This chapter provides an overview of key elements in controlling the casting process, systems to confirm the quality of outgoing components, and the steps needed to launch a novel product. The discussion also provides information on process control tools and techniques; incoming material control; process control of sand preparation and system maintenance; metallic charge materials; product quality control; and melting, metallurgical, and mechanical testing.

A successful heat treating operation is determined by the ability to satisfy the customer's quality requirements consistently and economically. This chapter reviews the steps that are important to produce quality parts in heat treating with a brief practical explanation of each. The steps include selecting proper material and design of the part being treated; determining whether the process is capable of heat treatment; using statistical process control, control charting, and in-process inspection and testing; and applying statistical quality control and final testing (sampling) to verify the results.

Casting quality and consistency need to be carefully controlled. This chapter discusses the procedures that describe the process and product quality controls. In addition, it provides information on quality assurance programs.

The formation of defects in materials that have been fusion welded is a major concern in the design of welded assemblies. This article describes four types of defects that, in particular, have been the focus of much attention because of the magnitude of their impact on product quality. Colloquially, these four defect types are known as hot cracks, heat-affected zone microfissures, cold cracks, and lamellar tearing.

The aim of every extrusion plant is the efficient production of competitive products that meet the appropriate quality requirements. This chapter discusses the processes involved in the selection and introduction of a quality management system, along with its application, advantages, and disadvantages. It describes the process chain for order processing within the quality circle and provides information on product liability legal issues. In addition, the chapter discusses the processes involved in quality control, along with its organization, responsibilities, audits, and testing.

This chapter provides a summary of ongoing efforts to improve quality and productivity in the aluminum extrusion industry. It assesses advancements in several areas including extrusion presses and auxiliary equipment, tool and die technology, billet casting, extrusion thermodynamics and tribology, and process control.

This chapter discusses quality control programs and procedures for induction heat-treating systems and includes related forms and checklists.

This chapter provides guidelines on how to set up and run an effective quality-improvement program for aluminum extrusion operations. It begins by identifying production processes and variables that impact the quality of hard and soft alloy extrusions. It then presents a series of checklists and flowcharts that can be used to monitor and troubleshoot billet-making and extrusion processes, die construction, equipment maintenance, heat treating, and sawing and stretching procedures. It also discusses the importance of charting test results and monitoring surface treatments that may be required to improve corrosion, oxidation, or wear resistance.

This chapter first introduces the various factors that may alter the physical and mechanical properties of aluminum castings that are addressed in the other chapters in the book. Then, it presents the historical development of aluminum castings, followed by a discussion on the advantages and limitations of aluminum castings. Next, the chapter describes the major trends that are influencing the increased use of aluminum castings. Finally, it introduces the considerations involved in the selection of an appropriate aluminum alloy and casting process for a given application.

This chapter is a brief account of various factors pertinent to the development of an engineering component. The discussion covers the disciplines and interactions of design development, engineering of component design, validation of design and process analysis, and matrix of design and manufacturing elements.

Stress severity factors are used in design and analysis to account for stress concentrations, variations in material properties and fabrication quality, and other analytical uncertainties. They indicate the severity of stress in areas that are prone to crack development. This appendix discusses stress severity factors associated with fastener holes in attachment joints.

This chapter surveys both basic quality and basic reliability concepts as an introduction to the failure analysis professional. It begins with a section describing the distinction between quality and reliability and moves on to provide an overview of the concept of experiment design along with an example. The chapter then discusses the purposes of reliability engineering and introduces four basic statistical distribution functions useful in reliability engineering, namely normal, lognormal, exponential, and Weibull. It also provides information on three fundamental acceleration models used by reliability engineers: Arrhenius, Eyring, and power law models. The chapter concludes with information on failure rates and mechanisms and the two techniques for uncovering reliability issues, namely burn-in and outlier screening.

This article summarizes the results of work completed by the ASM Thermal Spray Society Advisory Committee to identify key research challenges and opportunities in the thermal spray field. It describes and prioritizes research priorities related to emerging process methods, thermal spray markets and applications, and process robustness, reliability, and economics.

This chapter provides an introduction to statistical process control and the concept of total quality management. It begins with a review of quality improvement efforts in the extrusion industry and the considerations involved in developing sampling plans and interpreting control charts. It then lays out the steps that would be followed in order to implement statistical testing for billet casting, die performance, or any other process or variable that impacts extrusion quality. The chapter concludes with an overview of the fundamentals of total quality management.

This chapter discusses the role of standards and specifications for steel castings. It defines specifications and discusses how certification, testing, examination, methods, practices, procedures, compositions, properties, facilities, statistical process control, and documentation relate to codes and standards. The chapter describes processes involved in the selection of specifications for steel castings. Further, it provides information on the cost of specifications.

This chapter provides an overview of the thermodynamics of extrusion. It begins by presenting a thermodynamic model of the extrusion process expressed in the form of finite difference equations. It then explains how the model accounts for multiple sources of heat generation, the influence of principal variables on temperature rise, and different types of temperature measurements. It also discusses the benefits of isothermal extrusion and how it achieves consistent mechanical properties in extruded components.

The machinery and equipment required for rod and tube extrusion is determined by the specific extrusion process. This chapter provides a detailed description of the design requirements and principles of machinery and equipment for direct and indirect hot extrusion. It then covers the presses and auxiliary equipment for tube extrusion, induction furnaces for billet processing, handling systems for copper and aluminum alloy products, extrusion cooling systems, and age-hardening ovens. Next, the chapter describes the principles and applications of equipment for the production of aluminum and copper billets. Then, it focuses on process control in both direct and indirect hot extrusion of aluminum alloys without lubrication. The chapter describes the technology of electrical and electronic controls in the extrusion process. It ends with a discussion on the factors that influence the productivity and quality of the products in the extrusion process and methods for process optimization.

This chapter provides an overview of the various inspection methods used with metals and alloys, namely visual inspection, coordinate measuring machines, machine vision, hardness testing, tensile testing, chemical analysis, metallography, and nondestructive testing. The nondestructive testing methods discussed are liquid penetrant inspection, magnetic particle inspection, eddy current inspection, radiographic inspection, and ultrasonic testing.