Titanium alloys are classified according to the amount of alpha and beta phase material retained in their structures at room temperature. This chapter discusses the metallurgy, composition, processing, and properties of titanium and its alloys. It provides information on melting, forging, casting, heat treating, and secondary fabrication. It also discusses the advantages and disadvantages of titanium and its alloys in various applications.

Superalloys are nickel, iron-nickel, and cobalt-base alloys designed for high-temperature applications, generally above 540 deg C. This chapter covers the metallurgy, composition, and properties of cast and wrought superalloys. It provides information on melting, heat treating, and secondary fabrication processes. It also covers coating technology, including aluminide diffusion and overlay coatings, and addresses the advantages and disadvantages of superalloys in various applications.

Titanium is a lightweight metal used in a growing number of applications for its strength, toughness, stiffness, corrosion resistance, biocompatibility, and high-temperature operating characteristics. This chapter discusses the applications, metallurgy, properties, compositions, and grades of commercially pure titanium and alpha and near-alpha, alpha-beta, and beta titanium alloys. It describes primary and secondary fabrication processes, including melting, forging, forming, heat treating, casting, machining, and joining as well as powder metallurgy and direct metal deposition. It also compares and contrasts the properties of wrought, cast, and powder metal titanium products and discusses corrosion behaviors.

Polymer-matrix composites are among the lightest structural materials in use today. They are also highly resistant to corrosion and fatigue and their load-carrying capabilities, such as strength and stiffness, can be tailored for specific applications. This chapter discusses the primary advantages and disadvantages of polymer-matrix composites, how they are produced, and how they perform in different applications. It describes the construction of laminates, the fibers and resins used, and the methods by which they are combined. It explains how strength, modulus, toughness, and high-temperature and corrosion behaviors are determined by the orientation, shape, and spacing of fibers, the number of plies, resin properties, and consolidation and forming methods. The chapter also covers secondary fabrication processes, such as thermoforming, machining, and joining, as well as production equipment and product forms, and include guidelines for optimizing tradeoffs when selecting fibers, resins, and production techniques.

This chapter describes the basic steps in the production of titanium ingots and their subsequent conversion to standards product forms. It explains how titanium ore is reduced to a spongy residue, then granularized, compacted, and melted (along with alloying additions) to form an ingot, which may be remelted several times to achieve the necessary properties. It also discusses the cause of defects and ingot imperfections and the benefits of billet reduction and grain-refinement processes.

With the commercialization of heavier and lighter ion beams, adoption of focused ion beam (FIB) use for analysis of challenging regions of interest (ROI) has grown. In this chapter, the authors focus on highlighting commercially available and complementary FIB technologies and their implementation challenges and application trends.

Coil design for induction heating has been developed and refined over time based on the theoretical principles applied in practice to several simple inductor geometries such as the classical solenoidal coil. This chapter reviews the fundamental considerations in the design of inductors and describes some of the most widely used coils and common design modifications. Specialty coil designs for specific applications are also discussed. The chapter concludes with sections devoted to coil fabrication and design of power-supply leads.

This chapter discusses the advantages and disadvantages of metal matrix composites and the methods used to produce them. It begins with a review of the composition and properties of aluminum matrix composites. It then describes discontinuous composite processing methods, including stir and slurry casting, liquid metal infiltration, spray deposition, powder metallurgy, extrusion, hot rolling, and forging. The chapter also provides information on continuous-fiber aluminum and titanium composites as well as particle-reinforced titanium and fiber metal (glass aluminum) laminates.

Metal-matrix composites can operate at higher temperatures than their base metal counterparts and, unlike polymer-matrix composites, are nonflammable, do not outgas in a vacuum, and resist attack by solvents and fuels. They can also be tailored to provide greater strength and stiffness, among other properties, in preferred directions and locations. This chapter discusses the processes and procedures used in the production of fiber-reinforced aluminum and titanium metal-matrix composites. It explains how the length and orientation of reinforcing fibers affect the properties and processing characteristics of both aluminum and titanium composites. It also provides information on fiber-metal laminates and the use of different matrix metals and reinforcing materials.

This chapter covers the basics of weldability of cast steels such as carbon and low alloy steels, corrosion-resistant high alloy steels, nickel-base alloys, heat-resistant high alloy steels, and wear-resistant high austenitic manganese steels. It provides an overview of weld overlay and hard facing; cast-weld construction; and plasma arc cutting and plasma arc welding. The chapter discusses different types of welding processes. These include shielded metal-arc welding, air carbon arc cutting process, gas tungsten-arc welding, gas metal-arc welding process, flux-cored arc welding, submerged arc welding, and electroslag and electro-gas welding.

This chapter provides an introduction to powder processing of binders and polymers. It sets the context for the remainder of the book by providing an overview of the topics discussed in the subsequent chapters and by providing introduction to powder-binder fabrication and customization of feedstock and describing the challenges in component production. The chapter also summarizes alphabetically a few key concepts in powder-binder processing.

This article examines the role of alloying in the production and use of nickel and its alloys. It explains how nickel-base alloys are categorized and lists the most common grades along with their compositional ranges and corresponding UNS numbers. It describes the role of nearly 20 alloying elements and how they influence strength, ductility, hardness, and corrosion resistance. It also addresses processing issues, explaining how alloying and intermetallic phases affect forming, welding, and machining operations.

Achieving the best-performing composite part requires that the processing method and cure cycle create high-quality, low-void-content structures. If voids are present, the performance of the composite will be significantly reduced. There are multiple causes of voids in composite materials; they are generally categorized as voids that are due to volatiles (such as solvents, water) or voids that result from entrapped air. This chapter describes the analysis of various types of voids. It reviews techniques for analysis of voids at ply-drops, voids due to high fiber packing, and voids that occur in honeycomb core composites. The final section of the chapter discusses void documentation through the use of nondestructive inspection techniques and density/specific gravity measurement methods.

Almost all metals and alloys are produced from liquids by solidification. For both castings and wrought products, the solidification process has a major influence on both the microstructure and mechanical properties of the final product. This chapter discusses the three zones that a metal cast into a mold can have: a chill zone, a zone containing columnar grains, and a center-equiaxed grain zone. Since the way in which alloys partition on freezing, it follows that all castings are segregated to different categories. The different types of segregation discussed include normal, gravity, micro, and inverse. The chapter also provides information on grain refinement and secondary dendrite arm spacing and porosity and shrinkage in castings. It concludes with a brief overview of six of the most important casting processes in industries: sand casting, plaster mold casting, evaporative pattern casting, investment casting, permanent mold casting, and die casting.

This chapter discusses the composition, properties, and uses of the most common beryllium alloys and composites. It provides information on beryllium-aluminum, beryllium-copper, and beryllium-titanium as well as beryllium-antimony and beryllium-iron systems.

This article is intended to help engineers understand why the fatigue behavior of weldments can be such a confusing and seemingly contradictory topic and hopefully to clarify this complex subject. It first reexamines the factors influencing the fatigue behavior of an individual weldment using extensive experimental data and a computer model that simulates the fatigue resistance of weldments. Next, the process of fatigue in weldments is discussed in general terms, and the service conditions that favor long crack growth and the conditions that favor crack nucleation are contrasted. The article then presents experimental data that show the effect of weldment geometry on fatigue resistance. Several useful geometry classification systems are compared. Finally, a computer model is employed to investigate the behavior of two hypothetical weldments: a discontinuity-containing ("Nominal") weldment and a discontinuity-free ("Ideal") weldment.

Aluminum is the second most widely used metal in the world. It is readily available, offers a wide range of properties, and can be shaped, coated, and joined using a variety of methods. This chapter discusses some of the key attributes of wrought and cast aluminum alloys and the classifications, designations, and grades of available product forms. It also explains how aluminum alloys are used in aerospace, automotive, rail, and marine applications as well as in building and construction, electrical products, manufacturing equipment, packaging, and consumer durables such as appliances and furniture.

This chapter discusses the principles of scanning transmission electron microscopy (STEM) as implemented using conventional scanning electron microscopes (SEMs). It describes the pros and cons of low-energy imaging and diffraction, addresses basic hardware requirements, and provides information on imaging modes, detector positioning and alignment, and the effect of contrast reversal. It also discusses beam convergence and angular selectivity, the use of application-specific masks, and how to generate grain orientation maps for different material systems.

This chapter discusses the composition, alloying characteristics, mechanical properties, corrosion resistance, advantages, limitations, and applications of martensitic, semiaustenitic, and austenitic precipitation-hardenable stainless steels.

Circuit edit has been instrumental to the development of focused ion beam (FIB) systems. FIB tools for advanced circuit edit play a major role in the validation of design and manufacture. This chapter begins with an overview of value, role, and unique capabilities of FIB circuit edit tools for first silicon debug. The etching capabilities of circuit edit FIB tools are then discussed, providing information on chemistry assisted etching in silicon oxides and low-k dielectrics. The chapter also discusses the requirements and procedures involved in edit operation: high aspect ratio milling, endpointing, and cutting copper. It then provides an introduction to FIB metal/conductor deposition and FIB dielectric deposition. Edit design rules that can facilitate prototype production from first silicon are also provided. The chapter concludes with a discussion on future trends in circuit edit technology.