This chapter discusses the characteristics, advantages, and disadvantages of nondestructive hardness testing methods for metals, including electromagnetic impulse testing, photothermal testing, scratch hardness testing, and ultrasonic contact impedance testing. It also discusses the use of ultrasound to determine the depth of hardening in a metal or alloy. The chapter reviews methods used to check and calibrate hardness testing machines and indenters and the use of hardness reference blocks for verification and calibration of test machines. It also addresses conversion of hardness values determined by one method to equivalent values for a different method.

This chapter provides an overview of the various inspection methods used with metals and alloys, namely visual inspection, coordinate measuring machines, machine vision, hardness testing, tensile testing, chemical analysis, metallography, and nondestructive testing. The nondestructive testing methods discussed are liquid penetrant inspection, magnetic particle inspection, eddy current inspection, radiographic inspection, and ultrasonic testing.

Fabricated powder metallurgy (P/M) parts are evaluated and tested at several stages during manufacturing for part acceptance and process control. The various types of tests included are dimensional evaluation, density measurements, hardness testing, mechanical testing, and nondestructive testing. This chapter is a detailed account of these testing methods. It describes the four most common types of defects in P/M parts, namely ejection cracks, density variations, microlaminations, and poor sintering. The chapter discusses the capabilities and limitations of various nondestructive evaluation methods to flaw detection in P/M parts. The nondestructive evaluation methods covered are mechanical proof testing, metallography, liquid penetrant crack detection, filtered particle crack detection, magnetic particle crack inspection, direct current resistivity testing, x-ray radiography, computed tomography, gamma-ray density determination, and ultrasonic techniques.

This chapter provides a comprehensive overview over all phenomena related to Voltage Contrast (VC) mechanisms in SEM and FIB. The multiple advantages, possibilities, and limits of active and passive VC failure localization are systemized and discussed. The knowledge of all facts influencing the VC generation (capacitance, leakage, doping, and circuitry) is very helpful for successful failure localization.

This chapter discusses the methods and procedures used for inspecting induction-hardened parts. It provides information on hardness and case depth measurements, nondestructive testing and surface analysis, the effect of various hardening errors, and relevant test standards.

This chapter explains how metallography and hardness testing are used to evaluate the quality and condition of metal products. It also discusses the use of tensile testing, fracture toughness and impact testing, fatigue testing, and nondestructive test methods including ultrasonic, x-ray, and eddy current testing.

This chapter addresses in-service monitoring and corrosion testing of weldments. Three categories of corrosion monitoring are discussed: direct testing of coupons, electrochemical techniques, and nondestructive testing techniques. The majority of the test methods for evaluating corrosion of weldments are used to assess intergranular corrosion of stainless steels and high-nickel alloys. Other applicable tests evaluate pitting and crevice corrosion, stress-corrosion cracking, and microbiologically influenced corrosion. Each of these test methods is reviewed in this chapter.

This chapter provides an overview of the possible mechanisms of failure for heat treated steel components and discusses the techniques for examining fractures, ductile and brittle failures, intergranular failure mechanisms, and fatigue. It begins with a description of the general sources of component failure. This is followed by a section on the stages of a failure analysis, which can proceed one after the other or occur at the same time. These stages of analysis are collection of background data, preliminary visual examination, nondestructive testing, selection and preservation of specimens, mechanical testing, macroexamination, microexamination, metallographic examination, determination of the fracture mechanism, chemical analysis, exemplar testing, and analysis and writing the report. The chapter ends with a discussion on various processes involved in the determination of the fracture mechanism.

This chapter presents various case histories that illustrate a variety of failure mechanisms experienced by the high-strength steel components in aerospace applications. The components covered are catapult holdback bar, AISI 420 stainless steel roll pin, main landing gear (MLG) lever, inboard flap hinge bolt, nose landing gear piston axle, multiple-leg aircraft-handling sling, aircraft hoist sling, internal spur gear, and MLG axle. In addition, the chapter provides information on full-scale fatigue testing, nondestructive testing, and failure analysis of fin attach bolts.

This chapter discusses field, visual, physical, and metallurgical examinations of gear failures. Physical examinations reviewed include nondestructive testing, including magnetic-particle inspection, tooth characteristic studies, surface hardness testing, ultrasonic testing, nital etching, profilometer measurements, and dimensional checking. Metallurgical examinations reviewed include the cross-sectional hardness survey, macroscopic examination, carbon gradient traverse, chemical analysis, case hardness traverse [microhardness], microscopic examination, and scanning electron microscopy.

After the fault-tree, a failure-cause identification method has identified potential failure causes and the failure analysis team has prepared a failure mode assessment and assignment (FMA&A). The team knows specifically what to search for when examining components and subassemblies from the failed system. There are numerous techniques and technologies available for examining and analyzing components and subassemblies, which are categorized as follows: optical approaches, dimensional inspection and related approaches, nondestructive test approaches, mechanical and environmental approaches, and chemical and composition analysis for assessing material characteristics. This chapter is a detailed account of the working principle and the steps involved in these techniques and technologies.

This appendix focuses on procedures, techniques, and precautions associated with the investigation and analysis of metallurgical failures that occur in service. It describes the steps of an orderly failure analysis from collecting and examining samples to performing mechanical and nondestructive tests, preparing and examining fractographs and micrographs, determining failure mode, writing the report, and developing follow-up recommendations. It also examines the fundamental mechanisms of failure, why they occur, and how to identify them by their characteristic features.

This chapter covers the steps and tests that are important to produce quality parts in heat treating. The quality tests discussed include hardness tests, such as Brinell, Rockwell, and microhardness tests. The chapter also examines tensile testing, toughness testing, optical metallography, and nondestructive testing. The chapter concludes by discussing in-process inspections and the final inspection.

This appendix presents the United States, German and European soldering and brazing standard specifications.

This chapter discusses the critical soldering faults that lead to quality degradation and potential failure of a soldered connection. It then describes the types of nondestructive evaluations used to inspect soldered and brazed joints, including dimensional and visual inspection, ultrasonic testing, radiographic examination, dye penetrant inspection, and leak testing, including overpressure tests. The chapter also provides an overview of destructive physical analysis.

This chapter discusses the use of nondestructive inspection methods, including visual, ultrasonic, radiographic, and thermographic techniques, and the types of flaws and damages they can reveal in composite parts and assemblies. It describes the basic principles behind each method along with best practices and procedures.