This appendix contains the metric stress or pressure readings (MPa or ksi) to be converted.

Gas-metal reactions can have a significant impact on metals and alloys, affecting their properties (during processing) and accelerating service failures, particularly in hot, corrosive environments. This chapter discusses the kinetics of gas-metal reactions and how they are driven by Gibbs energy changes. It plots the energy of formation for many important metal oxides and explains how to construct isothermal stability diagrams to analyze complex reactions involving metals, alloys, and gases containing more than one reactive component.

This chapter concentrates almost exclusively on inspection techniques related to pressure vessels and pipework. The discussion covers the general aspects associated with inspection and the key factors relevant to it. In addition, the chapter addresses processes involved in data collection and management, namely data acquisition, reporting, trending, reviewing, and auditing. Capabilities and limitations of in-service inspection techniques are discussed in the Appendix to this chapter.

This chapter discusses the operating mechanism, applications, advantages, and limitations of Brinell hardness testing, Rockwell hardness testing, Vickers hardness testing, Scleroscope hardness testing, and microhardness testing. In addition, the general precautions and selection criteria to be considered are described and details of equipment setup provided.

Examining and evaluating the nitrided case is generally accomplished by hardness testing and microscopic examination. This chapter discusses both characterization methods, as well as sample preparation. The chapter also discusses the processes involved in the etching of the sample after microhardness testing and provides practices that contribute to the safe preparation of specimens. Examples of nitrided case microstructures, using optical light microscopy, are also presented.

This chapter provides a brief overview of phase diagrams, explaining what they represent and how and why they are used. It identifies key points, lines, and features on a binary nickel-copper phase diagram and explains what they mean from a practical perspective. It also discusses the concept of equilibrium, the significance of Gibb’s phase rule, the theorem of Le Chatelier, and the use of the lever rule.

Fabricated powder metallurgy (P/M) parts are evaluated and tested at several stages during manufacturing for part acceptance and process control. The various types of tests included are dimensional evaluation, density measurements, hardness testing, mechanical testing, and nondestructive testing. This chapter is a detailed account of these testing methods. It describes the four most common types of defects in P/M parts, namely ejection cracks, density variations, microlaminations, and poor sintering. The chapter discusses the capabilities and limitations of various nondestructive evaluation methods to flaw detection in P/M parts. The nondestructive evaluation methods covered are mechanical proof testing, metallography, liquid penetrant crack detection, filtered particle crack detection, magnetic particle crack inspection, direct current resistivity testing, x-ray radiography, computed tomography, gamma-ray density determination, and ultrasonic techniques.

This chapter discusses the unique characteristics of isomorphous alloy systems. It begins with a review of the naming conventions for multi-component systems and the construction of a three-dimensional phase diagram for a two-component alloy system. It explains how phase diagrams can be constructed from time-temperature cooling curves and how they can be used to predict the phases present, their chemical compositions, and relative amounts. It also shows how phase diagrams can be modified to account for nonequilibrium cooling conditions.

This chapter discusses field, visual, physical, and metallurgical examinations of gear failures. Physical examinations reviewed include nondestructive testing, including magnetic-particle inspection, tooth characteristic studies, surface hardness testing, ultrasonic testing, nital etching, profilometer measurements, and dimensional checking. Metallurgical examinations reviewed include the cross-sectional hardness survey, macroscopic examination, carbon gradient traverse, chemical analysis, case hardness traverse [microhardness], microscopic examination, and scanning electron microscopy.

This chapter describes processes for evaluation of nitrided parts, including case depth and case hardness, and discusses the factors contributing to corrosion and distortion of parts after ferritic nitrocarburizing.

This chapter discusses the maintenance needs of major components in induction heat-treating systems, including power supplies, heat stations, capacitors, high-frequency output stages, induction coils, water systems, quench systems, and fixturing.

This article, prepared under the auspices of the ASM Thermal Spray Society Committees on Accepted Practices, describes a procedure for evaluating residual stresses in thermal spray coatings, which is an extension of the well-known layer removal method to include the Young’s modulus and Poisson’s ratio properties of the thermal spray coating material and the substrate. It presents questions and answers that were selected to introduce residual stresses in thermal spray coatings. The article describes equipment and the laboratory procedure for the modified layer removal method and provides the description of the residual stress specimen. It also describes the procedures for applying or installing bonded resistance strain gages, the dimensions of the test specimen, the procedure for removing layers, and the method for interpreting the data to evaluate residual stresses. The spreadsheet program, “ MLRM for Residual Stresses ,” is available as a supplement to this document.

This chapter discusses the basic components in an induction heat treating system. It describes the design and operating characteristics of power supplies, load-matching transformers, tuning capacitors, power regulators, controllers, process monitors, and diagnostic systems. It also provides information on fixtures and work-handling devices, quench systems, and load matching and tuning procedures.

This appendix describes the information contained in titanium alloy datasheets and defines the many abbreviations that are used.

This chapter provides a practical overview of the tools and techniques used to assess the tribological aspects of metal forming processes. It describes test methods that have been developed to evaluate bulk deformation and sheet metal forming processes along with lubricant rheology, friction forces, and stress and strain distributions. It explains how to measure temperature between tooling and workpiece surfaces as well as surface topography and composition, film thickness, and wear. It also discusses the benefits of reduced-scale and simulation testing and the transfer of results from one process to another.

Failure investigation is an integral part of any design and manufacturing operation, providing critical information to solve manufacturing problems and assist in redesigns. This chapter addresses several aspects of failure investigation, beginning with the challenges of organizing such efforts and the need to define a clear and concise goal, direction, and plan prior to the investigation. It covers the causes of failure and the training and education organizations require to understand and prevent them. The chapter emphasizes the importance of discovering the root cause of failures, and uses examples to explain the factors involved and how to recognize them when the first appear.

Hardness tests provide valuable information about the quality of materials and how they are likely to perform in different types of service. This chapter covers some of the most widely used hardness testing methods, including Vickers, Rockwell, and Brinell tests, Shore scleroscope and Equotip hardness tests, and microindentation tests. It describes the equipment and procedures used, discusses the factors that influence accuracy, and provides hardness conversion equations for different types of materials. It also explains how hardness testing sheds light on anisotropy, machinability, wear, fracture toughness, and tensile strength as well as temperature effects, residual stress, and quality control.

Critical process variables must be controlled to ensure uniform and repeatable heat-treating results. This chapter covers the subject of controlling the heat-treating process. All heat-treating equipment utilizes various sensors, timers, and other components to monitor and control the process utilizing various control methods. The chapter focuses on temperature control and measurement, including a discussion about thermocouples and devices for measuring thermal and electrical conductivity.

The low-pressure permanent molding (LPPM) and semipermanent molding (LPSPM) processes are versatile, and they meet the quality requirements of a variety of high-integrity, large-sized, and thin-walled aluminum castings for various industries. This chapter presents the major features, operation sequence, advantages, and applications of LPPM, LPSPM, and counter-pressure casting.

This chapter discusses the construction, interpretation, and use of ternary phase diagrams. It begins by examining a hypothetical phase space diagram and several corresponding two-dimensional plots. It then describes one of the most basic tools of metallurgy, the Gibbs triangle, and explains how to construct tie lines to analyze intermediate compositions and phases. It also discusses the use of three-dimensional temperature-composition diagrams, three- and four-phase equilibrium phase diagrams, and binary and ternary phase diagrams associated with the iron-chromium-nickel alloy system.