This chapter describes the properties and attributes of various classes of metalworking lubricants, including mineral oils; natural oils, fats, derivatives, and soaps; synthetic fluids (olefins, esters, polyglycols, ionic liquids); compounded lubricants (oils, greases, fats); aqueous lubricants (emulsions, synthetics, solutions); and a wide range of coatings and carriers. It also discusses solid-film lubricants (oxide films, polymer films, layer-lattice compounds) and environmental and safety concerns.

This chapter discusses the advantages and limitations of 3D printing technology for the production of batteries and supercapacitors. It explains how 3D printing methods facilitate the build of microdevices with hierarchical nanoarchitectures and controlled microstructure. It also reviews recent progress in fabricating electrodes and electrolytes using 3D-printed functional materials.

Bonding in solids may be classified as either primary or secondary bonding. Methods of primary bonding include the metallic, ionic, and covalent bonds. This chapter discusses and provides a comparison of the properties of these bonds. This is followed by a discussion on crystalline structure, providing information on space lattices and crystal systems, hexagonal close-packed systems, and face-centered and body-centered cubic systems. The chapter then covers slip systems and closes with a brief section on allotropic transformations that occur at a constant temperature during either heating or cooling.

This chapter introduces many of the key concepts on which metallurgy is based. It begins with an overview of the atomic nature of matter and the forces that link atoms together in crystal lattice structures. It discusses the types of imperfections (or defects) that occur in the crystal structure of metals and their role in mechanical deformation, annealing, precipitation, and diffusion. It describes the concept of solid solutions and the effect of temperature on solubility and phase transformations. The chapter also discusses the formation of solidification structures, the use of equilibrium phase diagrams, the role of enthalpy and Gibb’s free energy in chemical reactions, and a method for determining phase compositions along the solidus and liquidus lines.

This chapter discusses the foundational principles of materials science. It begins with a review of the periodic table and the fundamental particles, including atoms, ions, and molecules, that constitute matter. It also reviews the types of bonds that form between atoms and the relative levels of force they produce. It describes the difference between crystalline and noncrystalline or amorphous materials and discusses common crystal structures, including face-centered cubic, body-centered cubic, hexagonal close packed, and diamond cubic. It also describes the structure of sodium chloride and includes a list of structurally similar compounds.

This chapter describes the physical characteristics, properties, and behaviors of solid solutions under equilibrium conditions. It begins with a review of a single-component pure metal system and its unary phase diagram. It then examines the solid solution formed by copper and nickel atoms. It discusses the difference between interstitial and substitutional solid solutions and the factors that determine the type of solution that two metals are likely to form. It also addresses the development of intermediate phases, the role of free energy, transformation kinetics, liquid-to-solid and solid-state phase transformations, and the allotropic nature of metals.

This appendix provides a detailed overview of the crystal structure of metals. It describes primary bonding mechanisms, space lattices and crystal systems, unit cell parameters, slip systems, and crystallographic planes and directions as well as plastic deformation mechanisms, crystalline imperfections, and the formation of surface or planar defects. It also discusses the use of X-ray diffraction for determining crystal structure.

This chapter examines some of the behaviors that suit materials for electrical and electronic applications. It begins by explaining how charge carriers move in metals and semiconductors and how properties such as conductivity, mobility, and resistivity are derived. It discusses the significance of energy bands, intrinsic and extrinsic conduction, and the properties of compound semiconductors. It also covers semiconductor devices, including p-n junctions, light emitting diodes, transistors, and piezoelectric crystals.

This chapter discusses the composition, properties, and uses of crystalline ceramics, glasses, clay, and concrete mixes. It also discusses the carbon structure of diamond, graphite, fullerenes, and nanotubes.

This chapter reviews the basic chemistry of beryllium metals and compounds, including beryllium hydroxide, beryllium carbonates, beryllium fluoride, and beryllium chloride. It discusses the uses as well as application challenges of various forms of beryllium and includes information on their chemical properties and reactions.

This chapter provides an overview of a computational method, called CALPHAD, used for the study of phase equilibria in multicomponent systems. It describes the thermodynamic models and calculation techniques employed in the software and explains how it applies to complex alloys used in industry. It also provides examples showing how CALPHAD has been used to determine the formability of metallic glass, calculate the dilation of stainless steel during phase transformation, and predict the beta transus and approach curves of commercial titanium alloys.

Ceramics normally have high melting temperatures, excellent chemical stability and, due to the absence of conduction electrons, tend to be good electrical and thermal insulators. They are also inherently hard and brittle, and when loaded in tension, have almost no tolerance for flaws. This chapter describes the applications, properties, and behaviors of some of the more widely used structural ceramics, including alumina, aluminum titanate, silicon carbide, silicon nitride, zirconia, zirconia-toughened alumina (ZTA), magnesia-partially stabilized zirconia (Mg-PSZ), and yttria-tetragonal zirconia polycrystalline (Y-TZP). It also provides information on materials selection, design optimization, and joining methods, and covers every step of the ceramic production process.

Surface cleanliness requirements depend on which nitrocarburizing process is selected for component treatment. This chapter discusses the processes involved in some of the more commonly used precleaning methods for gas ferritic nitrocarburizing and provides information on the methods used to accomplish enhanced plasma cleaning.

This appendix is a compilation of terms and definitions related to corrosion.

Passive components can be broadly divided into capacitors, resistors, and inductors. Failure analysis of these components helps determine the root cause and improve the overall quality and reliability of the electronic systems. This article describes different failure analysis approaches used for these components. It discusses different types of capacitors along with their constructions and failure modes. The types include tantalum, aluminum electrolytic, multi-layered ceramics, film, and super capacitors. The article then provides a discussion on the two common types of inductors, namely, common mode choke coil and surface mount powder choke coil.

This chapter is a compilation of terms and definitions related to corrosion in the petrochemical industry.

This chapter describes the basic steps in the steelmaking process. It explains how iron is reduced from ore in the liquid state through the classic blast furnace process and in the solid state by direct reduction. It discusses the conversion of iron to steel and the technological advancements that led from open hearth steelmaking to basic oxygen processes and ultimately the electric arc furnace (EAF). It describes the versatility, efficiency, and scalability of the EAF process and its impact on recycling and sustainability. It explains how EAF refining and deoxidation practices have changed over time, and describes secondary refining processes such as degassing, homogenization, rinsing, and remelting.