Search Results for design validation

This chapter is a brief account of various factors pertinent to the development of an engineering component. The discussion covers the disciplines and interactions of design development, engineering of component design, validation of design and process analysis, and matrix of design and manufacturing elements.

This chapter is a detailed account of various factors pertinent to the development and launch of a product. It begins by describing the five phases in the product launch process, namely product design and development, process design and development, product and process validation, product launch, and continuous improvement. This is followed by sections covering product-process flow diagrams and also the process elements considered for process failure mode and effects analysis. Some of the aspects covered by the engineering specifications to meet the product performance requirements are then reviewed. Details on product validation requirements and definitions of parameters related to the launch process are also provided. The chapter discusses the purpose of manufacturing control plan, along with an illustration of a manufacturing control plan outlined for a safety-critical suspension casting. It ends with an overview of the contents of a program launch manual.

Circuit edit has been instrumental to the development of focused ion beam (FIB) systems. FIB tools for advanced circuit edit play a major role in the validation of design and manufacture. This chapter begins with an overview of value, role, and unique capabilities of FIB circuit edit tools for first silicon debug. The etching capabilities of circuit edit FIB tools are then discussed, providing information on chemistry assisted etching in silicon oxides and low-k dielectrics. The chapter also discusses the requirements and procedures involved in edit operation: high aspect ratio milling, endpointing, and cutting copper. It then provides an introduction to FIB metal/conductor deposition and FIB dielectric deposition. Edit design rules that can facilitate prototype production from first silicon are also provided. The chapter concludes with a discussion on future trends in circuit edit technology.

This article presents six case studies of failures with steel forgings. The case studies covered are crankshaft underfill; tube bending; spade bit; trim tear; upset forging; and avoidance of flow through, lap, and crack. The case studies illustrate difficulties encountered in either cold forging or hot forging in terms of preforge factors and/or discontinuities generated by the forging process. Supporting topics that are discussed in the case studies include validity checks for buster and blocker design, lubrication and wear, mechanical surface phenomenon, forging process design, and forging tolerances. Wear, plastic deformation processes, and laws of friction are introduced as a group of subjects that have been considered in the case studies.

This chapter provides an overview of how the disciplines of design, material, and manufacturing contribute to engineering for functional performance. It describes the interaction of product designers and casting engineers in product development. It discusses the consequences of component failure, uncertainty in data and assumptions, and selection of the factor of safety. The chapter also presents an overview of the functional requirements for product performance and provides an overview of product design development. It also presents a partial list of the different tests that are performed on prototypes and examples of product testing. The chapter describes the requirements of a traceability system.

A typical mobile processor die may contain, among other things, a variety of high-performance as well as low-power processing cores along with 5G modems, Wi-Fi modules, image processors, GPUs, and security modules, with a total transistor count exceeding 10 billion. Such designs pose many challenges for yield ramp and diagnostics. This chapter examines these challenges and the growing demand for innovative solutions to help failure analysts quickly and accurately isolate faults. It also assesses the capabilities and future potential of ATPG scan diagnostics, streaming scan networks, and advanced fault models for diagnosing embedded memory.

This article introduces the wafer-level fault localization failure analysis (FA) process flow for an accelerated yield ramp-up of integrated circuits. It discusses the primary design considerations of a fault localization system with an emphasis on complex tester-based applications. The article presents examples that demonstrate the benefits of the enhanced wafer-level FA process. It also introduces the setup of the wafer-level fault localization system. The application of the wafer-level FA process on a 22 nm technology device failing memory test is studied and some common design limitations and their implications are discussed. The article presents a case study and finally introduces a different value-add application flow capitalizing on the wafer-level fault localization system.

This chapter discusses the advantages, limitations, and applications of various aluminum casting processes, namely green sand casting process, air set or no-bake molding process, vacuum molding process, evaporative foam casting process, and die casting process. The processes covered also include gravity permanent molding, low-pressure permanent molding, counter pressure, squeeze casting, investment casting, rapid prototype casting, cast forge hybrid, and semisolid metal processes.

This chapter discusses various factors pertinent to the applications of low-pressure permanent mold casting process, namely decorative automotive wheels, critical safety structural components, and chassis components.

Integrated computational materials engineering (ICME) is a novel approach to design, develop, and deploy materials. This chapter presents ICME and the development of third generation advanced high-strength steels.

This appendix identifies producers, suppliers, and service providers experienced with superalloy materials and applications. It also identifies potential sources of engineering information and property data.

Fracture mechanics is the science of predicting the load-carrying capabilities of cracked structures based on a mathematical description of the stress field surrounding the crack. The fundamental ideas stem from the work of Griffith, who demonstrated that the strain energy released upon crack extension is the driving force for fracture in a cracked material under load. This chapter provides a summary of Griffith’s work and the subsequent development of linear elastic and elastic-plastic fracture mechanics. It includes detailed illustrations and examples, familiarizing readers with the steps involved in determining strain energy release rates, stress intensity factors, J-integrals, R-curves, and crack tip opening displacement parameters. It also covers fracture toughness testing methods and the effect of measurement variables.

Casting quality and consistency need to be carefully controlled. This chapter discusses the procedures that describe the process and product quality controls. In addition, it provides information on quality assurance programs.

This chapter discusses the use of finite-element methods for modeling cold forging processes. The discussion covers process modeling inputs, such as geometric parameters, material properties, and interface conditions, and includes several application examples.

This chapter provides an overview of key elements in controlling the casting process, systems to confirm the quality of outgoing components, and the steps needed to launch a novel product. The discussion also provides information on process control tools and techniques; incoming material control; process control of sand preparation and system maintenance; metallic charge materials; product quality control; and melting, metallurgical, and mechanical testing.

The Nuclear Waste Management Organization (NWMO) investigates approaches for managing Canada's used nuclear fuel. As part of a larger program investigating concepts of copper coatings, NWMO has begun exploring copper cold spray in collaboration with the National Research Council. Within the coating program, a large variety of copper coating sizes have been investigated, from small corrosion coupons to full-scale used-fuel containers/canisters (UFCs). This chapter demonstrates the successful application of copper coating technology to full-scale geometric representative Mark II UFC mock-up configurations through activities involving powder selection, general coating development, UFC coating optimization, and prototyping.

The low-pressure permanent molding (LPPM) and semipermanent molding (LPSPM) processes are versatile, and they meet the quality requirements of a variety of high-integrity, large-sized, and thin-walled aluminum castings for various industries. This chapter presents the major features, operation sequence, advantages, and applications of LPPM, LPSPM, and counter-pressure casting.