The complexity of semiconductor chips and their packages has continuously challenged the known methods to analyze them. With larger laminates and the inclusion of multiple stacked die, methods to analyze modern semiconductor products are being pushed toward their limits to support these 2.5D and 3D packages. This article focuses on these methods of fault isolation, non-destructive imaging, and destructive techniques through an iterative process for failure analysis of complex packages.

Most of the counterfeit parts detected in the electronics industry are either novel or surplus parts or salvaged scrap parts. This article begins by discussing the type of parts used to create counterfeits. It discusses the three most commonly used methods used by counterfeiters to create counterfeits. These include relabeling, refurbishing, and repackaging. The article presents a systematic inspection methodology that can be applied for detecting signs of possible part modifications. The methodology consists of external visual inspection, marking permanency tests, and X-ray inspection followed by material evaluation and characterization. These processes are typically followed by evaluation of the packages to identify defects, degradations, and failure mechanisms that are caused by the processes (e.g., cleaning, solder dipping of leads, reballing) used in creating counterfeit parts.

X-ray imaging systems have long played a critical role in failure analysis laboratories. This article begins by listing several favorable traits that make X-rays uniquely well suited for non-destructive evaluation and testing. It then provides information on X-ray equipment and X-ray microscopy and its application in failure analysis of integrated circuit (IC) packaging and IC boards. The final section is devoted to the discussion on nanoscale 3D X-ray microscopy and its applications.

As semiconductor feature sizes have shrunk, the technology needed to encapsulate modern integrated circuits has expanded. Due to the various industry changes, package failure analyses are becoming much more challenging; a systematic approach is therefore critical. This article proposes a package failure analysis flow for analyzing open and short failures. The flow begins with a review of data on how the device failed and how it was processed. Next, non-destructive techniques are performed to document the condition of the as-received units. The techniques discussed are external optical inspection, X-ray inspection, scanning acoustic microscopy, infrared (IR) microscopy, and electrical verification. The article discusses various fault isolation techniques to tackle the wide array of failure signatures, namely IR lock-in thermography, magnetic current imaging, time domain reflectometry, and electro-optical terahertz pulse reflectometry. The final step is the step-by-step inspection and deprocessing stage that begins once the defect has been imaged.

Brazing and soldering processes use a molten filler metal to wet the mating surfaces of a joint, with or without the aid of a fluxing agent, leading to the formation of a metallurgical bond between the filler and the respective components. This chapter discusses the characteristics, advantages, and disadvantages of brazing and soldering. The first part focuses on the fundamentals of the brazing process and provides information on filler metals and specific brazing methods. The soldering portion of the chapters provides information on solder alloys used, selection criteria for base metal, the processes involved in precleaning and surface preparation, types of fluxes used, solder joint design, and solder heating methods.

This chapter presents several materials and processes related to soldering technology. It first provides information on lead-free solders, followed by sections devoted to flip-chip processes, diffusion soldering, and modeling. Scanning acoustic microscopy and fine-focus x-ray techniques are also discussed. The chapter describes several evaluation procedures and tests developed to measure solderability and standards for process calibration. The chapter also describes the characteristics of reinforced solders, amalgams used as solders, and other strategies to boost the strength of solders. Further, the chapter considers methods for quantifying the mechanical integrity of joints and predicting their dimensional stability under specified environmental conditions. It discusses the effects of rare earth elements on the properties of solders. The chapter concludes with information on advanced joint characterization techniques.

Materials used in joining, whether solders, fluxes, or atmospheres, are becoming increasingly subjected to restrictions on the grounds of health, safety, and pollution concerns. These regulations can limit the choice of materials and processes that are deemed acceptable for industrial use. The chapter addresses this issue with a focus on soldering fluxes. The chapter also describes factors related to soldering under a protective atmosphere, provides information on chemical fluxes for soldering of various metals, and discusses the processes involved in fluxless soldering processes.

In embedded systems, the separation between system level, board level, and individual component level failure analysis is slowly disappearing. In order to localize the initial defect area, prepare the sample for root cause analysis, and image the exact root cause, the overall functionality has to be maintained during the process. This leads to the requirement of adding additional techniques that help isolate and image defects that are buried deeply within the board structure. This article demonstrates an approach of advanced board level failure analysis by using several non-destructive localization techniques. The techniques considered for advanced fault isolation are magnetic current imaging for shorts and opens; infrared thermography for electrical shorts; time-domain-reflectometry for shorts and opens; scanning acoustic microscopy; and 2D/3D X-Ray microscopy. The individual methods and their operational principles are introduced along with case studies that will show the value of using them on board level defect analysis.

Post-mortem analysis of photovoltaic modules that have degraded performance is essential for improving the long term durability of solar energy. This article focuses on a general procedure for analyzing a failed module. The procedure includes electrical characterization followed by thermal imaging such as forward bias, reverse bias, and lock-in, and emission imaging such as electroluminescence and photoluminescence imaging.

This chapter focuses on common failure characteristics exhibited by mechanical and electrical components. The topic is considered from two perspectives: one possibility is that the system failed because parts were nonconforming to drawing requirements and another possibility is that the system failed even though all parts in the system met their drawing requirements. The common failures discussed in this chapter include those associated with metallic components, composite materials, plastic components, ceramic components, and electrical and electronic components.

Soldering and brazing represent one of several types of methods for joining solid materials. These methods may be classified as mechanical fastening, adhesive bonding, soldering and brazing, welding, and solid-state joining. This chapter summarizes the principal characteristics of these joining methods. It presents a comparison between solders and brazes. Further details on pressure welding and diffusion bonding are also provided. Key parameters of soldering are discussed, including surface energy and surface tension, wetting and contact angle, fluid flow, filler spreading characteristics, surface roughness of components, dissolution of parent materials and intermetallic growth, significance of the joint gap, and the strength of metals. The chapter also examines the principal aspects related to the design and application of soldering processes.

The scanning acoustic microscope (SAM) is an important tool for development of improved molded and flip chip packages. The SAM used for integrated circuit inspection is a hybrid instrument with characteristics of both the Stanford SAM and the C-scan recorder. This chapter presents the historical development of SAM for integrated circuit package inspection, SAM theory, and analysis considerations. Case studies are presented to illustrate the practical applications of SAM. Other non-destructive imaging tools are briefly discussed, as well as SAM challenges and methods including spectral signature analysis and GHz-SAM.

There are several analytical methods available that can be used in-line on whole wafers as well as off-line on de-processed products that are returned from the field. These techniques are surface analytical techniques that can be used to characterize the bulk of the material. The main six methods used in semiconductor industry are: Auger spectroscopy, dynamic secondary ion mass spectroscopy, time of flight static secondary ion mass spectroscopy (ToF-SIMS), X-ray photoelectron spectroscopy, scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX), and transmission electron microscope-EDX. This review specifically addresses ToF-SIMS and describes some typical examples of the application of Auger and SEM-EDX.