Search Results for experimental error

This chapter explains how to determine flow stress and forgeability using data from tensile tests, compression tests, ring tests, and torsion tests. It describes sample preparation, tooling and equipment, test procedures, error sources, and data plotting techniques. It also provides a significant amount of experimentally derived flow stress data, including K and n values for steel, copper, and aluminum alloys, C and m values (at various temperatures) for steel, aluminum, copper, titanium, and other alloys, and average flow stress for several alloys determined by compression testing.

This chapter presents basic principles and the theoretical results of heat transport in solids. Thermal conductivity and thermal diffusivity are the principal properties discussed. Discussions are also included on the effects of temperature, magnetic field, and metallurgical variations caused by composition, processing, and heat-treatment differences. Numerous graphs illustrate the qualitative and quantitative effects of these variables. Measurement methods and associated accuracies and pertinent empirical correlations are presented.

Through-hardening heat treatment is generally used for gears that do not require high surface hardness. In through hardening, gears are first heated to a required temperature and then cooled either in the furnace or quenched in air, gas, or liquid. Four heat treatment methods are primarily used for through-hardened gears: annealing, normalizing and annealing, normalizing and tempering, and quenching and tempering. This chapter begins with a discussion of these through-hardening processes. This is followed by sections providing some factors affecting the design and hardness levels of through-hardened gears. Next, the chapter reviews the considerations related to distortion of through-hardened gears. It then discusses the applications of through-hardened gears. Finally, the chapter presents a case history of the design and manufacture of a through-hardened gear rack.

The through-hardening process is generally used for gears that do not require high surface hardness. Four different methods of heat treatment are primarily used for through-hardened gears. In ascending order of achievable hardness, these methods are annealing, normalizing and annealing, normalizing and tempering, and quenching and tempering. This chapter discusses the processes involved in the through-hardening of gears. It provides information on designing procedures, hardness, distortion, and applications of the through-hardened gears. The chapter presents a case history on the design and manufacture of a through-hardened gear rack.

The testing of plastics includes a wide variety of chemical, thermal, and mechanical tests. This chapter reviews the tensile testing of plastics, which has been standardized in ASTM D 638, "Standard Test Method for Tensile Properties of Plastics," and other comparable standards. It describes the fundamental factors that affect data from tensile tests, examines the stipulations in standardized tensile testing, and discusses the utilization of data from tensile tests.

The cyclic nature of gearbox vibration lends itself well to the analysis in the frequency domain where the effects of a gear mesh, bearing defects, and other sources of vibration are effectively set apart, making it much easier to identify and correct the underlying causes of vibration. This chapter presents spectral maps that show how gearbox vibrations change with the rotational speed of components. It then explains how to identify the sources of vibration in a high-speed gearbox. The chapter also discusses other errors including backlash, ghost frequencies, unbalance, misalignment, mechanical looseness, and index variation form errors. It also presents the calculation of gear frequencies on gearbox vibration spectra and the influence of operating conditions.

This chapter analyzes four gearbox failures, in each case identifying the underlying failure mechanism and recommending changes to reduce vibration. These include failure of an offset parallel gearbox due to gear tooth geometry error; high vibration on high-speed offset parallel gearbox; failure of an epicyclic gearbox; and vibration due to tooth wear.

After the failure analysis team hypothesizes failure causes, prepares a failure mode assessment and assignment, and evaluates all potential failure causes, it may find in some cases that several causes are still suspect but cannot be confirmed. In this situation, an experiment is necessary to confirm or rule out suspected causes. This chapter discusses two predominant methods for doing this, namely analysis of variance (ANOVA) and Taguchi methods (a more powerful technique based on ANOVA).

This chapter reviews the current technology and examines force application systems, force measurement, strain measurement, important instrument considerations, gripping of test specimens, test diagnostics, and the use of computers for gathering and reducing data. The influence of the machine stiffness on the test results is also described, along with a general assessment of test accuracy, precision, and repeatability of modern equipment. The chapter discusses various types of testing machines and their operations. Emphasis is placed on strain-sensing equipment. The chapter briefly describes load condition factors, such as strain rate, machine rigidity, and various testing modes by load control, speed control, strain control, and strain-rate control. It provides a description of environmental chambers for testing and discusses the processes involved in the force verification of universal testing machines. Specimen geometries and standard tensile tests are also described.

This chapter discusses the use of finite-element methods for modeling cold forging processes. The discussion covers process modeling inputs, such as geometric parameters, material properties, and interface conditions, and includes several application examples.

This chapter discusses the role of inverse analysis in providing input data for finite element simulations of metal forming processes. It describes the basic procedures for determining flow stress and friction by inverse analysis and for comparing experimental measurements with corresponding computed data. It also includes an example in which flow stress and friction were measured in compressed aluminum rings and the results used to verify the accuracy of predicted values.

This chapter discusses some of the methods and measurements used to construct phase diagrams. It explains how cooling curves were widely used to determine phase boundaries, and how equilibrated alloys examined under controlled heating and cooling provide information for constructing isothermal and vertical sections as well as liquid projections. It also explains how diffusion couples provide a window into local equilibria and identifies typical phase diagram construction errors along with problems stemming from phase-boundary curvatures and congruent transformations.

In the case of gearboxes, vibration is the primary mode of failure even at the mid-range of operating speeds. Avoiding such failures requires an understanding of gearbox design, vibration theory, and material properties. This chapter details sources and types of gearbox vibrations; characteristics of gearbox vibrations; fundamentals of periodic vibrations; and vibration theory. It provides housing design for single-stage offset parallel gearboxes, high-speed gearboxes, and epicyclic gearboxes. The chapter then provides an analysis and selection of design factors for vibration reduction. It presents five types of gear tooth geometry errors. The chapter also focuses on gear quality inspection and on bearing-induced vibrations.

Phase diagrams serve as a map to the phases present in an alloy at different temperatures and compositions. They also help in assessing mechanical properties, selecting heat treat temperatures, warning of possible solidification problems, and identifying routes for creating desired microstructures. This chapter familiarizes readers with the information contained in binary phase diagrams and the methods used to extract it. It explains how thermocouple measurements are used to determine liquidus, solidus, and eutectic reaction lines, how differential scanning calorimetry shows where phase reactions occur, and how x-ray diffraction identifies the actual phases present. It demonstrates the use of tie lines for determining phase composition at different temperatures and the application of the level rule to calculate phase fractions. It also discusses the CALPHAD method and presents computed binary phase diagrams that account for the presence of inclusions, oxygen content, and secondary phases.

This chapter discusses the use of modeling and simulation technology in the development of sheet metal forming processes. It describes the five major steps involved in finite-element analysis and the various ways functions of interest can be approximated at each point or node in a finite-element mesh. It explains how to obtain input data, what to expect in terms of output data, and how to predict specific types of defects. In addition, it presents several case studies demonstrating the use of finite elements in blanking and piercing, deep drawing of round and rectangular cups, progressive die sequencing, blank holder force optimization, sheet hydroforming, hot stamping, and springback and bending of advanced high-strength steels. It also discusses the factors that affect the accuracy of finite element simulations such as springback, thickness variations, and nonisothermal effects.

Process gas control for plasma (ion) nitriding is a matter of estimating the flows necessary to accomplish the required surface metallurgy. This chapter reviews several studies aimed at better understanding process gas control in plasma nitriding and its influence on compound zone formation. Emphasis is placed on the effect of sputtering on the kinetics of compound zone formation. The discussion covers the processes involved in process gas control analysis by photo spectrometry and mass spectrometry and the difficulties associated with gas analysis.

This chapter provides an introduction to statistical process control and the concept of total quality management. It begins with a review of quality improvement efforts in the extrusion industry and the considerations involved in developing sampling plans and interpreting control charts. It then lays out the steps that would be followed in order to implement statistical testing for billet casting, die performance, or any other process or variable that impacts extrusion quality. The chapter concludes with an overview of the fundamentals of total quality management.

This chapter provides a practical overview of the tools and techniques used to assess the tribological aspects of metal forming processes. It describes test methods that have been developed to evaluate bulk deformation and sheet metal forming processes along with lubricant rheology, friction forces, and stress and strain distributions. It explains how to measure temperature between tooling and workpiece surfaces as well as surface topography and composition, film thickness, and wear. It also discusses the benefits of reduced-scale and simulation testing and the transfer of results from one process to another.