Induction heat treating is used in a wide range of applications. Typical uses, as described in this chapter, include the surface hardening of many types of shafts as well as gears and sprockets and the through-hardening of gripping teeth, cutting edges, and impact zones incorporated into various types of tools and track pins manufactured for off-highway equipment.

This appendix provides practical information on induction coils and how they are made. It discusses soldering methods, preferred materials, design challenges, and best practices and procedures. It also discusses the design, construction, and application of magnetic flux concentrators and the growing use of computer simulation.

This chapter begins with a review of some of the terms used in the gear industry to describe the design of gears and gear geometries. It then discusses the types of gears that operate on parallel shafts, intersecting shafts, and nonparallel and nonintersecting shafts. Next, the processes involved in the selection of gear are discussed, followed by information on the basic stresses applied to a gear tooth, the strength of a gear tooth, and the most widely used gear materials. Further, the chapter briefly reviews gear manufacturing methods and the heat treating processing steps including prehardening processes, through hardening, and case hardening processes.

Mechanical tests are performed to evaluate the durability of gears under load. The chapter first discusses the processes involved in the computations of stress for test parameters of gear. Next, the chapter reviews the four areas of specimen characterization of a test program, namely dimensional, surface finish texture, metallurgical, and residual stress. The following section presents the tests that simulate gear action, namely the rolling contact fatigue test, the single-tooth fatigue test, the single-tooth single-overload test, and the single-tooth impact test. Finally, the chapter describes the test procedures for surface durability (pitting), root strength (bending), and scoring (or scuffing) testing.

This chapter identifies the primary causes of service failures and discusses the types of defects from which they stem. It presents more than a dozen examples of failures attributed to such causes as design defects, material defects, and manufacturing or processing defects as well as assembly errors, abnormal operating conditions, and inadequate maintenance. It also describes the precise usage of terms such as defect, flaw, imperfection, and discontinuity.

This chapter discusses the design and operating principles of various types of electromagnetic coils. It explains how induction coils are classified based on the direction of the eddy currents they induce in the workpiece and the corresponding orientation, whether longitudinal or transverse, of the associated magnetic flux. It then discusses the factors that influence coil design and selection, including coupling efficiency, frequency, the number and spacing of turns, and the use of flux intensifiers. It also includes images and illustrations of various types of coils and coil geometries for basic as well as special purpose applications.

Besides the induction coil and workpiece, the induction generator (source of ac power) is probably the most important component of an overall induction heating system. Such equipment is typically rated in terms of its frequency and maximum output power (in kilowatts). This chapter addresses the selection of power supplies in terms of these two factors as well as the operational features of different types of sources. The six different types of power supplies for induction heating applications covered in this chapter are line-frequency supplies, frequency multipliers, motor-generators, solid-state (static) inverters, spark-gap converters, and radio-frequency power supplies. The chapter discusses the design and characteristics of each of the various types of power supplies.

This chapter provides a brief review of the scientific and technological developments leading to the widespread use of induction heat treating and its many applications in industry.

To a large extent, the induction coil and its coupling to the workpiece determine the precise heating pattern that is developed. However, it is often desirable to modify this pattern in order to produce a special heating distribution or to increase energy efficiency. At other times, the high heating rates of induction are needed for processing nonconductors. This chapter describes broad methods of accomplishing such objectives: modification of the field of magnetic induction, use of devices to prevent auxiliary equipment or certain portions of a workpiece from being heated, and techniques to apply heating to electrically nonconductive materials. These methods make use of devices such as flux concentrators, shields, and susceptors. The chapter provides a description of the materials for these devices and guidelines for their application.

This chapter summarizes the various kinds of gear wear and failure and how gear life in service is estimated and discusses the kinds of flaws in material that may lead to premature gear fatigue failure. The topics covered are alignment, gear tooth, surface durability and breakage of gear tooth, life determined by contact stress and bending stress, analysis of gear tooth failure by breakage after pitting, and metallurgical flaws that reduce the life of gears. The chapter briefly reviews some components in the design and structure of each gear and/or gear train that must be considered in conjunction with the teeth to enhance fatigue life.

This chapter discusses some of the ways that the lessons learned from failures have benefitted society, leading to improved product designs, better materials, safer industrial processes, and more robust codes and standards. It also provides several examples of how the technology and procedures associated with aviation security have been upgraded in the wake of air disasters.

The successful design and manufacture of gears are influenced largely by design requirements, material selection, and proper heat treatment. This chapter addresses the cost factors and tradeoffs involved in selecting a material, design features, and a heat treating process to optimize gear performance for a particular application.

This chapter gives a brief overview of the role of fatigue in component failures. It presents examples of fatigue failures along with statistics on the causes and costs of fatigue damage in various industries. It also includes a chapter-by-chapter summary of the content in the book, noting that the book deals primarily with fatigue at temperatures below the creep range with high-temperature fatigue being treated in a companion publication.

This chapter discusses the selection, use, and integration of methods to control process variables in induction heating, including control of workpiece and processing temperature and materials handling systems. The discussion of temperature control includes a review of proportional controllers and heat-regulating devices. Integration of control functions is illustrated with examples related to heating of steel slabs, surface hardening of steel parts, vacuum induction melting for casting operations, and process optimization for electric-demand control. Distributed control within larger manufacturing systems is discussed. The chapter also covers nondestructive techniques for process control and methods for process simulation.

Iron and steel have been the most useful materials to meet the needs of several industries for many decades. Each iron and steel alloy offers unique attributes that make them the best choice for an application. This chapter provides an overview of each ferrous alloy—gray iron, malleable iron, compacted graphite iron (CGI), ductile iron, austempered ductile iron (ADI), and carbon steel and low-alloy steel; its versatile attributes; and its individual applications. A large section of the chapter covers the impact of electric vehicles on the future of the iron and steel castings industry, including discussion on electric vehicle categories and weights; impact of center of gravity on stability and steering; lightweighting incentives; and engineering for improved suspension.

The ability to accurately assess the remaining life of components is essential to the operation of plants and equipment, particularly those in service beyond their design life. This, in turn, requires a knowledge of material failure modes and a proficiency for predicting the near and long term effects of mechanical, chemical, and thermal stressors. This chapter presents a broad overview of the types of damage to which materials are exposed at high temperatures and the approaches used to estimate remaining service life. It explains how operating conditions in power plants and oil refineries can cause material-related problems such as embrittlement, creep, thermal fatigue, hot corrosion, and oxidation. It also discusses the factors and considerations involved in determining design life, defining failure criteria, and implementing remaining-life-assessment procedures.

Ultrasonic inspection is a nondestructive method in which beams of high frequency acoustic energy are introduced into a material to detect surface and subsurface flaws, to measure the thickness of the material, and to measure the distance to a flaw. This chapter begins with an overview of ultrasonic flaw detectors, ultrasonic transducers, and search units and couplants. It then discusses the principles of operation, presentation, and interpretation of data of pulse echo and transmission methods. This is followed by sections providing information on general characteristics of ultrasonic waves and the factors influencing ultrasonic inspection. The advantages, disadvantages, and applications of ultrasonic inspection are finally compared with other methods of nondestructive inspection of metal parts.

This chapter discusses the basic components in an induction heat treating system. It describes the design and operating characteristics of power supplies, load-matching transformers, tuning capacitors, power regulators, controllers, process monitors, and diagnostic systems. It also provides information on fixtures and work-handling devices, quench systems, and load matching and tuning procedures.

This chapter provides an overview of the tools and techniques used to examine failure specimens and the wealth of information that can be obtained from fracture surfaces, cracks, wear patterns, and other such features. It discusses the use of metallography, fractography, and optical and electron microscopy. It presents a number of images recorded using these methods and explains what they reveal about the mode of fracture and the state of the component prior to failure.