The complexity of semiconductor chips and their packages has continuously challenged the known methods to analyze them. With larger laminates and the inclusion of multiple stacked die, methods to analyze modern semiconductor products are being pushed toward their limits to support these 2.5D and 3D packages. This article focuses on these methods of fault isolation, non-destructive imaging, and destructive techniques through an iterative process for failure analysis of complex packages.

The chapter covers various aspects of biotribology in the context of dental care, orthopedic implants, haptics, eyewear, and stents and fixation devices. It also addresses the issue of biocompatibility and the effects of friction and contact pressure on skin.

This chapter reviews the types of friction that are of concern in tribological systems along with their associated causes and effects. It discusses some of the early discoveries that led to the development of friction laws and the understanding that friction is a system effect that can be analyzed based on energy dissipation. It describes the stick-slip behavior observed in wiper blades, the concept of asperities, and the significance of the shape, lay, roughness, and waviness of surfaces in sliding contact. It explains how friction forces are measured and how they are influenced by speed, load, and operating environment. It also covers rolling contact and fluid friction and the effect of lubrication.

This chapter discusses the processes and procedures involved in tribotesting, the significance of test parameters and conditions, and practical considerations including test metrics and measurements and the interpretation of wear damage. It also describes the different types of erosion tests in use and common approaches for adhesive wear and abrasion testing.

This chapter covers coatings and treatments that are used to improve the friction and wear behaviors of materials. It describes modifications that work by hardening contacting surfaces, including heat treating, vacuum coating, thermal spray, and plating, and those that separate or lubricate surfaces, including solid film, chemical conversion, and vacuum coatings, surface oiling and texturing, and lubricating platings. It compares and contrasts methods based on thickness and depth and their relative effect on friction, erosion, and wear.