature because it is the primary variable in nearly all low-temperature material properties. The chapter contains information on methods and auxiliary materials. Areas of frequent concern, such as thermal contact, heat leak, thermal anchoring, thermal conductivity of greases, insulators, lead wires, ground loops, and feedthroughs are also reviewed. The chapter provides an overview and historical development of temperature scales because the practical use of all thermometers is associated with some approximation of the thermodynamic temperature scale. A short section is devoted to types of temperature measuring devices. The characteristics of commercially available resistance-type strain gauges at low temperatures are stressed.