This chapter contains sample problems with worked solutions pertaining to the application of corrosion inhibitors. Correct answers require an understanding of potentiodynamic polarization scan (PDS) curves, the determination of corrosion current and inhibitor efficiency, and the development of a test plan to evaluate the long-term corrosion protection of a potential inhibitor.

This chapter covers the engineering aspects of corrosion inhibitors and their effect on corrosion reactions. It explains how different metallic salts and heterocyclic compounds influence chemical reactions on metal surfaces exposed to corrosive media or environments. It describes how to evaluate inhibition efficiency through weight loss measurements, linear polarization resistance tests, electrochemical impedance spectroscopy, electrochemical noise monitoring, and surface analysis. It demonstrates the use of potentiodynamic polarization curves, Tafel extrapolations, equivalent circuit models, and various methods for characterizing corrosion damage and protective surface films. It also discusses typical applications, industry trends, and the emerging role of high-throughput experimentation, quantitative modeling, and machine learning in the development of cleaner and more effective corrosion inhibitors.

This chapter discusses the particular corrosion problems encountered and the methods of control used in petroleum production and the storage and transportation of oil and gas up to the refinery. It begins by describing those aspects of corrosion that tend to be unique to corrosion as encountered in applications involving oil and gas exploration and production. This is followed by a section reviewing the methods of corrosion control, namely the proper selection of materials, protective coatings, cathodic protection systems, use of inhibitors, use of nonmetallic materials, and control of the environment. The chapter ends with a discussion on the problems encountered and protective measures that are based on the state-of-the-art as practiced daily by corrosion and petroleum engineers and production personnel.

Corrosion can be defined as a chemical or electrochemical reaction between a material, usually a metal, and its environment that produces a deterioration of the material and its properties. This chapter describes the effects and economic impact of corrosion in major industrial plants. The emphasis in this chapter, as well as in other chapters in this book, is on aqueous corrosion, or corrosion in environments where water is present. The chapter describes the classification of various forms of corrosion based on the nature of the corrodent, mechanism of corrosion, and appearance of the corroded metal. It discusses five primary methods of corrosion control, namely, material selection, coatings, inhibitors, cathodic protection, and design. Examples of the opportunities in corrosion control and the means to implement a program to capitalize on those opportunities are presented in a table. The chapter concludes with varied sources of information pertaining to corrosion and corrosion prevention.

This chapter examines methods of internal corrosion prediction for multiphase pipelines and details methodologies to perform internal corrosion direct assessment for natural gas pipelines. Further, real-time monitoring techniques for assessing actual corrosion at critical locations are discussed.

This appendix is a compilation of terms and definitions related to corrosion.

This chapter discusses the principles of corrosion of metals in aqueous environments. The thermodynamics of aqueous corrosion is the subject of the first half of this chapter, which addresses concepts such as corrosion reactions and free-energy change, the relationship between free energy and electrochemical potential, the effect of ionic concentration on electrode potential, and the corrosion behavior of a metal based on its potential-pH diagram. The corrosion (potential-pH) behavior of iron, gold, copper, zinc, aluminum, and titanium are described. Understanding the kinetics of corrosion and the factors that control the rates of corrosion reactions requires examination of the concepts of polarization behavior and identification of the various forms of polarization in an electrochemical cell. These concepts, addressed in the remaining of this chapter, include anodic and cathodic reactions, the mixed-potential theory, and the exchange currents.

This article provides a basic review of polymer photochemistry as it relates to the weatherability of engineering plastics, considering the chemistry induced by exposure to sunlight in open air. Elementary aspects of weatherability chemistry that are discussed include the light wavelengths responsible for polymer photochemistry, problems with artificial light sources, general photooxidation and specific photochemical reactions important in plastics, and the factors influencing the rate of degradation. The approaches used to stabilize plastics against photochemical damage, including ultraviolet light absorbers, oxidation inhibitors, and the use of protective coatings, are also considered.

Corrosion testing and monitoring are powerful tools in the fight to control corrosion. This chapter provides a general overview of three major categories of corrosion tests, namely laboratory tests, pilot-plant tests, and field tests. It begins with brief sections describing the purposes of corrosion tests, the logical steps in a test program, and the preparation and cleaning of test specimens. The focus then moves on to discuss the types and applications of these test categories and the associated evaluation procedures. Excluding electrochemical tests which are addressed separately in this chapter, the other laboratory tests covered under this category are simulated atmosphere tests, salt-spray tests, and immersion tests. Only corrosion testing in the atmosphere is discussed in the section on field tests. Corrosion monitoring techniques are finally considered, covering the characteristics of corrosion monitoring techniques, the factors to be considered in selecting a corrosion-monitoring method, and the strategies in corrosion monitoring.

This chapter discusses corrosion prevention methods used with aluminum and its alloys. The methods range from relatively straightforward measures, such as proper handling and storage, to advanced early warning corrosion monitoring systems for military aircraft. The chapter summarizes the basic factors that influence design for corrosion resistance and discusses the use of conversion coatings, organic coatings, porcelain enameling, and electroplating. It also discusses corrosion monitoring methods used in chemical processing and refining industries.

This chapter discusses the corrosion behavior of titanium, the types of corrosion that can occur, and the effect of alloying on corrosion resistance. It explains that, due to its tenacious oxide film, titanium has excellent corrosion resistance in oxidizing environments and that the resistance can be extended into the “reducing-acid” region by adding a small amount of palladium. It describes how different grades of titanium respond to different forms of attack, including uniform, crevice, and galvanic corrosion. It also identifies applications where corrosion is often a concern.

This chapter describes the properties and attributes of various classes of metalworking lubricants, including mineral oils; natural oils, fats, derivatives, and soaps; synthetic fluids (olefins, esters, polyglycols, ionic liquids); compounded lubricants (oils, greases, fats); aqueous lubricants (emulsions, synthetics, solutions); and a wide range of coatings and carriers. It also discusses solid-film lubricants (oxide films, polymer films, layer-lattice compounds) and environmental and safety concerns.

This chapter presents the primary considerations and mechanisms for corrosion and how they are involved in the selection of materials for process equipment in petroleum refineries and petrochemical plants. In addition, specific information on mechanical properties, corrosion, sulfide stress cracking, hydrogen-induced cracking, stress-oriented hydrogen-induced cracking, hydrogen embrittlement cracking, stress-corrosion cracking, velocity-accelerated corrosion, erosion-corrosion, and corrosion control is provided.

Corrosion problems can be divided into eight categories based on the appearance of the corrosion damage or the mechanism of attack: uniform or general corrosion; pitting corrosion; crevice corrosion, including corrosion under tubercles or deposits, filiform corrosion, and poultice corrosion; galvanic corrosion; erosion-corrosion, including cavitation erosion and fretting corrosion; intergranular corrosion, including sensitization and exfoliation; dealloying; environmentally assisted cracking, including stress-corrosion cracking, corrosion fatigue, and hydrogen damage (including hydrogen embrittlement, hydrogen-induced blistering, high-temperature hydrogen attack, and hydride formation). All these forms are addressed in this chapter in the context of aqueous corrosion. For each form, a general description is provided along with information on the causes and the list of metals that can be affected, with particular emphasis on the recognition and prevention measures.

This chapter discusses the quenching process and its adaptation to induction heat treating. It describes the three stages of quenching, the cooling characteristics of various types of quenchants, and the details of nearly a dozen compatible quenching methods. It also explains how to verify whether a quenchant can cool a workpiece fast enough to achieve martensitic transformation without cracking or distortion.

This chapter describes two types of auxiliary equipment required in most induction heating installations: cooling systems and device timers. Water- and vapor-based systems used for cooling the power supply and the induction coil are described. The chapter concludes with a brief discussion of timers, with emphasis on open-loop timing systems.

This chapter focuses on various factors to be considered at design stage to minimize corrosion. It begins by providing information on design considerations and general corrosion awareness. This is followed by a description of several factors influencing materials-component failure. Details on design and materials selection, which assist in controlling corrosion, are then provided. The chapter ends with a discussion on the design factors that influence corrosion.

This chapter outlines the major types of corrosion, their interactions, their complicating effects on fracture and wear, and some possible prevention methods. The types of corrosion considered in the chapter are galvanic corrosion, uniform corrosion, pitting corrosion, crevice corrosion, microbiologically influenced corrosion, stress-corrosion cracking, and corrosion fatigue.

This chapter describes case depth and discusses flame hardening, laser heat treatment, electron beam hardening, induction heat treatment, and induction hardening.