Search Results for machining data

This appendix provides an extensive amount of data corresponding to titanium machining processes, including sawing, turning, drilling, reaming, tapping, broaching, face milling, end milling, slotting, surface grinding, and thermal cutting.

This chapter focuses on the metallurgical factors governing the machinability of stainless steels. It begins by describing the chemistry, cleanliness, structure, processing history, and the cross-section size of the stock of the different grades of stainless steel. This is followed by a general description of the machining behavior of the stainless steel families, namely ferritic, martensitic, austenitic, precipitation hardening, duplex, and super stainless steels. The beneficial effect of controlled inclusions is then discussed. The chapter ends with a section providing information on high-speed tool steel and carbide tooling, along with tool coatings and coolants applicable to stainless steel.

Forging machines vary based on factors such as the rate at which energy is applied to the workpiece and the means by which it is controlled. Each type has distinct advantages and disadvantages, depending on lot size, workpiece complexity, dimensional tolerances, and the alloy being forged. This chapter covers the most common types of forging machines, explaining how they align with basic forging processes and corresponding force, energy, throughput, and accuracy requirements.

The testing of plastics includes a wide variety of chemical, thermal, and mechanical tests. This chapter reviews the tensile testing of plastics, which has been standardized in ASTM D 638, "Standard Test Method for Tensile Properties of Plastics," and other comparable standards. It describes the fundamental factors that affect data from tensile tests, examines the stipulations in standardized tensile testing, and discusses the utilization of data from tensile tests.

The coordinate measuring machine (CMM) is used for three-dimensional inspection of both in-process and finished parts. This chapter provides a detailed account of the operating principles, measurement techniques, capabilities, and applications of CMMs. The types of CMMs are described. Vertical CMMs include cantilever-type, bridge-type, and gantry CMMs; horizontal CMMs, such as the horizontal-arm type, are also covered. The CMM application for geometric measurement, contour measurement, and specialized surface measurement are discussed.

Machine vision is a means of simulating the image recognition and analysis capabilities of the human eye/brain system with electronic and electromechanical techniques. This chapter discusses four basic steps in the machine vision process, namely image formation, image preprocessing, image analysis, and image interpretation. Details of the processes involved, equipment used, and the factors to be considered are also presented. In addition, the applications of machine vision are discussed.

This chapter is a detailed account of the tensile testing procedure used for evaluating metals and alloys. The discussion covers the stress-strain behavior of metals determined by tensile testing, properties determined from testing, test machines for measuring mechanical properties, and general procedures of tensile testing. Three distinct aspects of standard test methods for tension testing of metallic materials are discussed: test piece preparation, geometry, and material condition; test setup and equipment; and test procedure.

Tensile tests are performed for several reasons related to materials development, comparison, selection, and quality control. The properties derived from tensile tests are used in selecting materials for engineering applications. Tensile properties often are used to predict or estimate the behavior of a material under forms of loading other than uniaxial tension. This chapter provides a brief overview of tensile specimens and test machines, stress-strain curves, true stress and strain, and test methodology and data analysis.

This chapter discusses the ways in which the evolution of filament winding software systems has capitalized on the inherent flexibility of computer numerical controlled winding machines and enhanced their productivity. It provides a detailed discussion on different types of geometries that can be wound, from the simple to the highly complex, with insight into the limitations, advantages, and challenges of each. Components covered include classic axisymmetric parts (rings, pipes, driveshafts, pipe reducers, tapered shafts, closed-end pressure vessels, and storage tanks), nonround sections (aeromasts, airfoils, box sections, and fuselage sections), curved-axis parts (elbows, ducts), and special applications (tees). Basic winding concepts, such as band pattern, are discussed and explained, and some simple predictive formulae are introduced. The chapter also provides examples of programming various geometries using advanced software tools and discusses how various materials, such as rovings, tow-preg, prepreg tape, and woven materials, affect winding program generation.

This chapter reviews the current technology and examines force application systems, force measurement, strain measurement, important instrument considerations, gripping of test specimens, test diagnostics, and the use of computers for gathering and reducing data. The influence of the machine stiffness on the test results is also described, along with a general assessment of test accuracy, precision, and repeatability of modern equipment. The chapter discusses various types of testing machines and their operations. Emphasis is placed on strain-sensing equipment. The chapter briefly describes load condition factors, such as strain rate, machine rigidity, and various testing modes by load control, speed control, strain control, and strain-rate control. It provides a description of environmental chambers for testing and discusses the processes involved in the force verification of universal testing machines. Specimen geometries and standard tensile tests are also described.

This chapter details low-temperature test procedures and equipment. It discusses the role temperature plays in the properties of typical engineering materials. The effect that lowering the temperature of a solid has on the mechanical properties of a material is summarized for three principal groups of engineering materials: metals, ceramics, and polymers (including fiber-reinforced polymers). The chapter describes the factors that influence the selection of tensile testing procedures for low-temperature evaluation, along with a comparison of tensile and compression tests. It covers the parameters and standards related to low-temperature tensile testing. The chapter discusses the factors involved in controlling test temperature. Finally, the chapter discusses the safety issues concerning the use of cooled methanol, liquid-nitrogen, and liquid helium.

The inspection of castings normally involves checking for shape and dimensions, coupled with aided and unaided visual inspection for external discontinuities and surface quality. This chapter discusses methods for determining surface quality, internal discontinuities, and dimensional inspection. Casting defects including porosity, oxide films, inclusions, hot tears, metal penetration, and surface defects are reviewed. Liquid penetrant inspection, magnetic particle inspection, eddy current inspection, radiographic inspection, ultrasonic inspection, and leak testing for castings are discussed. The chapter provides information on the procedures involved in the inspection of castings that are limited to visual and dimensional inspections, weight testing, and hardness testing. It also discusses the use of computer equipment in foundry inspection operations.

High strain rate tensile testing is used to understand the response of materials to dynamic loading. The behavior of materials under high strain rate tensile loads may differ considerably from that observed in conventional tensile tests. This chapter discusses the processes involved in determining strain rate effects in tension by conventional tensile tests and covers expanding ring tests, flat plate impact tests, split-Hopkinson pressure bar tests, and rotating wheel tests.

This chapter discusses the factors that influence the cost and complexity of machining titanium alloys. It explains how titanium compares to other metals in terms of cutting force and power requirements and how these forces, along with cutting speeds and the use of cutting fluids, affect tool life, surface finish, and part tolerances. The chapter also includes a brief review of nontraditional machining methods.

This chapter gives an overview of how steel castings may be effectively adapted to modern concurrent engineering processes. The chapter discusses computer aided design programs, solid modeling, solidification simulation programs, and rapid prototyping.

This appendix provides readers with worked solutions to 25 problems involving calculations associated with tensile testing and the determination of mechanical properties and variables. The problems deal with engineering factors and considerations such as stress and strain, loading force, sample lengthening, and machine stiffness, and with mechanical properties and parameters such as elastic modulus, Young’s modulus, strength coefficient, strain-hardening exponent, and modulus of resilience. They also cover a wide range of materials including various grades of aluminum and steel as well as iron, titanium, brass, and copper alloys.

This chapter presents the factors affecting machinability. It provides a detailed discussion on the machining of steel castings. These include microstructure effects, hardness and strength effects, turning, face milling and drilling, casting surface effects, and weld area effects. The chapter also presents an overview of machining practices.