Search Results for gear tooth failures

This chapter reviews the knowledge of the field of gear tribology and is intended for both gear designers and gear operators. Gear tooth failure modes are discussed with emphasis on lubrication-related failures. The chapter is concerned with gear tooth failures that are influenced by friction, lubrication, and wear. Equations for calculating lubricant film thickness, which determines whether the gears operate in the boundary, elastohydrodynamic, or full-film lubrication range, are given. Also, given is an equation for Blok's flash temperature, which is used for predicting the risk of scuffing. In addition, recommendations for lubricant selection, viscosity, and method of application are discussed. The chapter discusses in greater detail the applications of oil lubricant. Finally, a case history demonstrates how the tribological principles discussed in the chapter can be applied practically to avoid gear failure.

This chapter summarizes the various kinds of gear wear and failure and how gear life in service is estimated and discusses the kinds of flaws in material that may lead to premature gear fatigue failure. The topics covered are alignment, gear tooth, surface durability and breakage of gear tooth, life determined by contact stress and bending stress, analysis of gear tooth failure by breakage after pitting, and metallurgical flaws that reduce the life of gears. The chapter briefly reviews some components in the design and structure of each gear and/or gear train that must be considered in conjunction with the teeth to enhance fatigue life.

Gears can fail in many different ways, and except for an increase in noise level and vibration, there is often no indication of difficulty until total failure occurs. This chapter begins with the classification of gear failure modes, followed by sections discussing the characteristics of various fatigue failures. Then, it provides information on the modes of impact fractures, wear, scuffing, and stress rupture. Next, the chapter describes the causes of gear failures and discusses the processes involved in conducting the failure analysis. Finally, the chapter presents examples of gear failure analysis.

Mechanical tests are performed to evaluate the durability of gears under load. The chapter first discusses the processes involved in the computations of stress for test parameters of gear. Next, the chapter reviews the four areas of specimen characterization of a test program, namely dimensional, surface finish texture, metallurgical, and residual stress. The following section presents the tests that simulate gear action, namely the rolling contact fatigue test, the single-tooth fatigue test, the single-tooth single-overload test, and the single-tooth impact test. Finally, the chapter describes the test procedures for surface durability (pitting), root strength (bending), and scoring (or scuffing) testing.

This chapter presents a detailed discussion on the three most frequent gear failure modes. These include tooth bending fatigue, tooth bending impact, and abrasive tooth wear. Tooth bending fatigue includes surface contact fatigue (pitting), rolling contact fatigue, contact fatigue (spalling), thermal fatigue, and shaft fatigue. Tooth bending impact includes tooth shear, tooth chipping, case crushing, and torsional shear.

This chapter analyzes four gearbox failures, in each case identifying the underlying failure mechanism and recommending changes to reduce vibration. These include failure of an offset parallel gearbox due to gear tooth geometry error; high vibration on high-speed offset parallel gearbox; failure of an epicyclic gearbox; and vibration due to tooth wear.

This chapter explains how to take the known facts of a specific failure, place them in a systematic context to arrive at a logical conclusion, and point to a corrective measure. It presents example examinations to describe a systematic approach to failure examination.

This chapter presents the purpose, design, and function of a gear. It also presents the basic stresses applied to a gear tooth. The chapter provides an overview on the bending strength and characteristics of the gear tooth.

This chapter focuses on the causes of gear failure under five major headings. These include basic material, focusing on steel, engineering, focusing on the integration of design, manufacturing, heat treatment, and service application.

Nitriding is a case-hardening process used for alloy steel gears and is quite similar to case carburizing. Nitriding of gears can be done in either a gas or liquid medium containing nitrogen. This chapter discusses the processes involved in gas nitriding. It reviews the effects of white layer formation in nitrided gears and presents general recommendations for nitrided gears. The chapter describes the microstructure, overload and fatigue damage, bending-fatigue life, cost, and distortion of nitrided gears. Information on nitriding steels used in Europe and the applications of nitrided gears are also provided. The chapter presents case studies on successful nitriding of a gear and on the failure of nitrided gears used in a gearbox subjected to a load with wide fluctuations.

This chapter discusses field, visual, physical, and metallurgical examinations of gear failures. Physical examinations reviewed include nondestructive testing, including magnetic-particle inspection, tooth characteristic studies, surface hardness testing, ultrasonic testing, nital etching, profilometer measurements, and dimensional checking. Metallurgical examinations reviewed include the cross-sectional hardness survey, macroscopic examination, carbon gradient traverse, chemical analysis, case hardness traverse [microhardness], microscopic examination, and scanning electron microscopy.

In the case of gearboxes, vibration is the primary mode of failure even at the mid-range of operating speeds. Avoiding such failures requires an understanding of gearbox design, vibration theory, and material properties. This chapter details sources and types of gearbox vibrations; characteristics of gearbox vibrations; fundamentals of periodic vibrations; and vibration theory. It provides housing design for single-stage offset parallel gearboxes, high-speed gearboxes, and epicyclic gearboxes. The chapter then provides an analysis and selection of design factors for vibration reduction. It presents five types of gear tooth geometry errors. The chapter also focuses on gear quality inspection and on bearing-induced vibrations.

The primary objective of carburizing and hardening gears is to secure a hard case and a relatively soft but tough core. For this process, low-carbon steels (up to a maximum of approximately 0.30% carbon), either with or without alloying elements (nickel, chromium, manganese, molybdenum), normally are used. The processes involved in hardening, tempering, recarburizing, and cold treatment of carburized and quenched gears are discussed. Next, the chapter reviews the selection of materials for carburized gears and considerations related to carbon content, core hardness, and microstructure. This is followed by sections discussing some problems that can be experienced in the carburizing process and how these can be addressed, including a section on shot peening to induce compressive residual stress at and below the surface. It then discusses the applications of carburized gears and finally presents a case history of distortion control of carburized and hardened gears.

Nitriding is a surface hardening heat treatment that introduces nitrogen into the surface of steel while it is in the ferritic condition. Gas nitriding using ammonia as the nitrogen-carrying species is the most commonly employed process and is emphasized in this chapter. Nitriding produces a wear- and fatigue-resistant surface on gear teeth and is used in applications where gears are not subjected to high shock loads or contact stress. It is useful for gears that need to maintain their surface hardness at elevated temperatures. Gears used in industrial, automotive, and aerospace applications are commonly nitrided. This chapter discusses the processes involved in gas, controlled, and ion nitriding.