Besides the induction coil and workpiece, the induction generator (source of ac power) is probably the most important component of an overall induction heating system. Such equipment is typically rated in terms of its frequency and maximum output power (in kilowatts). This chapter addresses the selection of power supplies in terms of these two factors as well as the operational features of different types of sources. The six different types of power supplies for induction heating applications covered in this chapter are line-frequency supplies, frequency multipliers, motor-generators, solid-state (static) inverters, spark-gap converters, and radio-frequency power supplies. The chapter discusses the design and characteristics of each of the various types of power supplies.

This chapter discusses the design and operating principles of various types of electromagnetic coils. It explains how induction coils are classified based on the direction of the eddy currents they induce in the workpiece and the corresponding orientation, whether longitudinal or transverse, of the associated magnetic flux. It then discusses the factors that influence coil design and selection, including coupling efficiency, frequency, the number and spacing of turns, and the use of flux intensifiers. It also includes images and illustrations of various types of coils and coil geometries for basic as well as special purpose applications.

This chapter discusses the processes involved in heat treating of stainless steels, providing information on the classification, chemical compositions, and corrosion resistance of stainless steels. Five groups of stainless steels are discussed: austenitic, ferritic, martensitic, precipitation-hardening, and duplex grades. The chapter also describes the heat treatment conditions that should be followed for processing of stainless steels.

This chapter focuses on the inspection of steel bars for the detection and evaluation of flaws. The principles involved also apply, for the most part, to the inspection of steel wire. The nondestructive inspection methods discussed include magnetic particle inspection, liquid penetrant inspection, ultrasonic inspection, and electromagnetic inspection. Eddy current and magnetic permeability are also covered.

This chapter discusses the basic components in an induction heat treating system. It describes the design and operating characteristics of power supplies, load-matching transformers, tuning capacitors, power regulators, controllers, process monitors, and diagnostic systems. It also provides information on fixtures and work-handling devices, quench systems, and load matching and tuning procedures.

Coil design for induction heating has been developed and refined over time based on the theoretical principles applied in practice to several simple inductor geometries such as the classical solenoidal coil. This chapter reviews the fundamental considerations in the design of inductors and describes some of the most widely used coils and common design modifications. Specialty coil designs for specific applications are also discussed. The chapter concludes with sections devoted to coil fabrication and design of power-supply leads.

Liquid penetrant, magnetic particle, and eddy current inspection are used to detect surface flaws. This chapter is a detailed account of the physical principles, process description, equipment requirements, selection criteria, advantages, limitations, and applications of these surface flaw detection techniques.

This chapter discusses the types of sensors used in sheet forming operations and the information they provide. It explains how force sensors protect equipment from overloads due to tool wear, friction, and misfeeds, how displacement and proximity sensors help to prevent die crashes, how acoustic emission, ultrasonic, and eddy current sensors detect tool breakage and part defects such as cracks, and how roller ball and optical sensors measure material flow. It also discusses the role of draw-in, wrinkle, oil-monitoring, and vision sensors and explains how material properties can be derived in real time from various sensor outputs.

This chapter provides an overview of the various inspection methods used with metals and alloys, namely visual inspection, coordinate measuring machines, machine vision, hardness testing, tensile testing, chemical analysis, metallography, and nondestructive testing. The nondestructive testing methods discussed are liquid penetrant inspection, magnetic particle inspection, eddy current inspection, radiographic inspection, and ultrasonic testing.

This chapter provides a brief review of the scientific and technological developments leading to the widespread use of induction heat treating and its many applications in industry.

This chapter discusses the fusion welding processes, namely oxyfuel gas welding, oxyacetylene braze welding, stud welding (stud arc welding and capacitor discharge stud welding), high-frequency welding, electron beam welding, laser beam welding, hybrid laser arc welding, and thermit welding.

Ultrasonic inspection is a nondestructive method in which beams of high frequency acoustic energy are introduced into a material to detect surface and subsurface flaws, to measure the thickness of the material, and to measure the distance to a flaw. This chapter begins with an overview of ultrasonic flaw detectors, ultrasonic transducers, and search units and couplants. It then discusses the principles of operation, presentation, and interpretation of data of pulse echo and transmission methods. This is followed by sections providing information on general characteristics of ultrasonic waves and the factors influencing ultrasonic inspection. The advantages, disadvantages, and applications of ultrasonic inspection are finally compared with other methods of nondestructive inspection of metal parts.

To a large extent, the induction coil and its coupling to the workpiece determine the precise heating pattern that is developed. However, it is often desirable to modify this pattern in order to produce a special heating distribution or to increase energy efficiency. At other times, the high heating rates of induction are needed for processing nonconductors. This chapter describes broad methods of accomplishing such objectives: modification of the field of magnetic induction, use of devices to prevent auxiliary equipment or certain portions of a workpiece from being heated, and techniques to apply heating to electrically nonconductive materials. These methods make use of devices such as flux concentrators, shields, and susceptors. The chapter provides a description of the materials for these devices and guidelines for their application.

The detailed heating requirements for specific applications must be considered before construction and implementation of any induction heating process. These requirements may include considerations such as type of heating, throughput and heating time, workpiece material, peak temperature, and so forth. The major applications of induction technology include through heating, surface heating (for surface heat treatment), metal melting, welding, brazing, and soldering. This chapter summarizes the selection of equipment and related design considerations for these applications.

This appendix provides practical information on induction coils and how they are made. It discusses soldering methods, preferred materials, design challenges, and best practices and procedures. It also discusses the design, construction, and application of magnetic flux concentrators and the growing use of computer simulation.

Induction and flame hardening are methods of hardening the surfaces of components, usually in selected areas, by the short-time application of high-intensity heating followed by quenching. These processes are used when gear teeth require high hardness, but size or configuration does not lend itself to carburizing and quenching the entire part. This chapter focuses on the processes involved in the induction and flame hardening, covering the applicable materials, hardening patterns, preheat treatment, quenching, tempering, surface hardness, case depth, hardening problems, dual-frequency process, and applications.

This chapter discusses the methods and procedures used for inspecting induction-hardened parts. It provides information on hardness and case depth measurements, nondestructive testing and surface analysis, the effect of various hardening errors, and relevant test standards.

This article discusses electrical testing and recommended procedures for determining the electrical properties of insulating materials, with particular emphasis on plastics. It describes the electrical characteristics of various forms of plastics and also presents definitions of the terms used in connection with testing and specifying plastics for electrical applications.

This chapter discusses the selection, use, and integration of methods to control process variables in induction heating, including control of workpiece and processing temperature and materials handling systems. The discussion of temperature control includes a review of proportional controllers and heat-regulating devices. Integration of control functions is illustrated with examples related to heating of steel slabs, surface hardening of steel parts, vacuum induction melting for casting operations, and process optimization for electric-demand control. Distributed control within larger manufacturing systems is discussed. The chapter also covers nondestructive techniques for process control and methods for process simulation.

Induction heating has found widespread use as a method to raise the temperature of a metal prior to forming or joining, or to change its metallurgical structure. However, induction heating has specialized capabilities that make it suitable for applications outside of metal treatment and fabrication. This chapter summarizes some of the special applications of induction heating, including those in the plastics, packaging, electronics, glass, chemical, and metal-finishing industries. The chapter concludes with a discussion of the application of induction heating for vacuum processes.