Semiconductor memories are superb drivers for process yield and reliability improvement because of their highly structured architecture and use of aggressive layout rules. This combination provides outstanding failure signature analysis possibilities for the entire design, manufacturing, and test process. This article discusses five key disciplines of the signature analysis process that need to be orchestrated within the organization: design for test practices, test floor data collection methodology, post-test data analysis tools, root cause theorization, and physical failure analysis strategies.

This chapter assesses the potential impact of neural networks on package-level failure analysis, the challenges presented by next-generation semiconductor packages, and the measures that can be taken to maximize FA equipment uptime and throughput. It presents examples showing how neural networks have been trained to detect and classify PCB defects, improve signal-to-noise ratios in SEM images, recognize wafer failure patterns, and predict failure modes. It explains how new packaging strategies, particularly stacking and disintegration, complicate fault isolation and evaluates the ability of various imaging methods to locate defects in die stacks. It also presents best practices for sample preparation, inspection, and navigation and offers suggestions for improving the reliability and service life of tools.

The first step in die-level failure analysis is to narrow the search to a specific circuit or transistor group. Then begins the post-isolation process which entails further localizing the defect, determining its electrical, physical, and chemical properties, and examining its microstructure in order to identify the root cause of failure. This chapter assesses the tools and techniques used for those purposes and the challenges brought on by continued transistor scaling, advanced 3D packages, and new IC architectures. The areas covered include sample preparation, nanoprobing, microscopy, FIB circuit edit, and scanning probe microscopy.

The complexity of semiconductor chips and their packages has continuously challenged the known methods to analyze them. With larger laminates and the inclusion of multiple stacked die, methods to analyze modern semiconductor products are being pushed toward their limits to support these 2.5D and 3D packages. This article focuses on these methods of fault isolation, non-destructive imaging, and destructive techniques through an iterative process for failure analysis of complex packages.

This chapter provides an overview of how the disciplines of design, material, and manufacturing contribute to engineering for functional performance. It describes the interaction of product designers and casting engineers in product development. It discusses the consequences of component failure, uncertainty in data and assumptions, and selection of the factor of safety. The chapter also presents an overview of the functional requirements for product performance and provides an overview of product design development. It also presents a partial list of the different tests that are performed on prototypes and examples of product testing. The chapter describes the requirements of a traceability system.

Circuit edit has been instrumental to the development of focused ion beam (FIB) systems. FIB tools for advanced circuit edit play a major role in the validation of design and manufacture. This chapter begins with an overview of value, role, and unique capabilities of FIB circuit edit tools for first silicon debug. The etching capabilities of circuit edit FIB tools are then discussed, providing information on chemistry assisted etching in silicon oxides and low-k dielectrics. The chapter also discusses the requirements and procedures involved in edit operation: high aspect ratio milling, endpointing, and cutting copper. It then provides an introduction to FIB metal/conductor deposition and FIB dielectric deposition. Edit design rules that can facilitate prototype production from first silicon are also provided. The chapter concludes with a discussion on future trends in circuit edit technology.

This chapter discusses some of the more advanced methods and procedures used in failure analysis, including in-service material sampling, in situ microstructure analysis, and a form of punch testing that can determine the fracture toughness of any material from a tiny specimen. The chapter also covers quantitative fractography, fracture surface topography analysis, and the use of oxide dating as well as fault tree and failure modes and effects analysis (FMEA) and computational techniques.

This chapter discusses the failure mechanisms associated with fiber-reinforced composites. It begins with a review of fiber-matrix systems and the stress-strain response of unidirectional lamina and both notched and unnotched composite laminate specimens. It then explains how cyclic loading can lead to delamination, the primary failure mode of most composites, and describes some of the methods that have been developed to improve delamination resistance, assess damage tolerance, determine residual strength, and predict failure modes.

Recent trends in electronic packaging, including the growing use of 3D designs and heterogeneous integration, are greatly adding to the complexity of isolating faults in semiconductor products. This chapter reviews the latest IC packaging and integration solutions and assesses the readiness level of fault isolation tools and techniques. It examines the capabilities, limitations, and optimization potential of x-ray tomography and magnetic field imaging, describes various approaches for optical fault isolation, and compares and contrasts pre-OFI sample preparation methods. The chapter also explains how time-domain and electro-optical terahertz pulse reflectometry are used to find shorts and opens in ICs and how challenges related to heterogenous integration may be met through design for testability (DFT) and built-in self-test (BIST) accommodations and the use of passive interposers.

This chapter discusses design and certification considerations, including materials and process selection, the building block approach to certification, design allowables, and design guidelines. It also includes information on damage tolerance and environmental sensitivity.

Diagnosing the root cause of a failure is particularly challenging if the symptom of the failure is not consistently observable. This article focuses on Laser Assisted Device Alteration/Soft Defect Localization (LADA/SDL), a global fault isolation technique, for detecting such failures. The discussion begins with a section describing the three steps in LADA/SDL analysis setup: create the test loop with the fail flag and loop trigger, select the laser dwell time, and select the shmoo bias point. An overview of LADA/SDL workflow is then presented followed by a brief section on time-resolved LADA. The closing pages of the article consider in detail SDL laser interaction physics and LADA laser interaction physics.

This chapter presents an overview of microprocessor and application specific integrated circuit (IC) testing. It begins with a description of key industry trends that will impact how ICs will be tested in the future. Next, it provides a brief description of the most common tests applied in the IC industry, where technical issues that are causing methodology changes are emphasized. These include functional testing, structural testing, scan-based delay testing, built-in self-testing, memory testing, analog circuit testing, system-on-a-chip testing, and reliability testing. Trends discussed have driven the development of novel focus areas in test and the chapter discusses several of those areas, including test data volume containment, test power containment, and novel methods of defect-based test.

Laser Voltage Probing (LVP) is a key enabling technology that has matured into a well-established and essential analytical optical technique that is crucial for observing and evaluating internal circuit activity. This article begins by providing an overview on LVP history and LVP theory, providing information on electro-optical effects and free-carrier effects. It then focuses on commercially available continuous wave LVP systems. Alternative optoelectronic imaging and probing technologies for fault isolation, namely frequency mapping and laser voltage tracing, are also discussed. The subsequent section provides information on the use of Visible Laser Probing. The article closes with some common LVP observations/considerations and limitations and future work concerning LVP.

This article introduces the wafer-level fault localization failure analysis (FA) process flow for an accelerated yield ramp-up of integrated circuits. It discusses the primary design considerations of a fault localization system with an emphasis on complex tester-based applications. The article presents examples that demonstrate the benefits of the enhanced wafer-level FA process. It also introduces the setup of the wafer-level fault localization system. The application of the wafer-level FA process on a 22 nm technology device failing memory test is studied and some common design limitations and their implications are discussed. The article presents a case study and finally introduces a different value-add application flow capitalizing on the wafer-level fault localization system.

This chapter is a detailed account of various attributes related to mixing and testing of powder-binder feedstocks. Mixing parameters and their effects on feedstock properties is discussed. The attributes reviewed include mixture homogeneity, wetting, powder-binder ratio, feedstock density, elastic modulus, rheological behavior, particle size, formulation control, feedstock mixing, and feedstock properties. The chapter also provides information on the processes involved in feedstock preparation and testing.

This chapter describes some common pitfalls encountered in failure investigations and provides guidance to help engineers recognize processes and “quick fixes” that companies often try to substitute for failure analysis. It discusses three important skills and characteristics that a professional engineer must improve to conduct an effective and successful failure investigation, namely technical skills, communication skills, and technical integrity. The chapter also provides information on the additional basic tools available for failure investigation and root cause determination: the Kepner-Tregoe structured problem-solving method, PROACT software for root cause analysis developed by the Reliability Center, Inc., and other processes and methods developed by the Failsafe Network, Inc., and Shainin LLC.

The need for precise targeted interactive surgery on boards or modules is the main driver of backside preparation technology. This article assists the analyst in making decisions on backside thinning and polishing requirements. Thinning of the substrates can be accomplished by flat lapping, laser assisted chemical etch, plasma reactive ion etch, and CNC based milling and polishing. The article discusses the general characteristics, key principles, advantages, and disadvantages of these processes. It also contains case studies that illustrate the application of these processes to ceramic cavity devices, injection molded parts, and ball grid arrays.

This chapter discusses the role of failure analysis in cases involving product liability, property damage, and personal injury litigation. It also explains how material science and technology shed light on criminal activities such as smuggling, counterfeiting, theft, and the willful destruction of property.

This chapter assesses the capabilities and limitations of electric fault isolation (EFI) technology, the measurement challenges associated with new device architectures, and the pathways for improvement in emission microscopy, laser stimulation, and optical probing. It also assesses the factors that influence signal strength, spatial and timing resolution, and alignment accuracy between signal response images and the physical layout of the IC.