Search Results for quench cooling systems

This appendix discusses the sizing, scaling, and configuration requirements of the basic components in a quench cooling system, including tanks, pumps, hoses, and inlet and outlet fixtures and the materials from which they are made.

This chapter, a detailed account of furnaces and related equipment for heat treating, begins by describing three basic modes of heat transmission, namely conduction, convection, and radiation, followed by a discussion on the working principle, applications, advantages, and disadvantages of furnaces classified based on the heat transfer medium employed. The types of furnaces covered are batch-type, continuous-type, liquid bath, fluidized bed, and vacuum. The subsequent sections provide information on furnace parts, fixtures, quenching mediums, and quenching systems. The final section of the chapter describes the types of atmospheres available, emphasizing their applications and limitations.

This chapter discusses the quenching process and its adaptation to induction heat treating. It describes the three stages of quenching, the cooling characteristics of various types of quenchants, and the details of nearly a dozen compatible quenching methods. It also explains how to verify whether a quenchant can cool a workpiece fast enough to achieve martensitic transformation without cracking or distortion.

This chapter discusses the maintenance needs of major components in induction heat-treating systems, including power supplies, heat stations, capacitors, high-frequency output stages, induction coils, water systems, quench systems, and fixturing.

This chapter discusses the various factors pertinent to gravity permanent mold (GPM) castings, along with their advantages, limitations, and significance. The discussion covers the geometric factors, process and manufacturing elements, gating practices, and feeding principles of and pouring systems in GPM. The influences of mold coatings on GPM and low pressure permanent mold castings are described. The chapter also discusses various processes involved in the engineering of core boxes and cooling of GPM for casting integrity and cycle time control. It provides information on some of the processes involved in post-casting operations, namely de-coring and de-gating. The key design aspects for consideration in water quenching during the T6 heat treatment are reviewed. The chapter also provides information on two critical cycle events important in engineering at the manufacturing facility: tipper cycle planning and table or cell cycle planning.

This chapter discusses the processes used in manufacturing to thermally alter the properties of metals and alloys. It begins with a review of the iron-carbon system, the factors that affect hardenability, and the use of continuous cooling transformation diagrams. It then explains how various steels respond to heat treatments, such as annealing, normalizing, spheroidizing, tempering, and direct and interrupted quenching, and surface-hardening processes, such as flame and induction hardening, carburizing, nitriding, and carbonitriding. It also addresses the issue of temper embrittlement and discusses the effect of precipitation hardening on aluminum and other alloys.

This chapter describes case depth and discusses flame hardening, laser heat treatment, electron beam hardening, induction heat treatment, and induction hardening.

This chapter discusses the basic components in an induction heat treating system. It describes the design and operating characteristics of power supplies, load-matching transformers, tuning capacitors, power regulators, controllers, process monitors, and diagnostic systems. It also provides information on fixtures and work-handling devices, quench systems, and load matching and tuning procedures.

This chapter discusses vacuum furnace processes and their design. The chapter focuses on the pressure levels, heating elements, pumping systems, temperature control systems, and quenching systems in vacuum furnaces. It then details specific applications of vacuum heat treating.

Titanium alloys respond well to heat treatment be it to increase strength (age hardening), reduce residual stresses, or minimize tradeoffs in ductility, machinability, and dimensional and structural stability (annealing). This chapter describes the phase transformations associated with these processes, explaining how and why they occur and how they are typically controlled. It makes extensive use of phase diagrams and cooling curves to illustrate the effects of alloying and quenching on beta-to-alpha transformations and the conditions that produce metastable phases. It also examines several time-temperature-transformation diagrams, which account for the effect of cooling rate.

The appendix provides a glossary of practical heat treating terms.

This chapter discusses quality control programs and procedures for induction heat-treating systems and includes related forms and checklists.

The decomposition of austenite, during controlled cooling or quenching, produces a wide variety of microstructures in response to such factors as steel composition, temperature of transformation, and cooling rate. This chapter provides a detailed discussion on the isothermal transformation and continuous cooling transformation diagrams that characterize the conditions that produce the various microstructures. It discusses the mechanism and process variables of quenching of steel, explaining the factors involved in the mechanism of quenching. In addition, the chapter provides information on the causes and characteristics of residual stresses, distortion, and quench cracking of steel.

This chapter presents a step-by-step approach for analyzing the causes of nonconforming workpieces and determining potential solutions. The discussion covers a wide range of issues, including testing errors, latent and process-related defects, examination and testing techniques, defect characterization, and effective remedial actions.

The practical application of metals and alloys is guided largely by information obtained through the study of their microstructure. This chapter examines a wide range of titanium microstructures, identifying characteristic features and explaining what they reveal about processing, properties, and performance. It includes images of elongated and equiaxed structures, primary alpha, transformed beta, and metastable phases as well as spheroidal and intergranular beta, alpha case, and intermetallic compounds. It also defines important terms and provides step-by-step procedures for preparing titanium for metallographic analysis.

This chapter introduces the principal heat treating processes, namely normalizing, annealing, stress relieving, surface hardening, quenching, and tempering. An overview of four of the more popular surface hardening treatments, namely carburizing, carbonitriding, nitriding, and nitrocarburizing, is provided.

This chapter discusses the processes involved in heat treating of stainless steels, providing information on the classification, chemical compositions, and corrosion resistance of stainless steels. Five groups of stainless steels are discussed: austenitic, ferritic, martensitic, precipitation-hardening, and duplex grades. The chapter also describes the heat treatment conditions that should be followed for processing of stainless steels.

This chapter covers the fundamentals of heat treating. It begins with a review of the composition, classification, and properties of iron and steel, the phases of the iron-carbon system, and the basic types of heat treatments. It then discusses the topics of hardness and hardenability, the role of carbon in the hardening of steels, the process of austenitization, and the influence of cooling rate on subsequent transformations. The chapter also explains how induction heating affects residual stress, distortion, and grain size.

This chapter explains the definition of carbon steels and lists the Unified Numbering System designations and the compositions that are universally accepted by steel producers and fabricators. Compositions of higher hardenability carbon steels (higher manganese grades and/or boron treated steels) are also discussed, as well as those of free-machining carbon steels. Detailed heat treating procedures are presented for a representative group of carbon steels. The processes involved in tempering and austempering of carbon steels are also discussed.