Search Results for satellite components

The technology of fabricating composite hardware and structures by filament winding has evolved empirically through the development and manufacturing of specific components. This chapter reviews areas of technology used in building composite parts and discusses the processes from which the current technology was derived. The discussion covers quality control requirements for composite fabrication technology and cleanliness standards in the workplace. It describes technology developed for specific components, including satellites struts, aircraft hydraulic cylinders, drill pipe, drive shafts, couplings, and cryogenic tubing.

Beryllium is an extraordinary metal with an unusual combination of physical and mechanical properties. It has low density, high stiffness, and excellent dimensional stability. It is also transparent to x-rays and can be machined to extremely close tolerances. This chapter discusses the properties, compositions, and processing characteristics of beryllium and its alloys. It provides information on powder production and consolidation, commercial designations and grades, wrought products, and forming processes. It also discusses the issue of corrosion, the use of protective treatments and coatings, and health and safety concerns.

This chapter discusses the setup and use of a transmission electron detector in a typical scanning electron microscope (SEM). It describes the arrangement and function of the primary components in the detector, following the signal path from the sample to a micromirror array where it is directed by the user to either a CMOS sensor (to record diffraction patterns) or a photomultiplier tube (to observe real-space images). The chapter discusses some of the nuances of digital imaging and diffraction and includes examples in which transmission electron detectors are used to analyze gold films, carbon nanotubes, zeolite sheets, and monolayer graphene. It also describes emerging techniques, including four-dimensional STEM, thermal diffuse scattering, energy filtering, aberration correction, and atomic resolution imaging.

Beryllium, despite its relatively simple atomic structure, possesses a wide range of useful engineering properties. It has the highest strength-to-weight ratio and modulus of elasticity among structural metals and is an important alloy addition in copper, nickel, and aluminum alloys. It also has excellent thermal properties, low atomic mass, a small x-ray absorption cross section, and a large neutron scattering cross section. This brief introductory chapter provides an overview of the unique qualities of beryllium along with typical applications and uses.

This chapter gives a brief review of the development of additive manufacturing (AM) and the appeal of different of different AM methods.

This chapter discusses the effect of powder metallurgy on the design and production of nuclear energy reactors, wind turbines, biomedical devices, and gas turbine engines.

Polymer composite materials are subject to degradation if not appropriately protected from the environment. Composite materials having polymeric matrices are susceptible to degradation from heat, sunlight, ozone, atomic oxygen (in space), moisture, solvents (chemicals), fatigue, excessive loading, and combinations of these environmental conditions. This chapter discusses the effects of heat, ultraviolet-light, and atomic oxygen on composite materials.

This chapter describes aluminum applications in aircraft and space vehicles and the special alloys, tempers, and product forms required to meet the unique challenges of flight. It focuses on wrought alloys and products that comprise the bulk of aluminum aircraft structure. The chapter also provides a list of the aerospace alloys and their chemical compositions in common use as well as their application on aircraft.

This chapter provides an overview of the physical metallurgy of beryllium, discussing phases and phase transformations, physical and mechanical properties, heat treatment, and alloying. It explains how the atomic structure of beryllium, particularly its sp hybrid state, contributes to the anisotropy of elastic constants and slip properties, resulting in a specific stiffness, or modulus-to-density ratio, six times higher than that of any other structural material.

Metal-matrix composites can operate at higher temperatures than their base metal counterparts and, unlike polymer-matrix composites, are nonflammable, do not outgas in a vacuum, and resist attack by solvents and fuels. They can also be tailored to provide greater strength and stiffness, among other properties, in preferred directions and locations. This chapter discusses the processes and procedures used in the production of fiber-reinforced aluminum and titanium metal-matrix composites. It explains how the length and orientation of reinforcing fibers affect the properties and processing characteristics of both aluminum and titanium composites. It also provides information on fiber-metal laminates and the use of different matrix metals and reinforcing materials.

Cold spray is a process technology that, for the first time, enables the rapid deposition of a wide range of metals and some other materials in the solid state at temperatures far below their melting points. This chapter provides an overview of the processes involved in cold spray process technologies, namely high-pressure cold spray (HPCS) and low-pressure cold spray (LPCS), explaining differences of LPCS from HPCS. It summarizes the historical background of the cold spray process. The growing international interest in the cold spray process from the early 2000s is also reviewed.

This chapter describes incremental sheet forming processes, including single-point, two-point, and kinematic (two tool) techniques. It provides information on the tooling and equipment used, work flow and forming parameters, process mechanics and forming limits. It also discusses multistage forming strategies, process modeling and simulation, and advanced hybrid forming processes.

Aluminum is the second most widely used metal in the world. It is readily available, offers a wide range of properties, and can be shaped, coated, and joined using a variety of methods. This chapter discusses some of the key attributes of wrought and cast aluminum alloys and the classifications, designations, and grades of available product forms. It also explains how aluminum alloys are used in aerospace, automotive, rail, and marine applications as well as in building and construction, electrical products, manufacturing equipment, packaging, and consumer durables such as appliances and furniture.

Engineers have many materials to choose from when dealing with weight-related design constraints. The list includes aluminum, beryllium, magnesium, and titanium alloys as well as engineering plastics, structural ceramics, and polymer-, metal-, and ceramic-matrix composites. This chapter provides a brief overview of these lightweight materials, discussing their primary advantages along with their properties, behaviors, and limitations.

This chapter details aluminum products most familiar to consumers including cookware, electronics and TVs, home interiors, luggage and briefcases, and outdoor furniture. Aluminum in art is also discussed.

This chapter introduces the key powder fabrication attributes to assist in the identification of the right powders for an application. First, it describes the characteristics of engineering powders such as particle size distribution, powder shape and packing density, surface area, powder flow and rheology, and chemical analysis. The chapter then describes the general categories of powder fabrication methods, namely mechanical comminution, electrochemical precipitation, thermochemical reaction, and phase change and atomization. It provides information on the two largest contributors to powder price, namely raw material cost and conversion cost. The applicability of various processes to specific material systems is mentioned throughout this chapter.

This chapter presents the following groupings of metals and alloys that are soldered together: steel and iron-base alloys, aluminum and aluminum alloys, and copper and copper alloys. It also presents the ancillary materials and process methods that assist the solder filler metal in completing the solder joint through induction heating. The chapter focuses on the selection of fluxes and the use of inert gases or even vacuum to realize an oxide-free base material surface both before and during the soldering process.

This chapter describes the applications with the greatest impact on titanium consumption and global market trends. It explains where, how, and why titanium alloys are used in aerospace, automotive, chemical processing, medical, and military applications as well as power generating equipment, sporting goods, oil and gas production, and marine vessels.

Casting is the most economical processing route for producing titanium parts, and unlike most metals, the properties of cast titanium are on par with those of wrought. This chapter covers titanium melting and casting practices -- including vacuum arc remelting, consumable electrode arc melting, electron beam hearth melting, rammed graphite mold casting, sand casting, investment casting, hot isostatic pressing, weld repair, and heat treatment -- along with related equipment, process challenges, and achievable properties and microstructures. It also explains how titanium parts are produced from powders and how the different methods compare with each other and with conventional production techniques. The methods covered include powder injection molding, spray forming, additive manufacturing, blended elemental processing, and rapid solidification.