1-20 of 611 Search Results for

bend testing

Sort by
Image
Published: 01 January 2017
Fig. 13.7 Time to failure of amorphous Fe-40Ni-20B alloy measured by bend testing in 0.39 M FeCl 3 at 30 °C (86 °F) as a function of applied strain (ε). Reprinted from Ref 13.16 with permission More
Image
Published: 01 January 2017
Fig. 13.8 Time to failure of amorphous Fe-40Ni-20B alloy measured by bend testing in 1 M HCl at 30 °C (86 °F) as a function of potential. Initial strain: ε = 0.0056. Reprinted from Ref 13.16 with permission More
Image
Published: 01 August 2005
Fig. 2.30 Cleavage fracture from bend testing of 201 nickel in hydrogen atmosphere. (a) Ledgelike character of cleavage facets with small tongues on the bright facet (SEM, original magnification at 2000×). (b) Lower magnification view (original magnification at 500×) with higher-magnification More
Image
Published: 01 January 1998
Fig. 9-15 Effect of tempering temperature on properties determined by bend testing of S1 steel specimens, containing 0.50% C, 1.98% W, 1.68% Cr, and 0.24% V, oil quenched from 900 °C (1650 °F) and tempered for 2 h at the temperatures shown. Source: Ref 13 More
Image
Published: 01 January 1998
Fig. 10-13 Maximum fiber stress and maximum deflection obtained in bend testing samples of O1 tool steel containing 1.2% Mn as a function of tempering temperature. Hardness values are noted along the abscissa. Data from Teledyne VASCO More
Image
Published: 01 August 2012
Fig. 2.25 Schematics of stretch bending tests. (a) Stretch forming test. Source: Ref 2.17 . (b) Stretch bending test. Source: Ref 2.18 . (c) Stretch bend test. Source: Ref 2.19 . (d) Tangential stretch bending More
Image
Published: 01 December 2003
Fig. 15 Constant-strain (three-point bending) test for glassy plastics. W , applied load; L , span; t, thickness. Source: Ref 47 More
Image
Published: 01 September 2008
Fig. 14 Plot of static bending test of carbonitrided 18HGT-grade specimen More
Image
Published: 01 September 2008
Fig. 12 Side-bend test failure of weld More
Image
Published: 01 January 2017
Fig. 17.26 (a) Proportional dimensions and tolerances for cantilever bend test specimens. Width = W ; thickness ( B ) = 0.5 W ; half loading span ( L ) = 2 W ; notch width ( N ) = 0.065 W maximum if W > 25 mm (1.0 in.); N = 1.5 mm (0.06 in.) maximum if W ≤ 25 mm (1.0 in.); effective More
Image
Published: 01 November 2007
Fig. 12.10 Comparison of bend test fracture strengths for a quenched and tempered (Q & T) steel and two mixed martensite-bainite structures in a 0.9% C steel More
Image
Published: 01 August 2012
Fig. 4.26 Bendability of several steels under the three-point bending test ( Ref 4.26 ) More
Image
Published: 01 August 2012
Fig. 4.27 Schematic of the stretch bend test More
Image
Published: 01 August 2012
Fig. 2.23 Schematics of (a) an air bending test fixture, used to determine bendability, and (b) the bending angle measurement. Source: Ref 2.15 More
Image
Published: 01 August 2012
Fig. 6.12 Bendability of advanced high-strength steels in three-point bending test. Source: Ref 6.3 More
Image
Published: 01 January 1998
Fig. 10-14 Effect of tempering on the double-point bend test properties of O7 tool steel. Specimens were oil quenched from 870 °C (1600 °F) and tempered for 2 h at various temperatures. Source: Ref 6 More
Image
Published: 30 June 2023
Fig. 10.7 Three-point bend test at time of completion More
Image
Published: 01 November 2012
Fig. 28 Test fixtures for the K Ic test specimens. (a) Fixtures for the bend test. (b) Clevises for the compact specimen. Source: Ref 12 More
Series: ASM Technical Books
Publisher: ASM International
Published: 01 December 1995
DOI: 10.31399/asm.tb.sch6.t68200144
EISBN: 978-1-62708-354-6
... Abstract Parts of machines and equipment that have previously been designed as wrought or fabricated parts, or as cast parts of metals other than steel, are often reconsidered as steel castings. This chapter presents bending test data for several junction designs of L and box sections...
Image
Published: 01 September 2008
Fig. 16 (a) Bend strength and fracture energy (energy necessary to fracture the specimen) obtained in a static bend test. Four-point bend test with specimens of 5 mm (thickness) per 7 mm (width) cross section. Tested material is an 8% Cr cold work steel (brand name VF800AT, Ref 13 ), heat More