Structural and fracture mechanics-based tools for metals are believed to be applicable to nonmetals, as long as they are homogeneous and isotropic. This chapter discusses the essential aspects of the fatigue and fracture behaviors of nonmetallic materials with an emphasis on how they compare with metals. It begins by describing the fracture characteristics of ceramics and glasses along with typical properties and subcritical crack growth mechanisms. It then discusses the properties of engineering plastics and the factors affecting crack formation and growth, fracture toughness, fatigue life, and stress rupture failures.

Steels with martensitic and tempered martensitic microstructures, though sometimes perceived as brittle, exhibit plasticity and ductile fracture behavior under certain conditions. This chapter describes the alloying and tempering conditions that produce a ductile form of martensite in low-carbon steels. It also discusses the effect of tempering temperature on the mechanical behavior and deformation properties of medium-carbon steels.

This chapter covers the fatigue and fracture behaviors of ceramics and polymers. It discusses the benefits of transformation toughening, the use of ceramic-matrix composites, fracture mechanisms, and the relationship between fatigue and subcritical crack growth. In regard to polymers, it covers general characteristics, viscoelastic properties, and static strength. It also discusses fatigue life, impact strength, fracture toughness, and stress-rupture behaviors as well as environmental effects such as plasticization, solvation, swelling, stress cracking, degradation, and surface embrittlement.

Amorphous alloys, because of their lack of crystallographic slip planes, are assumed to be insensitive to the selective corrosion attack that causes stress-corrosion cracking (SCC) in crystalline alloys. However, under certain conditions, melt-spun amorphous alloys have proven vulnerable to SCC due to hydrogen embrittlement. This chapter presents findings from several studies on this phenomenon, describing test conditions as well as cracking and fracture behaviors. It also discusses the effect of deformation on corrosion behavior, particularly for alloys without strongly passivating elements.

This chapter reviews the concepts of fracture mechanics and their application to materials evaluation and the design of cryogenic structures. Emphasis is placed on an explanation of technology, a review of fracture mechanics testing methods, and a discussion on the many factors contributing to the fracture behavior of materials at cryogenic temperatures. Three approaches of elastic-plastic fracture mechanics are covered, namely the crack opening displacement, the J-integral, and the R-curve methods. The chapter also discusses the influence of thermal and metallurgical effects on toughness at low temperatures.

This chapter familiarizes readers with tempering and refrigeration treatments and their effect on case-carburized parts. It explains how tempering makes such parts easier to machine, more structurally and dimensionally stable, and more durable in certain applications. It identifies key process parameters and provides test data showing how they affect hardness, yield strength, bending and contact fatigue, and fracture toughness. It also addresses potential problems stemming from process-related factors such as the presence of hydrogen and the effects of aging and grinding. In regard to refrigeration, the chapter explains that it is not uncommon for subzero treatments to be included in the production of carburized parts whether as a standard procedure or optional step. Subzero cooling promotes the transformation of retained austenite to martensite, thereby increasing surface hardness and reducing the propensity of quenched carburized steels to burn and crack during surface grinding. The chapter includes numerous data plots and tables showing how the various treatments influence hardness, wear resistance, tensile properties, and fatigue and fracture behaviors.

This chapter discusses the composition, properties, microstructure, grain formation, and fracture behavior of gray, white, ductile, and malleable cast iron and how these critical factors are affected when iron is heated to different temperatures prior to or during solidification.

This chapter discusses the stress-strain response of materials, how it is measured, and how it used to set performance expectations. It begins by describing the common tensile test and how it sheds light on the elastic design of structures as well as plasticity and fracture behaviors. It explains how engineering and true stress-strain curves differ, how one is used for design and the other for analyzing metal forming operations. It discusses the effect of holes, fillets, and radii on the distribution of stresses and the use of notch tensile testing to detect metallurgical embrittlement. The chapter also covers compression, shear, and torsion testing, the prediction of yielding, residual stress, and hardness.

Gas carburizing is known to promote internal oxidation in steel which can adversely affect certain properties. This chapter discusses the root of the problem and its effect on component lifetime and performance. It explains that gas-carburizing atmospheres contain water vapor and carbon dioxide, providing oxygen that reacts with alloying elements, particularly manganese, chromium, and silicon. It examines the composition and distribution of oxides produced in different steels and assesses the resulting composition gradients. It describes how these changes influence the development of high-temperature transformation products as well as microstructure, hardenability, and carbon content and properties such as fatigue and fracture behaviors, hardness, and wear resistance. It also explains how to manage internal oxidation through material design, process control, and other measures.

This chapter explains how decarburization can occur during carburizing processes and how to limit the severity of its effects. It describes the reactions and conditions that result in a loss of carbon atoms and how they vary with changes in the physical metallurgy of the affected material and the processing environment. It examines the characteristic features of decarburized microstructures and assesses their influence on hardness, residual stresses, and fatigue and fracture behaviors. It also discusses corrective measures and practical considerations regarding their use.

This chapter discusses the formation of free carbides and their effect on case-carburized components. It explains how alloying elements influence the composition and structure of carbide phases produced at cooling rates typical of carburizing process. It describes the morphology and distribution of the various types of carbides formed and explains how they affect mechanical properties such as hardness, residual stresses, fatigue and fracture behaviors, and wear resistance. It also provides guidance for determining what processing conditions to avoid and when and why parts should be rejected.

This chapter addresses the issue of retained austenite in quenched carburized steels. It explains why retained austenite can be expected at the surface of case-hardened components, how to estimate the amount that will be present, and how to effectively stabilize or otherwise control it. It presents detailed images and data plots showing how retained austenite appears and how it influences hardness, tensile properties, residual stresses, fatigue and fracture behaviors, and wear resistance.

Depending on the operating environment and the nature of the applied loading, a structure can fail by a number of different modes, including brittle fracture, ductile fracture, plastic collapse, fatigue, creep, corrosion, and buckling. These failure modes can be broken down into the categories of fracture, fatigue, environmental cracking, and high-temperature creep. This article discusses each of these categories, as well as the benefits of a fitness-for-service approach.