1-20 of 2180 Search Results for

cast steels

Sort by
Image
Published: 01 August 1999
Fig. 6.14 (Part 1) As-cast structures of cast steels. (a) to (d) 0.4% C alloy steel (0.41C-0.66Mn-0.35Si-0.012S-0.010P-1.88Ni-0.95Cr-0.28Mo, wt%). (a) As cast. Section parallel to dendritic growth direction. Hydrochloric acid (hot 50%). 15×. (b) Same area as (a). Phosphorus More
Image
Published: 01 August 1999
Fig. 6.15 (Part 1) Effect of heat treatment on cast steels. (a) to (f) 0.25%C-1.2%Mn (0.23C-0.47Si-1.16Mn, wt%). (a) As cast. 155 HV. Picral. 50×. (b) Austenitized at 850 °C for 1 h, then cooled at 250 °C/h; approximately air cooled (normalized). 155 HV. Picral. 50×. (c) Austenitized More
Image
Published: 01 August 1999
Fig. 6.16 (Part 1) Effect of heat treatment on 0.2% C cast steels. 0.19C-0.51Si-0.56Mn (wt%). (a) As cast. 170 HV. Oberhoffer. 20×. (b) As cast. 170 HV. Picral. 50×. (c) Austenitized at 850 °C for 1 h; cooled at 15 °C/min (annealed). 150 HV. Picral. 50×. (d) Austenitized at 850 °C More
Image
Published: 01 August 1999
Fig. 6.17 (Part 1) Manganese sulfide inclusions in cast steels. (a) and (b) 0.15% C (0.14C-0.29Si-0.31Mn-0.001 Al, wt%). As cast; incompletely deoxidized with silicon alone. Etchant: nil. (a) 200×. (b) Scanning electron micrograph of fracture surface. 500×. (c) 0.15% C (0.13C-0.22Si More
Image
Published: 01 December 1995
Fig. 16-7 Distribution of tensile test properties for alloy cast steels heat treated to a Brinell hardness range of 270-321 [120 ksi (827 MPa) minimum tensile strength]. 260 heats More
Image
Published: 01 December 1995
Fig. 18-12 Hardness vs. tensile strength of low alloy cast steels regardless of heat treatment ( 6 ) More
Image
Published: 01 December 1995
Fig. 18-23 Distribution of endurance ratio for various section sizes of cast steels More
Image
Published: 01 December 1995
Fig. 19-6 Tempering curves for two cast steels More
Image
Published: 01 December 1995
Fig. 24-26 Hardenability curves for C, Mn-B, Ni-Cr-Mo, and Cr-Mo cast steels More
Image
Published: 01 December 1995
Fig. 24-27 Hardenability curves for carbon cast steels More
Image
Published: 01 December 1995
Fig. 24-28 Hardenability curves for carbon cast steels More
Image
Published: 01 December 1995
Fig. 24-37 End-quench hardenability of chromium (5130) cast steels More
Image
Published: 01 December 1995
Fig. 24-38 End-quench hardenability of manganese-molybdenum (8400) series cast steels More
Image
Published: 01 December 1995
Fig. 26-2 Relative machinability vs. hardness for several cast steels using carbide tools More
Image
Published: 01 December 1995
Fig. 27-25 Magnetization curves for higher strength magnetically soft cast steels ( 21 ). The composition and heat treatment of these steels are listed in Table 27-20 . More
Image
Published: 01 December 1995
Fig. 27-26 Magnetization curves for higher strength magnetically soft cast steels ( 21 ). The composition and heat treatment of these steels are listed in Table 27-20 . More
Image
Published: 01 December 1995
Fig. 27-27 Magnetization curves for higher strength magnetically soft cast steels ( 21 ). The composition and heat treatment of these steels are listed in Table 27-20 . More
Series: ASM Technical Books
Publisher: ASM International
Published: 01 March 2002
DOI: 10.31399/asm.tb.mgppis.t60400001
EISBN: 978-1-62708-258-7
... Abstract This chapter introduces the metallographer to the various types of steels and cast irons and explains how they are classified and defined. Classification and designation details are provided for plain carbon steels, alloy steels, and gray, white, ductile, and malleable cast irons...
Series: ASM Technical Books
Publisher: ASM International
Published: 01 December 1995
DOI: 10.31399/asm.tb.sch6.t68200048
EISBN: 978-1-62708-354-6
... Abstract Casting is one of the basic processes used for the shaping of steel. It is economical in both cost and time of production. Numerous components are produced from cast steel because of the advantages of the process. These advantages can best be described under the following headings...
Series: ASM Technical Books
Publisher: ASM International
Published: 01 December 1995
DOI: 10.31399/asm.tb.sch6.t68200001
EISBN: 978-1-62708-354-6
... Abstract This chapter defines steel castings, explains when to use steel castings, gives an overview of casting processes, and gives examples of suitable applications for cast steel parts. steel castings near net shape Opening image for Chapter 1, “Introduction to Steel Castings...