Search Results for corrosion

This appendix is a comprehensive collection of selected sources related to corrosion properties of materials and corrosion testing.

This chapter covers the engineering aspects of corrosion inhibitors and their effect on corrosion reactions. It explains how different metallic salts and heterocyclic compounds influence chemical reactions on metal surfaces exposed to corrosive media or environments. It describes how to evaluate inhibition efficiency through weight loss measurements, linear polarization resistance tests, electrochemical impedance spectroscopy, electrochemical noise monitoring, and surface analysis. It demonstrates the use of potentiodynamic polarization curves, Tafel extrapolations, equivalent circuit models, and various methods for characterizing corrosion damage and protective surface films. It also discusses typical applications, industry trends, and the emerging role of high-throughput experimentation, quantitative modeling, and machine learning in the development of cleaner and more effective corrosion inhibitors.

This chapter discusses the effects of corrosion on boiler tube surfaces exposed to water and steam. It describes the process of corrosion, the formation of scale, and the oxides of iron from which it forms. It addresses the primary types of corrosion found in boiler environments, including general corrosion, under-deposit corrosion, microbially induced corrosion, flow-accelerated corrosion, stress-assisted corrosion, erosion-corrosion, cavitation, oxygen pitting, stress-corrosion cracking, and caustic embrittlement. The discussion is supported by several illustrations and relevant case studies.

Fossil fuels produce many byproducts that, if not fully combusted, put boiler tubes at risk. Fuel ash, chemical residues, and process heat pose the greatest threat and are the primary contributors to fireside corrosion. This chapter covers various types of fireside corrosion such as waterwall, fuel ash, and hot corrosion, acid dew-point or cold-end corrosion, and polythionic acid corrosion. It also addresses stress corrosion cracking and includes relevant case studies.

Irradiation-assisted stress-corrosion cracking (IASCC) has been a topic of engineering interest since it was first reported in the 1960s, having been observed in stainless steel cladding on light water reactor fuel elements. This chapter summarizes the results of decades of investigation, showing that IASCC can essentially be defined as the intergranular cracking of austenitic alloys in high-temperature water, where both the material and its environment have been altered by radiation. Of the many interactions that can occur when metals and water are exposed to radiation, the international consensus is that the three with the greatest impact on crack growth rates are the formation of material defects, radiation-induced segregation, and chemical reactions that increase the corrosion potential of water. The chapter discusses each of these in great detail, and includes information on predictive modeling as well.

This chapter provides an introduction to various forms of corrosion, namely uniform corrosion, localized corrosion, mechanically assisted degradation, environmentally induced cracking, microbiologically influenced corrosion, and metallurgically influenced corrosion.

This chapter discusses some important factors involved in the atmospheric corrosion of engineering materials. The discussion begins with a description of elements necessary for the operation of a galvanic corrosion cell and corrosion reactions, followed by the types of atmospheric corrosion attack. Some of the atmospheric parameters and their effects on the corrosion of several metals are then reviewed. The following sections provide information on air chemistry, principal pollutants inducing corrosion, thermodynamics as well as models for prediction of atmospheric corrosion, and use of Pourbaix diagrams. The phenomenon of precipitation runoff on the corroded metal surface is then discussed. The chapter also describes the role of microbes or bacteria in the corrosion of metals. It concludes by providing information on the trends in atmospheric corrosion research and methods.

This chapter provides a brief account of galvanic corrosion, which occurs when a metal or alloy is electrically coupled to another metal or conducting nonmetal in the same electrolyte. It begins by describing the galvanic series of metals and alloys useful for predicting galvanic relationships, followed by a brief section on polarization of metals or alloys. The effects of area, distance, and geometric shapes on galvanic-corrosion behavior are then discussed. Various alloys susceptible to galvanic corrosion are briefly reviewed. The chapter also discusses various modes of attack that lead to galvanic corrosion, along with methods for predicting and controlling galvanic corrosion.

This chapter is a detailed account of major sources of stray current that can cause corrosion and discusses several ways to prevent damage from stray-current corrosion.

This chapter focuses on resistance characteristics and methods of protecting different forms of high-temperature gaseous corrosion, namely high-temperature oxidation, sulfidation, carburization, hydrogen effects, and hot corrosion.

This chapter concentrates on the better-known and widely studied phenomenon of pitting corrosion of passive metals. The discussion focuses on different parameters that influence pitting corrosion, namely environment, metal composition, potential, temperature, surface condition, and inhibitors. It also provides information on various stages of pitting: passive film breakdown, metastable pitting, pit growth, and pit stifling or death.

This chapter provides a detailed account of crevice corrosion of metals. It begins by describing various critical factors influencing crevice corrosion. This is followed by a section presenting selected examples of crevice corrosion of stainless steel, nickel alloys, aluminum alloys, and titanium alloys in different environments. Methods that have been developed for differentiating and ranking the resistance of alloys toward crevice corrosion are then reviewed. The chapter concludes by discussing various strategies for the prevention of crevice corrosion, namely design awareness, use of inhibitors, and potential control methods.

This chapter focuses on the effects of microscopic organisms and the by-products they produce on the electrochemical corrosion of metals. It begins by considering the characteristics of organisms that allow them to interact with the corrosion processes, the mechanisms by which organisms can influence the occurrence or rate of corrosion, and the types of corrosion most often influenced by microbes. The chapter then discusses the formation of biofilms on the surface of metals. This is followed by a list of industries most often reported as being affected by microbiological corrosion, along with the organisms usually implicated in the attack. The types of attack that have most commonly been documented are illustrated through generalized case histories for different classes of alloys. The chapter also describes the general approaches to be taken to prevent microbiologically influenced corrosion. It ends with some information on the inhibition of corrosion by the action of bacteria.

This chapter is dedicated mostly to the metallurgical effects on the corrosion behavior of corrosion-resistant alloys. It begins with a section describing the importance of alloying elements on the corrosion behavior of nickel alloys. The chapter considers the metallurgical effects of alloy composition for heat-resistant alloys, nickel corrosion-resistant alloys, and nickel-base alloys. This chapter also discusses the corrosion implications of changing the alloy microstructure via solid-state transformation, second-phase precipitation, or cold work. It concludes with a comparison of corrosion behavior between cast and wrought product forms.

This chapter describes the effects of metallurgical variables on the corrosion of aluminum alloys. Emphasis is placed on the effect of constituent particles on pitting corrosion of aluminum.

This chapter is dedicated mostly to the metallurgical effects on the corrosion behavior of corrosion-resistant alloys. It begins with a section describing the importance of alloying elements on the corrosion behavior of nickel alloys. The chapter considers the metallurgical effects of alloy composition for heat-resistant alloys, nickel corrosion-resistant alloys, and nickel-base alloys. This chapter also discusses the corrosion implications of changing the alloy microstructure via solid-state transformation, second-phase precipitation, or cold work. It concludes with a comparison of corrosion behavior between cast and wrought product forms.

This chapter discusses the effects of metallurgical variables on dealloying corrosion. It begins by describing the processes involved in dealloying of metal alloys in aqueous environments. This is followed by a discussion on the morphology of porous dealloyed structures below and above the critical potential. Some features experimentally observed for dealloying systems are then considered. The chapter concludes by briefly reviewing the proposed mechanisms for the formation of porous metals, namely ionization-redeposition mechanism, surface diffusion mechanism, volume diffusion mechanism, and percolation model of selective dissolution.

This chapter describes issues related to corrosion of carbon steel weldments and remedial measures that have proven successful in specific cases. The forms of corrosion covered includes preferential heat affected zone corrosion, preferential weld metal corrosion, and galvanic corrosion. Industrial case studies demonstrating the necessity for testing each galvanic couple in the environment for which it is intended are presented. The chapter also discusses various factors associated with stress-corrosion cracking in oil refineries.

This chapter discusses various factors that affect corrosion of stainless steel weldments. It begins by providing an overview of the metallurgical factors associated with welding. This is followed by a discussion on preferential attack associated with weld metal precipitates in austenitic stainless steels as well as several forms of corrosion associated with welding. The effects of gas-tungsten arc weld shielding gas composition and heat-tint oxides on corrosion resistance are then covered. Microbiological corrosion of butt welds in water tanks is also illustrated. In addition, the chapter provides information on corrosion of ferritic and duplex stainless steel weldments.

This chapter discusses some of the metallurgical factors that affect corrosion of weldments and describes a few considerations for selected nonferrous alloy systems: aluminum, titanium, tantalum, and nickel.