This chapter explains various aspects of the foundry process that the design engineer should consider when designing steel castings. It discusses special feeding aids, such as tapers, padding, ribs, and chills that may be used by foundry personnel to promote directional solidification. The chapter addresses the design of castings to reduce the occurrence of internal shrinkage. It provides a detailed discussion on design considerations for molding, cleaning, machining, and function.

This chapter discusses some of the ways that the lessons learned from failures have benefitted society, leading to improved product designs, better materials, safer industrial processes, and more robust codes and standards. It also provides several examples of how the technology and procedures associated with aviation security have been upgraded in the wake of air disasters.

This chapter begins with a description of the requirements of tooling and tooling material for hot extrusion. It covers the processes of designing tool and die sets for direct and indirect extrusion. Next, the chapter provides information on extrusion tooling and die sets for direct external and internal shape production and tools for copper alloy extrusion. Further, it addresses design, calculation, and dimensioning of single-piece and two-part containers and describes induction heating for containers. Information on static- and elastic-based analysis and dimensioning of containers loaded in three dimensions is provided. Examples of calculations for different containers, along with their stresses and dimensions, are presented and the manufacture, operation, and maintenance of containers are described. The chapter further discusses the properties and applications of hot working materials for the manufacture of extrusion tooling and of different extruded materials for the manufacture of extrusion tooling for direct and indirect forming.

This chapter is a detailed account of various factors pertinent to the development and launch of a product. It begins by describing the five phases in the product launch process, namely product design and development, process design and development, product and process validation, product launch, and continuous improvement. This is followed by sections covering product-process flow diagrams and also the process elements considered for process failure mode and effects analysis. Some of the aspects covered by the engineering specifications to meet the product performance requirements are then reviewed. Details on product validation requirements and definitions of parameters related to the launch process are also provided. The chapter discusses the purpose of manufacturing control plan, along with an illustration of a manufacturing control plan outlined for a safety-critical suspension casting. It ends with an overview of the contents of a program launch manual.

Parts of machines and equipment that have previously been designed as wrought or fabricated parts, or as cast parts of metals other than steel, are often reconsidered as steel castings. This chapter presents bending test data for several junction designs of L and box sections and discusses redesign from fabrication, forgings, and cast iron. The chapter also includes the benefits of redesign.

This chapter discusses the various factors pertinent to gravity permanent mold (GPM) castings, along with their advantages, limitations, and significance. The discussion covers the geometric factors, process and manufacturing elements, gating practices, and feeding principles of and pouring systems in GPM. The influences of mold coatings on GPM and low pressure permanent mold castings are described. The chapter also discusses various processes involved in the engineering of core boxes and cooling of GPM for casting integrity and cycle time control. It provides information on some of the processes involved in post-casting operations, namely de-coring and de-gating. The key design aspects for consideration in water quenching during the T6 heat treatment are reviewed. The chapter also provides information on two critical cycle events important in engineering at the manufacturing facility: tipper cycle planning and table or cell cycle planning.

This chapter is a brief account of various factors pertinent to the development of an engineering component. The discussion covers the disciplines and interactions of design development, engineering of component design, validation of design and process analysis, and matrix of design and manufacturing elements.

This chapter identifies the primary causes of service failures and discusses the types of defects from which they stem. It presents more than a dozen examples of failures attributed to such causes as design defects, material defects, and manufacturing or processing defects as well as assembly errors, abnormal operating conditions, and inadequate maintenance. It also describes the precise usage of terms such as defect, flaw, imperfection, and discontinuity.

This chapter surveys both basic quality and basic reliability concepts as an introduction to the failure analysis professional. It begins with a section describing the distinction between quality and reliability and moves on to provide an overview of the concept of experiment design along with an example. The chapter then discusses the purposes of reliability engineering and introduces four basic statistical distribution functions useful in reliability engineering, namely normal, lognormal, exponential, and Weibull. It also provides information on three fundamental acceleration models used by reliability engineers: Arrhenius, Eyring, and power law models. The chapter concludes with information on failure rates and mechanisms and the two techniques for uncovering reliability issues, namely burn-in and outlier screening.

This chapter addresses some of the challenges involved in materials selection, providing context for much of the information presented in the book. It describes a typical four-step design scenario, noting material-related considerations and information needs. It explains how design decisions are complicated by the interconnected nature of material properties, design geometry, and manufacturing requirements and effects. The chapter also assesses the design impact of several materials and discusses codes, standards, and specifications.

Corrective action means the implementation or modification of things designed to eliminate or reduce failure causes. This chapter addresses developing potential solutions and selecting the best solution. It discusses the special operations that should be used only as temporary or interim corrective actions to overcome design, process, and other failure causes. The chapter concludes by describing the process of corrective action implementation.

This chapter provides a brief introduction to manufacturing processes used to produce metal parts and how they differ in terms of achievable geometries, tolerances, surface finishes, and production rate.

This article describes key processing methods and related design, manufacturing, and application considerations for plastic parts and includes a discussion on materials and process selection methodology for plastics. The discussion covers the primary plastic processing methods and how each process influences part design and the properties of the plastic part. It also includes a brief description of functional requirements in process selection; an overview of various process effects and how they affect the functions and properties of the part; and the selection of processes for size, shape, and design detail factors.

The successful design and manufacture of gears are influenced largely by design requirements, material selection, and proper heat treatment. This chapter addresses the cost factors and tradeoffs involved in selecting a material, design features, and a heat treating process to optimize gear performance for a particular application.

This chapter provides an overview of how the disciplines of design, material, and manufacturing contribute to engineering for functional performance. It describes the interaction of product designers and casting engineers in product development. It discusses the consequences of component failure, uncertainty in data and assumptions, and selection of the factor of safety. The chapter also presents an overview of the functional requirements for product performance and provides an overview of product design development. It also presents a partial list of the different tests that are performed on prototypes and examples of product testing. The chapter describes the requirements of a traceability system.