This chapter explains various aspects of the foundry process that the design engineer should consider when designing steel castings. It discusses special feeding aids, such as tapers, padding, ribs, and chills that may be used by foundry personnel to promote directional solidification. The chapter addresses the design of castings to reduce the occurrence of internal shrinkage. It provides a detailed discussion on design considerations for molding, cleaning, machining, and function.

This chapter discusses design and certification considerations, including materials and process selection, the building block approach to certification, design allowables, and design guidelines. It also includes information on damage tolerance and environmental sensitivity.

This chapter provides an overview of factors that must be considered in the design of structural components for satisfactory service performance in terms of mechanical behavior of steel castings. The chapter discusses designing against yielding, excessive deflection, and creep and stress rupture. The chapter describes the three main approaches to evaluating and designing structures relative to fatigue resistance: the S-N curve approach for high cycle fatigue, the strain range approach for low cycle fatigue, and the fracture mechanics approach. Two approaches to design against brittle fracture are described, the ductile to brittle transition concept and the fracture mechanics approach. The chapter also discusses several types of corrosion behavior and emphasizes the need to interact with corrosion specialists in the design process. It illustrates the unique advantages that designers may gain by designing components as castings to achieve low stress concentrations economically.

The design process is the first and most important step in corrosion control. Major savings in operating costs are possible by anticipating corrosion problems so as to provide proper design for equipment before assembly or construction begins. This chapter describes the role of the design team in producing a successful final design, general considerations in corrosion-control design, and design details that accelerate corrosion. The details that must be considered when attempting to control corrosion by design include plant/site location, plant environment, component/assembly shape, fluid movement, surface preparation and coating procedures, and compatibility, insulation, and stress considerations. Design solutions for specific forms of corrosion, namely crevice corrosion, galvanic corrosion, erosion-corrosion, and stress-corrosion cracking, are then considered. A brief section is devoted to the discussion on corrosion allowance used for steel parts subject to uniform corrosion. Finally, the chapter describes the design considerations for using weathering steels.

Joining comprises a large number of processes used to assemble individual parts into a larger, more complex component or assembly. The selection of an appropriate design to join parts is based on several considerations related to both the product and the joining process. Many product design departments now improve the ease with which products are assembled by using design for assembly (DFA) techniques, which seek to ensure ease of assembly by developing designs that are easy to assemble. This chapter discusses the general guidelines for DFA and concurrent engineering rules before examining the various joining processes, namely fusion welding, solid-state welding, brazing, soldering, mechanical fastening, and adhesive bonding. In addition, it provides information on several design considerations related to the joining process and selection of the appropriate process for joining.

The detailed heating requirements for specific applications must be considered before construction and implementation of any induction heating process. These requirements may include considerations such as type of heating, throughput and heating time, workpiece material, peak temperature, and so forth. The major applications of induction technology include through heating, surface heating (for surface heat treatment), metal melting, welding, brazing, and soldering. This chapter summarizes the selection of equipment and related design considerations for these applications.

This chapter focuses on various factors to be considered at design stage to minimize corrosion. It begins by providing information on design considerations and general corrosion awareness. This is followed by a description of several factors influencing materials-component failure. Details on design and materials selection, which assist in controlling corrosion, are then provided. The chapter ends with a discussion on the design factors that influence corrosion.

The chapter presents an overview of the properties and operational limits of superconductive materials, as well as techniques used to fabricate practical superconducting wires. It introduces six properties: critical temperature, critical magnetic field, critical current density, stability, ac loss, and mechanical characteristics; for each property, typical data are provided and the experimental methods used to measure it are briefly described. The properties of the superconducting composites are tied together in the chapter to summarize their effect on superconductor material selection and the geometrical design of superconducting composites. The chapter also contains a reference guide to composite-design factors with links to the relevant chapter sections where each design consideration is addressed.

This article introduces the wafer-level fault localization failure analysis (FA) process flow for an accelerated yield ramp-up of integrated circuits. It discusses the primary design considerations of a fault localization system with an emphasis on complex tester-based applications. The article presents examples that demonstrate the benefits of the enhanced wafer-level FA process. It also introduces the setup of the wafer-level fault localization system. The application of the wafer-level FA process on a 22 nm technology device failing memory test is studied and some common design limitations and their implications are discussed. The article presents a case study and finally introduces a different value-add application flow capitalizing on the wafer-level fault localization system.

This chapter familiarizes readers with the design, configuration, and function of tooling and dies used to extrude aluminum alloys. It discuses basic design considerations, including the geometry, location, and orientation of die openings; allowances for thermal shrinkage, stretching, and deflection; and the length and profile of bearing surfaces. It outlines the steps and processes involved in die making, describes the selection and treatment of die materials, and examines the factors that influence friction and wear. It also discusses the general procedures for on-site die correction.

The results of certain heat treating processes must be verified for case quality and case depth by destructively sectioning a part or parts that were subjected to the process. Test coupons or test pins are often used for diffusion processes such as carburizing, carbonitriding, nitriding, and ferritic nitrocarburizing to provide an accurate heat treating process evaluation. This appendix briefly describes the advantages and selection and design considerations of test coupons. A typical example of the use of test pins for monitoring carburizing and hardening of gears is provided.

This chapter covers the failure modes and mechanisms of concern in steam turbines and the methods used to assess remaining component life. It provides a detailed overview of the design considerations, material requirements, damage mechanisms, and remaining-life-assessment methods for the most-failure prone components beginning with rotors and continuing on to casings, blades, nozzles, and high-temperature bolts. The chapter makes extensive use of images, diagrams, data plots, and tables and includes step-by-step instructions where relevant.

This chapter deals with the technology of stainless steel as it pertains to its proper use in architecture, art, and construction. It begins with an overview of the corrosion resistance of stainless steel, providing guidelines for balancing corrosion resistance, processing characteristics, and economy. This is followed by sections describing the influence of surface finish on corrosion resistance of stainless steel and reviewing some of the factors pertinent to balancing service environment, design requirements, and maintenance considerations. The chapter then discusses the various factors pertinent to important considerations in buildings, namely surface finish aesthetics, flatness, maintenance, repair, fabrication, and service considerations. It ends with a section providing information on concrete reinforcing bar.

Coil design for induction heating has been developed and refined over time based on the theoretical principles applied in practice to several simple inductor geometries such as the classical solenoidal coil. This chapter reviews the fundamental considerations in the design of inductors and describes some of the most widely used coils and common design modifications. Specialty coil designs for specific applications are also discussed. The chapter concludes with sections devoted to coil fabrication and design of power-supply leads.

This article describes key processing methods and related design, manufacturing, and application considerations for plastic parts and includes a discussion on materials and process selection methodology for plastics. The discussion covers the primary plastic processing methods and how each process influences part design and the properties of the plastic part. It also includes a brief description of functional requirements in process selection; an overview of various process effects and how they affect the functions and properties of the part; and the selection of processes for size, shape, and design detail factors.

An aircraft was heavily damaged when it was forced to land due to a throttle malfunction. Investigators determined that one of the studs linking the throttle to the engine fractured from fatigue, initiated by cracks formed during a riveting procedure. This chapter provides a summary of the investigation, which included the use of scanning electron fractography, along with recommendations on acceptable hole patterns for rivets.

Because of its speed and ease of control, induction heating can be readily automated and integrated with other processing steps such as forming, quenching, and joining. Completely automated heating/handling/control systems have been developed and are offered by induction equipment manufacturers. This chapter deals with materials handling and automation. First, it summarizes basic considerations such as generic system designs, fixture materials, and special electrical problems to be avoided. Next, it describes and provides examples of materials-handling systems in induction billet heating, bar heating, heat treatment, soldering, brazing, and other induction-based processes. The final section discusses the use of robots for parts handling in induction heating systems.