This chapter discusses the basic components in an induction heat treating system. It describes the design and operating characteristics of power supplies, load-matching transformers, tuning capacitors, power regulators, controllers, process monitors, and diagnostic systems. It also provides information on fixtures and work-handling devices, quench systems, and load matching and tuning procedures.

This chapter examines methods of internal corrosion prediction for multiphase pipelines and details methodologies to perform internal corrosion direct assessment for natural gas pipelines. Further, real-time monitoring techniques for assessing actual corrosion at critical locations are discussed.

The aim of every extrusion plant is the efficient production of competitive products that meet the appropriate quality requirements. This chapter discusses the processes involved in the selection and introduction of a quality management system, along with its application, advantages, and disadvantages. It describes the process chain for order processing within the quality circle and provides information on product liability legal issues. In addition, the chapter discusses the processes involved in quality control, along with its organization, responsibilities, audits, and testing.

This chapter addresses in-service monitoring and corrosion testing of weldments. Three categories of corrosion monitoring are discussed: direct testing of coupons, electrochemical techniques, and nondestructive testing techniques. The majority of the test methods for evaluating corrosion of weldments are used to assess intergranular corrosion of stainless steels and high-nickel alloys. Other applicable tests evaluate pitting and crevice corrosion, stress-corrosion cracking, and microbiologically influenced corrosion. Each of these test methods is reviewed in this chapter.

The challenge of materials selection is to achieve adequate performance at the lowest possible cost. Corrosion resistance is not the only property to be considered in making materials selections. Typical requirements and some of the procedures involved in making a selection and some of the factors that must be considered when determining the corrosion performance of a given material are listed in this chapter. The various steps that might be included in a materials selection process are then examined. These include a review of operating conditions and design, the selection of candidate materials, the in-depth evaluation of each candidate material, fabrication requirements, follow-up monitoring, and final materials selection. Material considerations such as cost, materials properties, and processing and fabrication requirements are subsequently covered. Finally, the chapter provides information on materials selection under general corrosion conditions and under conditions of localized corrosion forms such as pitting, crevice corrosion, and stress-corrosion cracking.

This chapter presents the primary considerations and mechanisms for corrosion and how they are involved in the selection of materials for process equipment in petroleum refineries and petrochemical plants. In addition, specific information on mechanical properties, corrosion, sulfide stress cracking, hydrogen-induced cracking, stress-oriented hydrogen-induced cracking, hydrogen embrittlement cracking, stress-corrosion cracking, velocity-accelerated corrosion, erosion-corrosion, and corrosion control is provided.

Welded joints in any component or structure require a thorough inspection. The role of nondestructive evaluation (NDE) in the inspection of welds is very important, and the technology has become highly developed as a result. This article describes the applications, methods, evaluation procedures, performance, and limitations of NDE. It provides information on the training and certification of NDE operators, evaluation of test results, and guidance to method selection. Typical examples of various NDE methods for welds are also described.

This chapter discusses the maintenance needs of major components in induction heat-treating systems, including power supplies, heat stations, capacitors, high-frequency output stages, induction coils, water systems, quench systems, and fixturing.

This chapter discusses the types of sensors used in sheet forming operations and the information they provide. It explains how force sensors protect equipment from overloads due to tool wear, friction, and misfeeds, how displacement and proximity sensors help to prevent die crashes, how acoustic emission, ultrasonic, and eddy current sensors detect tool breakage and part defects such as cracks, and how roller ball and optical sensors measure material flow. It also discusses the role of draw-in, wrinkle, oil-monitoring, and vision sensors and explains how material properties can be derived in real time from various sensor outputs.

This chapter describes various units and process streams that are often susceptible corrosion inhibitors in crude oil refineries, discusses the types and applications of corrosion inhibitors, and provides some information on corrosion monitoring techniques used at refineries.

This chapter provides an overview of key elements in controlling the casting process, systems to confirm the quality of outgoing components, and the steps needed to launch a novel product. The discussion also provides information on process control tools and techniques; incoming material control; process control of sand preparation and system maintenance; metallic charge materials; product quality control; and melting, metallurgical, and mechanical testing.

Corrosion testing and monitoring are powerful tools in the fight to control corrosion. This chapter provides a general overview of three major categories of corrosion tests, namely laboratory tests, pilot-plant tests, and field tests. It begins with brief sections describing the purposes of corrosion tests, the logical steps in a test program, and the preparation and cleaning of test specimens. The focus then moves on to discuss the types and applications of these test categories and the associated evaluation procedures. Excluding electrochemical tests which are addressed separately in this chapter, the other laboratory tests covered under this category are simulated atmosphere tests, salt-spray tests, and immersion tests. Only corrosion testing in the atmosphere is discussed in the section on field tests. Corrosion monitoring techniques are finally considered, covering the characteristics of corrosion monitoring techniques, the factors to be considered in selecting a corrosion-monitoring method, and the strategies in corrosion monitoring.

This chapter discusses the particular corrosion problems encountered and the methods of control used in petroleum production and the storage and transportation of oil and gas up to the refinery. It begins by describing those aspects of corrosion that tend to be unique to corrosion as encountered in applications involving oil and gas exploration and production. This is followed by a section reviewing the methods of corrosion control, namely the proper selection of materials, protective coatings, cathodic protection systems, use of inhibitors, use of nonmetallic materials, and control of the environment. The chapter ends with a discussion on the problems encountered and protective measures that are based on the state-of-the-art as practiced daily by corrosion and petroleum engineers and production personnel.

Casting quality and consistency need to be carefully controlled. This chapter discusses the procedures that describe the process and product quality controls. In addition, it provides information on quality assurance programs.

This chapter concentrates almost exclusively on inspection techniques related to pressure vessels and pipework. The discussion covers the general aspects associated with inspection and the key factors relevant to it. In addition, the chapter addresses processes involved in data collection and management, namely data acquisition, reporting, trending, reviewing, and auditing. Capabilities and limitations of in-service inspection techniques are discussed in the Appendix to this chapter.

This chapter discusses corrosion prevention methods used with aluminum and its alloys. The methods range from relatively straightforward measures, such as proper handling and storage, to advanced early warning corrosion monitoring systems for military aircraft. The chapter summarizes the basic factors that influence design for corrosion resistance and discusses the use of conversion coatings, organic coatings, porcelain enameling, and electroplating. It also discusses corrosion monitoring methods used in chemical processing and refining industries.

This chapter discusses the methods and procedures used for inspecting induction-hardened parts. It provides information on hardness and case depth measurements, nondestructive testing and surface analysis, the effect of various hardening errors, and relevant test standards.

This chapter discusses equipment used for ferritic nitrocarburizing, including salt bath furnaces, atmosphere furnaces, and plasma furnaces. It also describes the processes involved in ferritic oxynitrocarburizing.

A successful heat treating operation is determined by the ability to satisfy the customer's quality requirements consistently and economically. This chapter reviews the steps that are important to produce quality parts in heat treating with a brief practical explanation of each. The steps include selecting proper material and design of the part being treated; determining whether the process is capable of heat treatment; using statistical process control, control charting, and in-process inspection and testing; and applying statistical quality control and final testing (sampling) to verify the results.

Induction heating is a rapid, efficient technique for producing localized or through heating in a wide range of industries. The economics as well as the technical feasibility of induction heating should be important considerations prior to investing in such a system. A number of cost elements enter into the analysis. These include equipment and energy costs, production lot size and ease of automation, material savings, labor costs, and maintenance requirements. This chapter discusses each of these factors. It compares the cost elements of induction heating with those of its main competitor, gas-fired furnace heating. Several typical examples are provided to illustrate the economic considerations in design and application of induction heating processes.