This chapter discusses the composition, properties, and uses of crystalline ceramics, glasses, clay, and concrete mixes. It also discusses the carbon structure of diamond, graphite, fullerenes, and nanotubes.

This article describes in detail the process of corrosion control by cathodic and anodic protection. The discussion covers the basic concept of cathodic and anodic protection systems, their types and equipment used, and the advantages, limitations, and applications of these protection systems. The types of cathodic protection systems include sacrificial cathodic protection and impressed-current cathodic protection systems. Some of the technical problems associated with cathodic protection include the effects of stray currents on the corrosion of adjacent metal structures, the effects of the chemical reactions occurring at the surface of the protected structure, and the effects of cathodic protection on coatings.

Sand and metallic charge materials are two essential and heavy raw materials that are needed for molding and casting. This chapter focuses on planning and provision for storage and handling of the raw materials needed for casting manufacturing. The major raw materials used for molding and casting are metallic charge materials and nonmetallic materials. The chapter also presents the advantages, limitations, and applications of drum or rotary dryers (also known as rotary kiln dryers) and fluidized bed dryers (also known as vibration fluidized bed dryers).

This chapter covers the engineering aspects of corrosion inhibitors and their effect on corrosion reactions. It explains how different metallic salts and heterocyclic compounds influence chemical reactions on metal surfaces exposed to corrosive media or environments. It describes how to evaluate inhibition efficiency through weight loss measurements, linear polarization resistance tests, electrochemical impedance spectroscopy, electrochemical noise monitoring, and surface analysis. It demonstrates the use of potentiodynamic polarization curves, Tafel extrapolations, equivalent circuit models, and various methods for characterizing corrosion damage and protective surface films. It also discusses typical applications, industry trends, and the emerging role of high-throughput experimentation, quantitative modeling, and machine learning in the development of cleaner and more effective corrosion inhibitors.

This chapter discusses recycling processes used for metals, plastics, rubber, glass, and paper. Is also describes the advantages of recycled materials.

This chapter provides a detailed account of cathodic protection. It begins by discussing the fundamentals of cathodic protection followed by a description of the various types of cathodic protection. It then describes the origins, types, and alleged failures of cathodic protection criteria. This is followed by a section providing information on anode materials that are used for cathodic protection applications. General guidelines for designing the cathodic protection systems are also listed. Finally, the chapter presents various examples on cathodic protection of steel structures. The examples are selected to familiarize the design engineer with the steps to follow in selecting a specific corrosion-control method.

This chapter provides a brief account of galvanic corrosion, which occurs when a metal or alloy is electrically coupled to another metal or conducting nonmetal in the same electrolyte. It begins by describing the galvanic series of metals and alloys useful for predicting galvanic relationships, followed by a brief section on polarization of metals or alloys. The effects of area, distance, and geometric shapes on galvanic-corrosion behavior are then discussed. Various alloys susceptible to galvanic corrosion are briefly reviewed. The chapter also discusses various modes of attack that lead to galvanic corrosion, along with methods for predicting and controlling galvanic corrosion.

This chapter discusses the properties and compositions of steels used in pressure vessels, piping, boilers, rebar, and other structural applications. It covers fine-grained steels, quenched and tempered steels, and controlled rolled (thermomechanical treatment) steels. It also compares and contrasts steels used for concrete reinforcement and in various types of pressure vessels, and presents a metallographic study of the effects of welding on the micro and macrostructure of steel.

Corrosion can be defined as a chemical or electrochemical reaction between a material and its environment that causes the material and its properties to degrade. In most cases, it refers to the electrochemical oxidation of metals accompanied by the production of oxides or salts of the base material. This chapter discusses the process of corrosion and how to prevent or mitigate its effects. It describes several forms of corrosion, including uniform, intergranular, pitting, crevice, and stray-current corrosion, and the effects of stress-corrosion cracking, corrosion fatigue, and selective leaching. It discusses the use of corrosion inhibitors, cathodic and anodic protection, pH control, and Pourbaix diagrams.

The design process is the first and most important step in corrosion control. Major savings in operating costs are possible by anticipating corrosion problems so as to provide proper design for equipment before assembly or construction begins. This chapter describes the role of the design team in producing a successful final design, general considerations in corrosion-control design, and design details that accelerate corrosion. The details that must be considered when attempting to control corrosion by design include plant/site location, plant environment, component/assembly shape, fluid movement, surface preparation and coating procedures, and compatibility, insulation, and stress considerations. Design solutions for specific forms of corrosion, namely crevice corrosion, galvanic corrosion, erosion-corrosion, and stress-corrosion cracking, are then considered. A brief section is devoted to the discussion on corrosion allowance used for steel parts subject to uniform corrosion. Finally, the chapter describes the design considerations for using weathering steels.

This chapter assesses the state of 3D printing among automakers, medical device manufacturers, and construction companies.

Organic coatings (paints and plastic or rubber linings), metallic coatings, and nonmetallic inorganic coatings (conversion coatings, cements, ceramics, and glasses) are used in applications requiring corrosion protection. These coatings and linings may protect substrates by three basic mechanisms: barrier protection, chemical inhibition, and galvanic (sacrificial) protection. This chapter begins with a section on organic coating and linings, providing a detailed account of the steps involved in the coating process, namely, design and selection, surface preparation, application, and inspection and quality assurance. The next section discusses the methods by which metals, and in some cases their alloys, can be applied to almost all other metals and alloys: electroplating, electroless plating, hot dipping, thermal spraying, cladding, pack cementation, vapor deposition, ion implantation, and laser processing. The last section focuses on nonmetallic inorganic coatings including ceramic coating materials, conversion coatings, and anodized coatings.

This chapter is intended to identify materials, processes, and designs that will lead to great advances in powder-binder forming technologies. It discusses some of the structures obtained through these advances in powder-binder technologies such as binder jetting and extrusion-based additive manufacturing, including bound-metal deposition and fused-filament fabrication: oxidation-resistant high-temperature alloys, anisotropic structures, submicrometer-scale structures, surface hard materials, and artist metallic clays. Some of the advances discussed include the developments in process involving plastics, emulsions, ceramics, and porous structures and foams. Improvements in the design processes have led to the development of functional structures, controlled porosity, and bioinspired structures.

This chapter covers common types of erosion, including droplet, slurry, cavitation, liquid impingement, gas flow, and solid particle erosion, and major types of wear, including abrasive, adhesive, lubricated, rolling, and impact wear. It also covers special cases such as galling, fretting, scuffing, and spalling and introduces the concepts of tribocorrosion and biotribology.

This chapter addresses the hardware requirements for filament winding, from elementary processing equipment to more advanced systems. The chapter describes the equipment, defines how it is best used, and presents real-life examples. It describes a helical horizontal filament winding machine system and a vertical winding machine. The chapter provides information on in-plane (polar) winders and several types of creels, namely stationary and no twist, rotating, braking, and combinations thereof. Comprehensive descriptions of mandrel designs used in filament winding are presented in text and illustration. The chapter also reviews process control of filament winding parameters, including for some specialized winding processes and unique component types.

This chapter concerns itself with the tribology of ceramics, cermets, and cemented carbides. It begins by describing the composition and friction and wear behaviors of aluminum oxide, silicon carbide, silicon nitride, and zirconia. It then compares and contrasts the microstructure, properties, and relative merits of cermets with those of cemented carbides.

This chapter is an account of the various events that led to the decline of the integrated steel industry during the 1950s. These include the steel strike of 1959, the improvements in technology and increase in imports since 1950s, widespread closures of steel companies, the decline of the minimill industry, and the rapid growth of Mittal Steel.

Corrosive environments can be broadly classified as atmospheric, underground/soil, water, acidic, alkaline, and combinations of these. Complicating matters is the fact that there are important variables, for example, pH, temperature, and the presence of biological organisms, that can significantly alter the response of the material in a given environment. This chapter provides a detailed account of all these types of corrosion affecting various industries, pointing out the connection between the characteristics of the corrosive environment that control corrosion behavior, the corrosion characteristics of various metals and materials systems, and the subsequent corrosion response.

All materials are susceptible to corrosion or some form of environmental degradation. Although no single material is suitable for all applications, usually there are a variety of materials that will perform satisfactorily in a given environment. The intent of this chapter is to review the corrosion behavior of the major classes of metals and alloys as well as some nonmetallic materials, describe typical corrosion applications, and present some unique weaknesses of various types of materials. It also aims to point out some unique material characteristics that may be important in material selection, and discuss, where appropriate, the characteristic forms of corrosion that attack specific materials. The materials addressed in this chapter include carbon steels, weathering steels, and alloy steels; nickel, copper, aluminum, titanium, lead, magnesium, tin, zirconium, tantalum, niobium, and cobalt and their alloys; polymers; and other nonmetallic materials, including rubber, carbon and graphite, and woods.