Search Results for electrical safety

This chapter describes the general hazards of induction heating and the hazards that are specific to induction joining processes. It also includes a brief discussion of economic considerations in the use of induction soldering.

This chapter provides a discussion of nitriding furnace equipment and control systems. The discussion covers the essential design criteria of the furnace, types of nitriding furnaces, insulation for the reduction of furnace heat losses, and factors influencing furnace configuration and design. It also covers the processes involved in the construction and maintenance of retorts, methods for sealing a retort to prevent ammonia leaks, and safety precautions to be taken while using ammonia. Further, the chapter provides information on the factors for choosing a heating medium and discusses the processes involved in controlling temperature, gas dissociation, oxygen probes, and nitriding sensors.

This chapter discusses some of the ways that the lessons learned from failures have benefitted society, leading to improved product designs, better materials, safer industrial processes, and more robust codes and standards. It also provides several examples of how the technology and procedures associated with aviation security have been upgraded in the wake of air disasters.

This chapter presents examples of aluminum infrastructure applications and their benefits to society. Infrastructure applications covered within this chapter include: electrical conductors; roads and bridges; highway signs, traffic signals, and license plates; railroad and highway crossings; solar energy generation; and agriculture and industrial applications.

The gravity permanent mold (GPM) process produces castings of high strength and integrity with good surface finish and consistent dimensions. This chapter lists castings produced using GPM and semipermanent mold (SPM). It illustrates the basic elements of a conventional tilt pour machine. The chapter also provides an overview of the high-volume rotary table, high-volume production rotary manufacturing cell, cycle time planning, sizes of tilt pour machine and table, and improvement of turntable uptime. It also presents some of the common semipermanent molded castings.

To ensure consistency, quality of results, and documentation compliance, audits are required when heat treating. This chapter introduces basic parts of the ISO certification program.

This chapter details low-temperature test procedures and equipment. It discusses the role temperature plays in the properties of typical engineering materials. The effect that lowering the temperature of a solid has on the mechanical properties of a material is summarized for three principal groups of engineering materials: metals, ceramics, and polymers (including fiber-reinforced polymers). The chapter describes the factors that influence the selection of tensile testing procedures for low-temperature evaluation, along with a comparison of tensile and compression tests. It covers the parameters and standards related to low-temperature tensile testing. The chapter discusses the factors involved in controlling test temperature. Finally, the chapter discusses the safety issues concerning the use of cooled methanol, liquid-nitrogen, and liquid helium.

The ability to accurately assess the remaining life of components is essential to the operation of plants and equipment, particularly those in service beyond their design life. This, in turn, requires a knowledge of material failure modes and a proficiency for predicting the near and long term effects of mechanical, chemical, and thermal stressors. This chapter presents a broad overview of the types of damage to which materials are exposed at high temperatures and the approaches used to estimate remaining service life. It explains how operating conditions in power plants and oil refineries can cause material-related problems such as embrittlement, creep, thermal fatigue, hot corrosion, and oxidation. It also discusses the factors and considerations involved in determining design life, defining failure criteria, and implementing remaining-life-assessment procedures.

This chapter presents the salts used and the process advantages of salt bath nitriding. It describes bath testing and analysis including the materials and equipment, analysis procedure, and determination of sodium carbonate and sodium cyanate for titration testing of the nitriding salt bath. The chapter explains the procedures for maintenance of the salt bath and related equipment. It also discusses safety precautions and design parameters for furnace equipment.

In some cases, the failure analysis team finds that all components meet their requirements, the system was properly assembled, and it was not operated or tested in an out-of-specification manner, yet it still failed. When this occurs, the only conclusion the failure analysis team can reach is that it missed something in its analysis or that the design is defective. This chapter focuses on the latter possibility by discussing the various factors that a failure analysis team should consider to identify the causes of defects in system design. These include requirements identification and verification, circuit performance, mechanical failures, materials compatibility, and environmental factors. Examples that illustrate the value of design analysis are also presented.

This chapter discusses equipment used for ferritic nitrocarburizing, including salt bath furnaces, atmosphere furnaces, and plasma furnaces. It also describes the processes involved in ferritic oxynitrocarburizing.

Advanced high-strength steels (AHSS) are best used for strong structural applications where lightweighting enhances the performance of a product. This chapter focuses on the applications of AHSS in the automotive industry. It explains the effect of automotive processing on AHSS components. The chapter also presents the nonautomotive applications of AHSS. It also provides the uses and trends of AHSS.

This chapter addresses some of the challenges involved in materials selection, providing context for much of the information presented in the book. It describes a typical four-step design scenario, noting material-related considerations and information needs. It explains how design decisions are complicated by the interconnected nature of material properties, design geometry, and manufacturing requirements and effects. The chapter also assesses the design impact of several materials and discusses codes, standards, and specifications.

This chapter discusses ultra-high-strength steels (UHSS) and gigapascal (GPa) steels and discusses the global formability diagram.

Iron and steel castings require cleaning as they come out of the shakeout units to remove any burned sand and sand that may remain stuck from the mold. This chapter presents the casting cleaning operation sequence. The sequence includes shot blasting; decoring or removal of cores from castings; degating or removal of runners, gates, and feeders; and flash removal and automation. The chapter also presents the objectives of heat treatment and discusses its processes. The chapter describes product quality control. Quality checks are grouped into three categories: material checks, product checks, and functional checks.

Beryllium-related lung diseases were first reported in the 1930s, several years after the emergence of beryllium metals in manufactured products. Since then, there have been numerous studies around the world and continued refinement of recommendations and safety standards. This chapter provides a summary of the studies that have been conducted along with the findings. It discusses the effects of acute and chronic exposure, toxicity levels, potential sources and risks, treatment, and protective and preventive measures.

This chapter discusses the compositions, properties, and applications of nonferrous metals, including zirconium, hafnium, beryllium, lead, tin, gold, silver, and platinum group metals. It also addresses fusible alloys and provides melting temperatures for several compositions.

This chapter discusses the compatibility problems that arise from chemical or physical interactions between liquefied gases and the common materials used in their production, storage, transportation, distribution, and use. The discussion covers the compatibility of materials with liquid oxygen and liquid fluorine. Hydrogen-environment embrittlement is unique to low-temperature hydrogen systems and is also discussed.

This chapter provides an overview of the state of the art in high-pressure cold spray equipment, including both spray systems and gas supply systems. The chapter describes the commercial cold spray systems developed by companies such as Cold Gas Technology (CGT) GmbH, Plasma Giken Company Ltd, Impact Innovations GmbH, and ASB Industries. Typical helium and nitrogen gas systems used in high-pressure cold spray processing are reviewed.

This chapter discusses the most common causes and contributing factors for external corrosion and stress-corrosion cracking on oil and natural gas pipelines, as well as describes procedures for prevention, mitigation, detection, assessment, and repair. The forms of external corrosion covered include differential cell corrosion, microbiologically influenced corrosion, and stray current corrosion.