Search Results for purification

This chapter provides an overview of beryllium casting practices and the challenges involved. It discusses the stages of solidification, the effect of cooling rate, the difficulty of heat removal, and the potential for hot cracking. It describes common melting techniques, including vacuum induction melting, vacuum arc melting, and electron beam melting, and some of the ways they have been used to cast beryllium alloys. The chapter also includes information on metal purification and grain refinement procedures.

This chapter describes some of the processes used to concentrate beryllium-rich minerals from ores. It discusses the flotation of bertrandite and phenacite from calcite, mica, fluorspar, and quartz-containing ores, the flotation of beryl from pegmatitic gangues and low-grade deposits, and the use of chemical activators and conditioning agents. It also explains that hand sorting is still very common because of processing challenges and inefficiencies.

This chapter describes some of the chemical processes that have been developed to extract beryllium from different types of ore. It covers the Kjellgren-Sawyer sulfate method, the Degussa method, Copaux-Kawecki fluoride extraction, solvent extraction, and leaching and settling. It also provides information on electrolytic extraction and the use of electrorefining.

Beryllium, despite its relatively simple atomic structure, possesses a wide range of useful engineering properties. It has the highest strength-to-weight ratio and modulus of elasticity among structural metals and is an important alloy addition in copper, nickel, and aluminum alloys. It also has excellent thermal properties, low atomic mass, a small x-ray absorption cross section, and a large neutron scattering cross section. This brief introductory chapter provides an overview of the unique qualities of beryllium along with typical applications and uses.

This chapter describes the basic steps in the production of titanium ingots and their subsequent conversion to standards product forms. It explains how titanium ore is reduced to a spongy residue, then granularized, compacted, and melted (along with alloying additions) to form an ingot, which may be remelted several times to achieve the necessary properties. It also discusses the cause of defects and ingot imperfections and the benefits of billet reduction and grain-refinement processes.

This chapter provides an overview of the production and use of titanium and its significance as an engineering material. It begins by identifying important deposits and ores and assessing current and future production capacities and how they align with global consumption trends. It then describes the physical and mechanical properties of pure titanium and numerous grades of wrought titanium alloys and explains how they compare with other aerospace materials in terms of processing complexity and cost. The chapter also includes information on extractive metallurgy, current and emerging processes, product forms, and related costs.

The discovery and use of materials have shaped civilization since ancient times. This chapter traces the history of the use of metals from hammered copper estimated to be 11,000 years old to the development of electrolytically refined aluminum in 1884. The discussion covers the advent of the Bronze Age, extraction of metals from their respective ores, and the discovery of modern metals such as chromium, vanadium, platinum, and titanium.

This chapter discusses the corrosion behavior of titanium, the types of corrosion that can occur, and the effect of alloying on corrosion resistance. It explains that, due to its tenacious oxide film, titanium has excellent corrosion resistance in oxidizing environments and that the resistance can be extended into the “reducing-acid” region by adding a small amount of palladium. It describes how different grades of titanium respond to different forms of attack, including uniform, crevice, and galvanic corrosion. It also identifies applications where corrosion is often a concern.

This chapter discusses the synthesis of important beryllium compounds, including beryllium borides, beryllium carbide, beryllium carbonates, beryllium carboxylates, beryllium halides, beryllium hydride, beryllium hydroxide, beryllium nitrate, beryllium nitride, beryllium oxalate, beryllium oxide, beryllium oxide carboxylates, beryllium perchlorate, beryllium phosphates, beryllium sulfate, and beryllium sulfide.

Carbon and low-alloy steels in high-temperature service are vulnerable to the effects of hydrogen attack, which include severe loss in tensile and rupture strengths as well as ductility. As the chapter explains, when steel is in contact with hydrogen molecules at elevated temperatures, hydrogen atoms can be absorbed at the surface and then diffuse into the metal. Hydrogen atoms in the metal then react with iron carbide forming methane gas which can accumulate at grain boundaries and other interfaces. The chapter describes two applications, one in coal-fired boilers, the other in petroleum refining, where hydrogen attack was observed. It documents the extent of the damage in each case and identifies the source of the hydrogen.

This chapter presents examples of aluminum infrastructure applications and their benefits to society. Infrastructure applications covered within this chapter include: electrical conductors; roads and bridges; highway signs, traffic signals, and license plates; railroad and highway crossings; solar energy generation; and agriculture and industrial applications.

This chapter describes the procedures and processes used to chemically analyze beryllium samples. It discusses gravimetric, volumetric, colorimetric, and fluorometric techniques, radiochemical separation and assay, and the use of emission spectrometry and polarographic methods.

This chapter introduces the key powder fabrication attributes to assist in the identification of the right powders for an application. First, it describes the characteristics of engineering powders such as particle size distribution, powder shape and packing density, surface area, powder flow and rheology, and chemical analysis. The chapter then describes the general categories of powder fabrication methods, namely mechanical comminution, electrochemical precipitation, thermochemical reaction, and phase change and atomization. It provides information on the two largest contributors to powder price, namely raw material cost and conversion cost. The applicability of various processes to specific material systems is mentioned throughout this chapter.

This chapter discusses coating technologies that are applicable to beryllium, including physical and chemical vapor deposition, thermal evaporation, electroplating, sputtering, ion plating, and plasma arc spraying. It describes the advantages and disadvantages of each method and the effect of temperature, pressure, and other process variables on the microstructures and properties developed.

This chapter describes the physical characteristics, properties, and behaviors of solid solutions under equilibrium conditions. It begins with a review of a single-component pure metal system and its unary phase diagram. It then examines the solid solution formed by copper and nickel atoms. It discusses the difference between interstitial and substitutional solid solutions and the factors that determine the type of solution that two metals are likely to form. It also addresses the development of intermediate phases, the role of free energy, transformation kinetics, liquid-to-solid and solid-state phase transformations, and the allotropic nature of metals.

Aluminum is the second most widely used metal in the world. It is readily available, offers a wide range of properties, and can be shaped, coated, and joined using a variety of methods. This chapter discusses some of the key attributes of wrought and cast aluminum alloys and the classifications, designations, and grades of available product forms. It also explains how aluminum alloys are used in aerospace, automotive, rail, and marine applications as well as in building and construction, electrical products, manufacturing equipment, packaging, and consumer durables such as appliances and furniture.

Induction heating has found widespread use as a method to raise the temperature of a metal prior to forming or joining, or to change its metallurgical structure. However, induction heating has specialized capabilities that make it suitable for applications outside of metal treatment and fabrication. This chapter summarizes some of the special applications of induction heating, including those in the plastics, packaging, electronics, glass, chemical, and metal-finishing industries. The chapter concludes with a discussion of the application of induction heating for vacuum processes.

This chapter addresses the implications for increased aluminum usage on major issues such as climate change and solid waste management. The chapter also considers three approaches for decarbonizing aluminum-product production.

This chapter reviews the basic chemistry of beryllium metals and compounds, including beryllium hydroxide, beryllium carbonates, beryllium fluoride, and beryllium chloride. It discusses the uses as well as application challenges of various forms of beryllium and includes information on their chemical properties and reactions.