1-20 of 946 Search Results for

corrosion ratings

Sort by
Series: ASM Technical Books
Publisher: ASM International
Published: 01 December 2015
DOI: 10.31399/asm.tb.cpi2.t55030396
EISBN: 978-1-62708-282-2
... Abstract This chapter contains a corrosion rate conversion table and a figure that shows the relationships among some of the units commonly used for corrosion rates of metals. corrosion rate conversion table metals ...
Series: ASM Technical Books
Publisher: ASM International
Published: 01 July 2000
DOI: 10.31399/asm.tb.fec.t65940233
EISBN: 978-1-62708-302-7
... in an electrolytic solution. It describes how corrosion potentials and current densities are measured and explains how to deal with various sources of error. It also explains how electrochemical impedance measurements are used and describes the underlying theory and procedures in some detail. corrosion rate...
Image
Published: 01 December 2015
Fig. 1 Effect of flow rate, temperature, and oxygen on corrosion rate of steel in saltwater. Source: Ref 16 More
Image
Published: 01 December 2015
Fig. 25 Zones of corrosion for steel in seawater and the relative corrosion rate in each zone. Source: Ref 108 More
Image
Published: 01 November 2007
Fig. 8.23 A corrosion mode where the corrosion rate is diminishing in time and an erosion-corrosion (E-C) mode where the corrosion products are repeatedly removed by impinging particles and reformed subsequently. Source: Ref 34 More
Image
Published: 01 January 2017
Fig. 1.10 Effect of crack depth on crack-tip corrosion rates for nickel with actively corroding crack walls More
Image
Published: 01 March 2001
Fig. 9 Relative corrosion rates of 9Cr-1Mo alloy steel in 5 mol% H 2 S at 3550 kPa (515 psi) for 300 h. Source: Ref 23 More
Image
Published: 01 December 2006
Fig. 2 Average EIS calculated corrosion rate during the period of 5–10 days; tests conducted in low chloride solution at 60 °C (140 °F) Source: Ref 7 More
Image
Published: 01 December 2006
Fig. 13 Corrosion rate as a function of aging time and temperature for alloy C-22 (UNS N06022). (a) Aged wrought alloy in boiling sulfuric acid/ferric sulfate (ASTM G 28 Method A). (b) Gas tungsten arc welded (GTAW) alloy in boiling sulfuric acid/ferric sulfate (ASTM G 28 Method A). (c) Aged More
Image
Published: 01 December 2006
Fig. 14 Corrosion rates for wrought and for gas tungsten arc welded (GTAW) alloy C-22 (UNS N06022). (a) In boiling sulfuric acid/ferric sulfate (ASTM G 28 Method A). (b) In boiling 2.5% HCl solution. Source: Ref 42 More
Image
Published: 01 June 2007
Fig. 2.1 Corrosion rates of iron-chromium alloys in intermittent water spray, at room temperature. Source: Ref 1 More
Image
Published: 01 December 2008
Fig. 18 Corrosion rates in boiling NaOH. Source: Ref 7 More
Image
Published: 01 December 2008
Fig. 19 Corrosion rates in white liquors plus chlorides. Source: Ref 8 More
Image
Published: 01 December 2008
Fig. 22 Corrosion rates for various alloys in 50% acetic plus formic acid, boiling. Source: Ref 10 More
Image
Published: 01 December 2008
Fig. 13 Corrosion rates of stainless versus carbon steel More
Image
Published: 01 December 2008
Fig. 14 Corrosion rates for stainless oil country tubular goods (OCTG) alloys under severe operating conditions More
Image
Published: 01 December 2008
Fig. 1 Influence of chromium on the corrosion rate of steel in environments experienced by oil country tubular goods. Test conditions: synthetic sea water; CO 2 partial pressure, 0.1 MPa; test temperature, 60 (C °140 °F); test duration, 150 h; flow velocity, 2.5 m/s; specific volume, 800 mL More
Image
Published: 01 December 2008
Fig. 2 Influence of copper and nickel on the corrosion rate of martensitic stainless alloys used for oil country tubular goods. Source: Ref 2 More
Image
Published: 01 December 2001
Fig. 11 Corrosion rate versus tungsten content for tantalum-tungsten alloys exposed to concentrated H 2 SO 4 at 180 °C (360 °F) and 210 °C (405 °F) More
Image
Published: 01 December 2001
Fig. 12 Influence of alloying elements on the corrosion rate of binary tantalum alloys exposed 3 days to 95% H 2 SO 4 at 250 °C (480 °F). Source: Ref 9 More