Search Results for coal-fired power plants

This chapter provides an outline of the failure modes and mechanisms associated with most boiler tube failures in coal-fired power plants. Primary categories include stress rupture failures, water-side corrosion, fire-side corrosion, fire-side erosion, fatigue, operation failures, and insufficient quality control.

Coal-based thermal power plants play a major role in the welfare of many nations and the overall global economy. This chapter describes the basic equipment requirements and operating principles of thermal power plants, particularly subcritical, supercritical, and ultra-supercritical types.

Increasing the efficiency of power plants by operating at higher temperatures and pressures and adding a double-reheat feature comes at the expense of shortened lifetimes for critical components. This chapter provides an overview of the material-related problems associated with advanced steam plants and their respective solutions. The discussion covers the selection of materials on a component-specific basis for boilers as well as steam turbines.

Boilers are engineered systems designed to convert the chemical energy in fuel into heat to generate hot water or steam. This chapter describes boiler applications and types, including firetube boilers, watertube boilers, electric boilers, packaged boilers, fluidized bed combustion boilers, oil- and gas-fired boilers, waste heat boilers, and black liquor recovery boilers. It also describes the operation and working principle of utility or power plant boilers, covering conventional subcritical and advanced supercritical types.

Boilers are often classified based on the maximum operating temperature and pressure for which they are designed. Classifications, in ascending order, are subcritical, supercritical, ultra-supercritical, and to advanced ultra-supercritical. At each higher operating point comes greater efficiency, as well as greater demand on construction materials. This chapter discusses the primary requirements for boiler tube materials, including oxidation and corrosion resistance, fatigue strength, thermal conductivity, and the ability to resist creep and rupture. It also provides information on various steels and alloys, covering cost, engineering specifications, and ease of use.

The power generating industry has become proficient at predicting how long a component will last under a given set of operating conditions. This chapter explains how such predictions are made in the case of boiler tubes. It identifies critical damage mechanisms, progressive failure pathways, and relevant test and measurement procedures. It describes life assessment methods based on hardness, wall thickness, scale formation, microstructure, and creep. It also includes a case study on the determination of the residual life of a secondary superheater tube.

Combustion byproducts such as soot, ash, and abrasive particulates can inflict significant damage to boiler tubes through the cumulative effect of erosion. This chapter examines the types of erosion that occur on the fire side of boiler components and the associated causes. It discusses the erosive effect of blowing soot, steam, and fly ash as well as coal particle impingement and falling slag. It also includes several case studies.

This chapter discusses material-related problems associated with coal-fired burners. It explains how high temperatures affect heat-absorbing surfaces in furnace combustion areas and in the convection pass of superheaters and reheaters. It describes how low-NOx combustion technology, intended to reduce NOx emissions, accelerates tube wall wastage. It also covers circumferential cracking in furnace waterwalls, thermal fatigue cracking induced by waterlances and water cannons, superheater-reheater corrosion, and erosion in fluidized-bed boilers.

Fossil fuels produce many byproducts that, if not fully combusted, put boiler tubes at risk. Fuel ash, chemical residues, and process heat pose the greatest threat and are the primary contributors to fireside corrosion. This chapter covers various types of fireside corrosion such as waterwall, fuel ash, and hot corrosion, acid dew-point or cold-end corrosion, and polythionic acid corrosion. It also addresses stress corrosion cracking and includes relevant case studies.

The ability to accurately assess the remaining life of components is essential to the operation of plants and equipment, particularly those in service beyond their design life. This, in turn, requires a knowledge of material failure modes and a proficiency for predicting the near and long term effects of mechanical, chemical, and thermal stressors. This chapter presents a broad overview of the types of damage to which materials are exposed at high temperatures and the approaches used to estimate remaining service life. It explains how operating conditions in power plants and oil refineries can cause material-related problems such as embrittlement, creep, thermal fatigue, hot corrosion, and oxidation. It also discusses the factors and considerations involved in determining design life, defining failure criteria, and implementing remaining-life-assessment procedures.

A large portion of cast and wrought product production is directed to the ground transportation market. Aluminum castings, extrusions, forgings, and rolled products all find wide application for trucks, trains, subways, and buses and are discussed in this chapter.

Carbon and low-alloy steels in high-temperature service are vulnerable to the effects of hydrogen attack, which include severe loss in tensile and rupture strengths as well as ductility. As the chapter explains, when steel is in contact with hydrogen molecules at elevated temperatures, hydrogen atoms can be absorbed at the surface and then diffuse into the metal. Hydrogen atoms in the metal then react with iron carbide forming methane gas which can accumulate at grain boundaries and other interfaces. The chapter describes two applications, one in coal-fired boilers, the other in petroleum refining, where hydrogen attack was observed. It documents the extent of the damage in each case and identifies the source of the hydrogen.

This chapter covers the failure modes and mechanisms associated with boiler components and the tools and techniques used to assess damages and predict remaining component life. It begins with a review of the design and operation of a utility boiler and the materials used in construction. It then describes the various causes of failure in boiler tubes, headers, and steam pipes, explaining how and why they occur, how they are diagnosed, and how to mitigate their effects. The final and by far largest section in the chapter is a tutorial on damage and life assessment techniques for boiler components and assemblies. It demonstrates the use of various methods, including analytical techniques that estimate life expenditure based on operating history, component geometry, and material properties; predictive methods based on the extrapolation of failure statistics; methods that predict life based on dimensional measurements; methods based on metallographic studies; methods based on temperature estimates; and a method for estimating remaining life under creep conditions based on stress-rupture testing of service-exposed material samples. The chapter also discusses the use of fracture mechanics and presents a number of cases in which life assessments are made based on the integration of several methods.

This chapter is a chronological account of the development of ironmaking in colonial America from 1645 to 1870. The discussion covers the spread of ironmaking in many of the colonies in the northeast, canal building in Pennsylvania, the replacement of charcoal by anthracite coal in ironmaking, the life of ironmaking pioneer John Fritz, and the rapid increase in ironmaking for the railroads.

This chapter discusses the erosion and erosion-corrosion behaviors of metals and alloys. It includes data primarily related to particle-laden gas streams impacting on the metal surface. It also covers properties and applications and provides guidelines for materials selection.

Fireside corrosion can be a serious problem in oil-fired boilers and in refinery furnaces fired with low-grade fuels. This chapter provides an overview of fireside or oil-ash corrosion and the problems it can cause in utility power boilers and petrochemical refinery furnaces. It explains how oil-ash corrosion affects waterwalls, superheaters, and reheaters as well as metal tube supports and hangers.

This chapter addresses the implications for increased aluminum usage on major issues such as climate change and solid waste management. The chapter also considers three approaches for decarbonizing aluminum-product production.