Fossil fuels produce many byproducts that, if not fully combusted, put boiler tubes at risk. Fuel ash, chemical residues, and process heat pose the greatest threat and are the primary contributors to fireside corrosion. This chapter covers various types of fireside corrosion such as waterwall, fuel ash, and hot corrosion, acid dew-point or cold-end corrosion, and polythionic acid corrosion. It also addresses stress corrosion cracking and includes relevant case studies.

Residual, or locked-in internal, stresses are regions of misfit within a metal part or assembly that can cause distortion and fracture just as can the more obvious applied, or service, stresses. This chapter describes the fundamental facts about residual stresses and discusses the basic mechanisms of residual stress formation: thermal, transformational, mechanical, and chemical.

This chapter describes the characteristic damage of a mid-air explosion and how it appears in metal debris recovered from crash sites of downed aircraft. It explains that explosive forces produce telltale signs such as petaling, curling, spalling, spikes, reverse slant fractures, and metal deposits. Explosive forces can also cause ductile metals such as aluminum to disintegrate into tiny pieces and are associated with chemicals that leave residues along with numerous craters on metal surfaces. The chapter provides examples of the different types of damage as revealed in the investigation of two in-flight bombings.

This chapter describes the molecular structures and chemical reactions associated with the production of thermoset and thermoplastic components. It compares and contrasts the mechanical properties of engineering plastics with those of metals, and explains how fillers and reinforcements affect impact and tensile strength, shrinkage, thermal expansion, and thermal conductivity. It examines the relationship between tensile modulus and temperature, provides thermal property data for selected plastics, and discusses the effect of chemical exposure, operating temperature, and residual stress. The chapter also includes a section on the uses of thermoplastic and thermosetting resins and provides information on fabrication processes and fastening and joining methods.

This chapter discusses the effects of metallurgical factors on the corrosion resistance of magnesium alloys. The factors are chemical composition, heat treating, grain size, and cold-work effects. The chapter describes the causes of corrosion failures in magnesium alloys, namely heavy-metal contamination, blast residues, flux inclusions, and galvanic attack.

Steels contain a wide range of elements, including alloys as well as residual processing impurities. This chapter describes the chemical composition of low-alloy AISI steels, which are classified based on the amounts of chromium, molybdenum, and nickel they contain. It explains why manganese is sometimes added to steel and how unintended consequences, such as the development of sulfide stringers, can offset the benefits. It also examines the effect of alloying elements on the iron-carbon phase diagram, particularly their effect on transformation temperatures.

This chapter discusses the key findings of an investigation into the failure of an aircraft engine fuel pump. It explains how investigators came to the conclusion that metal slivers from a heavily worn spring may have interrupted the flow of lubricant to one of the slipper pads, causing adhesive wear and the welding of slipper pad material onto the surface of a mating cam plate. Excessive friction between the slipper pads and cam plate, in turn, created a torsional overload that caused the camshaft to break. The chapter presents SEM images showing the wear pattern on one of the springs along with photographs of the damaged slipper pads and cam plate. It also includes an image of a copper flake found in one of the pistons and discusses the results of qualitative x-ray chemical analysis.

This chapter discusses the engineering significance of steel and briefly describes its chemical composition, crystal structure, Fe-C phases, and associated characterization techniques.

This chapter discusses the factors influencing the corrosion resistance of bulk materials, namely alloying, metallurgical factors, and mechanical treatments.

The metallurgy of aluminum and its alloys offers a range of opportunities for employing heat treatments to obtain desirable combinations of mechanical and physical properties such that castings meet defined temper requirements. This chapter discusses the processes involved in solution heat treatment, quenching, precipitation hardening, and annealing of aluminum alloys. The effects of these processes on dimensional stability and residual stresses are also discussed. Troubleshooting and diagnosis of heat treating problems are covered in the concluding section of the chapter.

The orientation of the devices within a package determine the best chosen approach for access to a select component embedded in epoxy both in package or System in Package and multi-chip module (MCM). This article assists the analyst in making decisions on frontside access using flat lapping, chemical decapsulation, laser ablation, plasma reactive ion etching (RIE), CNC based milling and polishing, or a combination of these coupled with optical or electrical endpoint means. This article discusses the general characteristics, advantages, and disadvantages of each of these techniques. It also presents a case study illustrating the application of CNC milling to isolate MCM leakage failure.

Temperature and deformation gradients developed in the course of manufacturing can have undesired effects on the microstructures along their path; the two most common being residual stress and distortion. This chapter discusses these manufacturing-related problems and how they can be minimized by heat treatments. It also provides information on residual stress evaluation and prediction techniques.

Superalloys are susceptible to damage from a variety of surface contaminants. They may also require special surface finishes for subsequent processing steps such as coating applications. This chapter describes some of the cleaning and finishing procedures that have been developed for superalloys and how they work. It discusses the effect of metallic contaminants, tarnish, oxide, and scale and how they can be detected and removed. It also discusses chemical and mechanical surface finishing techniques and where they are used, and presents several application examples.

Materials used in joining, whether solders, fluxes, or atmospheres, are becoming increasingly subjected to restrictions on the grounds of health, safety, and pollution concerns. These regulations can limit the choice of materials and processes that are deemed acceptable for industrial use. The chapter addresses this issue with a focus on soldering fluxes. The chapter also describes factors related to soldering under a protective atmosphere, provides information on chemical fluxes for soldering of various metals, and discusses the processes involved in fluxless soldering processes.

This chapter discusses joining atmospheres that are used for brazing, along with their advantages and disadvantages. It discusses the processes, advantages, and disadvantages of chemical fluxing, self-fluxing, and fluxless brazing. Information on stop-off compounds that are considered as the antithesis of fluxes is also provided.

This chapter briefly outlines some of the basic aspects of failure analysis, describing some of the basic steps and major concerns in conducting a failure analysis. A brief review of failure types from fracture, distortion, wear-assisted failure, and environmentally assisted failure (corrosion) is also provided.

This chapter provides an overview of the fundamental material- and process-related parameters of quenching on residual stress, distortion control, and cracking. It begins with a description of phase transformations during heating and quenching of steel. This is followed by a section on the effects of materials and quench process design on distortion of steel during heat treating. Details on stress raisers and their role in quench cracking are then presented. The chapter ends with various selected case histories of failures attributed to the quenching process.

This article reviews the fundamental and specific factors that control the properties of steel weldments in both the weld metal and heat-affected zone (HAZ). The influence of welding processes, welding consumables, and welding parameters on the weldment properties is emphasized. The service properties of weldments in corrosive environments are considered and subjected to cyclic loading. The article summarizes the effects of major alloying elements in carbon and low-alloy steels on HAZ microstructure and toughness. It discusses the processes involved in controlling toughness in the HAZ and the selection of the proper filler metal. The article provides a comparison between single-pass and multipass welding and describes the effect of welding procedures on weldment properties and the effects of residual stresses on the service behavior of welded structures. It also describes the fatigue strength and fracture toughness of welded structures. The article reviews various types of corrosion of weldments.