This chapter describes the properties and attributes of various classes of metalworking lubricants, including mineral oils; natural oils, fats, derivatives, and soaps; synthetic fluids (olefins, esters, polyglycols, ionic liquids); compounded lubricants (oils, greases, fats); aqueous lubricants (emulsions, synthetics, solutions); and a wide range of coatings and carriers. It also discusses solid-film lubricants (oxide films, polymer films, layer-lattice compounds) and environmental and safety concerns.

This chapter describes the processes involved in alloy production, including melting, casting, solidification, and fabrication. It discusses the effects of alloying on solidification, the formation of solidification structures, supercooling, nucleation, and grain growth. It describes the design and operation of melting furnaces as well as melting practices and the role of fluxing. It also discusses casting methods, nonferrous casting alloys, and atomization processes used to make metal powders.

This chapter deals with the mechanics and tribology associated with the extrusion of bars, sections, and tubes. It covers direct and indirect extrusion processes in detail and demonstrates the use of important equations, relationships, and measurements for determining pressure, force, material flow, friction, die wear, heat generation, and lubrication requirements. The chapter also provides information on hydrostatic, friction-assisted, and severe plastic deformation extrusion processes, discusses the cause of instabilities and defects, and explains how to select and apply lubricants to minimize friction and die wear when extruding steel, aluminum, copper, and refractory metals.

Forging is a deformation process achieved through the application of compressive stresses. During the stroke, pressures and velocities are continuously changing and the initial lubricant supply must suffice for the duration of the operation. Lubricant residues and pickup products also change with time, further complicating the analysis of friction and wear. This chapter provides a qualitative and quantitative overview of the mechanics and tribology of forging in all of its forms. It discusses the effects of friction, pressures, forces, and temperature on the deformation and flow of metals in open-die, closed-die, and impression-die forging and in back extrusion and piercing operations. It presents various ways to achieve fluid-film lubrication in upset forging processes and examines the cause of barreling, defect formation, and folding in the upsetting of cylinders, rings, and slabs. It also explains how to evaluate lubricants, friction, and wear under hot, cold, and warm forging conditions and how to extend die life and reduce defects when processing different materials.

Drawing is a bulk deformation process that involves significant surface generation and high pressures. This chapter provides an overview of the mechanics and tribology of wire, bar, tube, and shape drawing. It presents important equations for calculating stresses, forces, friction, heat, strain, and distortion for different tooling configurations and geometries. It explains how to select and apply lubricants based on drawing speed, die design, and other factors and how to maintain sufficient film thickness for hydrodynamic, mixed, and solid-film lubrication conditions. It also discusses the use of vibrating dies, the influence of surface finish and defects, and lubrication practices for specific materials.

This chapter covers the mechanics and tribology of sheet metalworking processes, including shearing, bending, spinning, stretching, deep drawing, ironing, and hydroforming. It explains how to determine friction, wear, and lubrication needs based on process forces, temperatures, and strains and the effects of strain hardening on workpiece materials. It presents test methods for evaluating process tribology, describes lubrication and wear control approaches, and discusses the factors, such as surface roughness, lubricant breakdown, and adhesion, that can lead to galling and other forms of wear. It also provides best practices for selecting, evaluating, and applying lubricants for specific materials, including steels, stainless steels, and aluminum and magnesium alloys.