This chapter focuses on the effects of microscopic organisms and the by-products they produce on the electrochemical corrosion of metals. It begins by considering the characteristics of organisms that allow them to interact with the corrosion processes, the mechanisms by which organisms can influence the occurrence or rate of corrosion, and the types of corrosion most often influenced by microbes. The chapter then discusses the formation of biofilms on the surface of metals. This is followed by a list of industries most often reported as being affected by microbiological corrosion, along with the organisms usually implicated in the attack. The types of attack that have most commonly been documented are illustrated through generalized case histories for different classes of alloys. The chapter also describes the general approaches to be taken to prevent microbiologically influenced corrosion. It ends with some information on the inhibition of corrosion by the action of bacteria.

This chapter provides an introduction to various forms of corrosion, namely uniform corrosion, localized corrosion, mechanically assisted degradation, environmentally induced cracking, microbiologically influenced corrosion, and metallurgically influenced corrosion.

This chapter outlines the major types of corrosion, their interactions, their complicating effects on fracture and wear, and some possible prevention methods. The types of corrosion considered in the chapter are galvanic corrosion, uniform corrosion, pitting corrosion, crevice corrosion, microbiologically influenced corrosion, stress-corrosion cracking, and corrosion fatigue.

This chapter addresses in-service monitoring and corrosion testing of weldments. Three categories of corrosion monitoring are discussed: direct testing of coupons, electrochemical techniques, and nondestructive testing techniques. The majority of the test methods for evaluating corrosion of weldments are used to assess intergranular corrosion of stainless steels and high-nickel alloys. Other applicable tests evaluate pitting and crevice corrosion, stress-corrosion cracking, and microbiologically influenced corrosion. Each of these test methods is reviewed in this chapter.

Austenitic stainless steels exhibit a single-phase, face-centered cubic structure that is maintained over a wide range of temperatures. This chapter provides a basic understanding of grade designations, properties, and welding considerations of austenitic stainless steels. It also discusses general types of corrosive attack and their effects on service integrity as well as detection and control measures. The five corrosive attack mechanisms covered are intergranular corrosion, preferential attack associated with weld metal precipitates, pitting and crevice corrosion, stress-corrosion cracking, and microbiologically influenced corrosion.

This chapter discusses the most common causes and contributing factors for external corrosion and stress-corrosion cracking on oil and natural gas pipelines, as well as describes procedures for prevention, mitigation, detection, assessment, and repair. The forms of external corrosion covered include differential cell corrosion, microbiologically influenced corrosion, and stray current corrosion.

This article describes some of the general characteristics associated with the corrosion of weldments. The role of macrocompositional and microcompositional variations, a feature common to weldments, is emphasized in this article to bring out differences that need to be realized in comparing corrosion of weldments to that of wrought materials. The article discusses the most important methods available to minimize corrosion in weldments.

Corrosion failures of welds can occur even when the proper base metal and filler metal have been selected, industry codes and standards have been followed, and welds have been deposited that possess full weld penetration and have proper shape and contour. This chapter describes some of the general characteristics associated with the corrosion of weldments. The role of macro- and microcompositional variations, a feature common to weldments, is emphasized in this chapter to bring out differences that need to be realized in comparing the corrosion of weldments to that of wrought materials. The discussion covers the factors influencing corrosion of weldments, microstructural features of weld microstructures, various forms of weld corrosion, and welding practice to minimize corrosion.

This chapter provides a detailed account of corrosion inhibitors for oil and gas production. It begins by discussing some of the demands of competitive industry on inhibitor formulations. It then describes the varying characteristics of oil wells, gas wells, water injection systems, and pipelines. The following sections provide information on the factors influencing corrosivity of produced fluids and the methods of inhibitor application. The chapter discusses the primary causes of corrosion problems and inhibition in waterfloods and provides an overview of bacteria-induced corrosion. Various laboratory testing methods of corrosion inhibitors and the methods used to monitor corrosion rates and inhibitor effectiveness are also presented. The chapter ends by providing information on quality control of inhibitors and computerization of inhibitor treating programs.

This chapter explores the behavior of stainless steel in media that promote corrosion. The forms of corrosion covered are uniform corrosion, atmospheric corrosion, localized corrosion, pitting corrosion, crevice corrosion, and grain boundary corrosion. The chapter discusses the influence of material and environmental variables on stress-corrosion cracking (SCC) and the mechanisms proposed for SCC in stainless steel, comparing the mechanism of SCC with hydrogen embrittlement. In addition, it provides information on biocorrosion and microbiologically induced corrosion in ambient aqueous environments.

This chapter discusses some important factors involved in the atmospheric corrosion of engineering materials. The discussion begins with a description of elements necessary for the operation of a galvanic corrosion cell and corrosion reactions, followed by the types of atmospheric corrosion attack. Some of the atmospheric parameters and their effects on the corrosion of several metals are then reviewed. The following sections provide information on air chemistry, principal pollutants inducing corrosion, thermodynamics as well as models for prediction of atmospheric corrosion, and use of Pourbaix diagrams. The phenomenon of precipitation runoff on the corroded metal surface is then discussed. The chapter also describes the role of microbes or bacteria in the corrosion of metals. It concludes by providing information on the trends in atmospheric corrosion research and methods.

Aluminum products are used extensively in natural atmospheres and in and around water. They are also widely used in building materials and as containers for chemicals and food and beverage products. This chapter discusses the corrosion mechanisms associated with these environments and the influence of various factors and prevention methods. It also includes an extensive amount of data of corrosion rates, corrosion resistance, and changes in mechanical properties.

Corrosive environments can be broadly classified as atmospheric, underground/soil, water, acidic, alkaline, and combinations of these. Complicating matters is the fact that there are important variables, for example, pH, temperature, and the presence of biological organisms, that can significantly alter the response of the material in a given environment. This chapter provides a detailed account of all these types of corrosion affecting various industries, pointing out the connection between the characteristics of the corrosive environment that control corrosion behavior, the corrosion characteristics of various metals and materials systems, and the subsequent corrosion response.

This chapter focuses on various factors to be considered at design stage to minimize corrosion. It begins by providing information on design considerations and general corrosion awareness. This is followed by a description of several factors influencing materials-component failure. Details on design and materials selection, which assist in controlling corrosion, are then provided. The chapter ends with a discussion on the design factors that influence corrosion.

This chapter is a detailed study of the localized corrosion behavior of steel, copper, and aluminum alloys. It applies the basic principles of electrochemistry, as well as materials science and solid and fluid mechanics, to explain the causes and effects of pitting, crevice corrosion, stress corrosion cracking, and corrosion fatigue. It describes the underlying mechanisms associated with each process and how they relate to the microstructure of the metal or alloy, the physical condition of the surface, and other factors such as the coupling of the metal to a dissimilar metal or surface film.

This chapter discusses various factors that affect corrosion of stainless steel weldments. It begins by providing an overview of the metallurgical factors associated with welding. This is followed by a discussion on preferential attack associated with weld metal precipitates in austenitic stainless steels as well as several forms of corrosion associated with welding. The effects of gas-tungsten arc weld shielding gas composition and heat-tint oxides on corrosion resistance are then covered. Microbiological corrosion of butt welds in water tanks is also illustrated. In addition, the chapter provides information on corrosion of ferritic and duplex stainless steel weldments.

This chapter describes various units and process streams that are often susceptible corrosion inhibitors in crude oil refineries, discusses the types and applications of corrosion inhibitors, and provides some information on corrosion monitoring techniques used at refineries.