This chapter reviews failure aspects of structural ferrous powder metallurgy (PM) parts, which form the bulk of the PM industry. The focus is on conventional PM technology of parts in the density range of 6 to 7.2 g/cc. The chapter briefly introduces the processing steps that are essential to understanding failure analysis of PM parts. This is followed by a section on case hardening of PM parts. The methods used for analyzing the failures are then discussed. Some case studies are given that illustrate different failures and the methods of prevention of these failures.

The porous structure of powder-metal materials, and thus the sintering method, has a significant impact not only on the properties of PM components, but also on how they respond to surface treatments and fabrication processes such as coating and joining. This chapter explains how the microstructure of PM parts achieved by different sintering methods influences the development of galvanized coatings and the mechanisms involved in sinter bonding and various welding and brazing processes. It presents and interprets the results of several studies in which PM materials, including iron, copper, stainless steel, brass, and bronze alloys, are joined by spot welding, projection welding, and solid-state welding as well as furnace and microwave brazing. It also examines the effects of ZrSiO 4 additions on the friction and wear behaviors of PM bronze brake-lining materials.

This appendix is a compilation of terms and definitions associated with the processing, microstructure, and properties of powder metal stainless steels.

Compared with other deformation processes used to produce semifinished products, the hot-working extrusion process has the advantage of applying pure compressive forces in all three force directions, enhancing workability. The available variations in the extrusion process enable a wide spectrum of materials to be extruded. This chapter focuses on the processes involved in the extrusion of semifinished products in various metals and their alloys, namely tin, lead, lead-base soft solders, tin-base soft solders, zinc, magnesium, aluminum, copper, titanium, zirconium, iron, nickel, and powder metals. It discusses their properties and applications as well as suitable equipment for extrusion. It further discusses the processes involved in the extrusion of semifinished products in exotic alloys and extrusion of semifinished products from metallic composite materials.

This chapter discusses the mechanical properties of powder metal stainless steels and the extent to which they can be controlled through appropriate alloying and processing steps. It describes how process-related factors, such as porosity, interstitial content, sintering atmosphere, and heating and cooling profiles, affect strength, ductility, and corrosion resistance. It also provides an extensive amount of property data – including tensile and yield strength, elongation, hardness, and creep and stress rupture measurements as well as fatigue curves – for various grades of powder metal stainless steel.