Stop-off coatings prevent nitriding of selected areas on components. This chapter discusses the processes, advantages, and disadvantages of stop-off techniques for gas nitriding, salt bath nitriding, and ion nitriding.

This chapter presents a comprehensive coverage of mechanical fastening methods. It begins with a discussion on the advantages and disadvantages of mechanical fastening followed by sections providing information on mechanically fastened joints and the selection of the correct fastener system. The chapter then describes important structural fasteners, namely bolts, screws, pins, collar fasteners, rivets, blind fasteners, machine pins, and spring clip fasteners. The following sections describe the process involved in presses, shrink fits, hole generation, and fastener installation. The chapter ends with information on miscellaneous mechanical fastening methods.

This chapter provides an overview of the basic principles and historic development of metal extrusion processes. It starts by illustrating the two major process categories: direct extrusion and indirect extrusion. It then briefly defines hydrostatic extrusion and the conform process. The history coverage addresses early patents for extrusion of lead at the turn of the 17th century up through the major process innovations in the 20th century.

Gear manufacture depends on machinery available, design specifications or requirements, cost of production, and type of material from which the gear is to be made. This chapter discusses the processes involved in methods for manufacturing gears, namely casting, forming, and forging.

This appendix is a glossary of terms and definitions associated with sheet metal forming.

Tube hydroforming is a material-forming process that uses pressurized fluid to plastically deform tubular materials into desired shapes. It is widely used in the automotive industry for making exhaust manifolds, catalytic converters, shock absorber housings, and other parts. This chapter discusses the basic methods of tube hydroforming and the underlying process mechanics. It explains how to determine if a material is a viable candidate and whether it can withstand preforming or bending operations. It describes critical process parameters, such as interface pressure, surface expansion and contraction, and sliding velocity, and how they influence friction, lubrication, and wear. The chapter also provides information on forming presses and tooling, tube hydropiercing, and the use of finite elements to determine optimal processing conditions and loading paths.

The several specific grades or compositions of tool steels have evolved over time and have been organized into useful groupings. This chapter presents the AISI classification system for tool steels, which categorizes tool steels by their alloying, applications, or heat treatment, and briefly describes the characteristics of each major group. It discusses selection criteria for tool steels, along with examples.

This chapter provides a concise, design-oriented summary of more than 30 sheet forming processes within the categories of bending and flanging, stretch forming, deep drawing, blank preparation, and incremental and hybrid forming. Each summary includes a description and diagram of the process and a bullet-point list identifying relevant equipment, materials, variations, and applications. The chapter also discusses critical process variables, interactions, and components and the classification of sheet metal parts based on geometry.

Forging machines vary based on factors such as the rate at which energy is applied to the workpiece and the means by which it is controlled. Each type has distinct advantages and disadvantages, depending on lot size, workpiece complexity, dimensional tolerances, and the alloy being forged. This chapter covers the most common types of forging machines, explaining how they align with basic forging processes and corresponding force, energy, throughput, and accuracy requirements.

This chapter covers basic machining and assembly operations, with an emphasis on hole preparation for mechanical fasteners. It describes manual, power feed, and automated drilling techniques as well as reaming and countersinking. It discusses various types of fasteners, including rivets, pins, and bolts, along with selection factors and special considerations for composite joints. It also includes information on interference-fit and blind fasteners as well as trimming operations, general assembly considerations, and sealing and painting procedures.

This chapter covers the tribological properties of stainless steel and other corrosion-resistant alloys. It describes the metallurgy and microstructure of the basic types of stainless steel and their suitability for friction and wear applications and in environments where they are subjected to liquid, droplet, and solid particle erosion. It also discusses the tribology of nickel- and cobalt-base alloys as well as titanium, zinc, tin, aluminum, magnesium, beryllium, graphite, and different types of wood.

Optoelectronic components can be readily classified as active light-emitting components (such as semiconductor lasers and light emitting diodes), electrically active but non-emitting components, and inactive components. This chapter focuses on the first category, and particularly on semiconductor lasers. The discussion begins with the basics of semiconductor lasers and the material science behind some causes of device failure. It then covers some of the common failure mechanisms, highlighting the need to identify failures as wearout or maverick failures. The chapter also covers the capabilities of many key optoelectronic failure analysis tools. The final section describes the common steps that should be followed so as to assure product reliability of optoelectronic components.

The die casting process is a widely applied technique used by a variety of industries. This chapter reviews the casting design and engineering requirements for optimizing the characteristics of die castings.

This chapter begins with a description of the requirements of tooling and tooling material for hot extrusion. It covers the processes of designing tool and die sets for direct and indirect extrusion. Next, the chapter provides information on extrusion tooling and die sets for direct external and internal shape production and tools for copper alloy extrusion. Further, it addresses design, calculation, and dimensioning of single-piece and two-part containers and describes induction heating for containers. Information on static- and elastic-based analysis and dimensioning of containers loaded in three dimensions is provided. Examples of calculations for different containers, along with their stresses and dimensions, are presented and the manufacture, operation, and maintenance of containers are described. The chapter further discusses the properties and applications of hot working materials for the manufacture of extrusion tooling and of different extruded materials for the manufacture of extrusion tooling for direct and indirect forming.

Drawing is a bulk deformation process that involves significant surface generation and high pressures. This chapter provides an overview of the mechanics and tribology of wire, bar, tube, and shape drawing. It presents important equations for calculating stresses, forces, friction, heat, strain, and distortion for different tooling configurations and geometries. It explains how to select and apply lubricants based on drawing speed, die design, and other factors and how to maintain sufficient film thickness for hydrodynamic, mixed, and solid-film lubrication conditions. It also discusses the use of vibrating dies, the influence of surface finish and defects, and lubrication practices for specific materials.

Casting is one of the most economical manufacturing processes for providing shape to components of machinery and is used in a wide range of industries. This chapter is a brief account of the advantages, applications, limitations, and market growth of aluminum casting. It also provides information on the process of conversion of steel and iron parts to aluminum.

This chapter describes the processes involved in the fabrication of wrought and cast metal products. It discusses deformation processes including bending and forming, material removal processes such as milling, cutting, and grinding, and joining methods including welding, soldering, and brazing. It also discusses powder consolidation, rolling, drawing and extrusion, and common forging methods.