Search Results for Wastewater vaporizers

Ferritic stainless steels are essentially iron-chromium alloys with body-centered cubic crystal structures. Chromium content is usually in the range of 11 to 30%. The primary advantage of the ferritic stainless steels, and in particular the high-chromium, high-molybdenum grades, is their excellent stress-corrosion cracking resistance and good resistance to pitting and crevice corrosion in chloride environments. This chapter provides information on the classifications, properties, and general welding considerations of ferritic stainless steels. The emphasis is placed on intergranular corrosion, which is the most common cause of failure in ferritic stainless steel weldments. Two case histories involving intergranular corrosion failures of ferritic stainless steel weldments are included. A brief discussion on hydrogen embrittlement is also provided.

This chapter discusses various factors that affect corrosion of stainless steel weldments. It begins by providing an overview of the metallurgical factors associated with welding. This is followed by a discussion on preferential attack associated with weld metal precipitates in austenitic stainless steels as well as several forms of corrosion associated with welding. The effects of gas-tungsten arc weld shielding gas composition and heat-tint oxides on corrosion resistance are then covered. Microbiological corrosion of butt welds in water tanks is also illustrated. In addition, the chapter provides information on corrosion of ferritic and duplex stainless steel weldments.

Organic coatings (paints and plastic or rubber linings), metallic coatings, and nonmetallic inorganic coatings (conversion coatings, cements, ceramics, and glasses) are used in applications requiring corrosion protection. These coatings and linings may protect substrates by three basic mechanisms: barrier protection, chemical inhibition, and galvanic (sacrificial) protection. This chapter begins with a section on organic coating and linings, providing a detailed account of the steps involved in the coating process, namely, design and selection, surface preparation, application, and inspection and quality assurance. The next section discusses the methods by which metals, and in some cases their alloys, can be applied to almost all other metals and alloys: electroplating, electroless plating, hot dipping, thermal spraying, cladding, pack cementation, vapor deposition, ion implantation, and laser processing. The last section focuses on nonmetallic inorganic coatings including ceramic coating materials, conversion coatings, and anodized coatings.

This chapter provides practical information on surface treatments that work by altering the surface chemistry of metals and alloys. It discusses the use of phosphate and chromate conversion coatings as well as anodizing, steam oxidation, diffusion coatings, and pack cementation. The chapter also covers ion implantation and laser alloying.

This chapter explores case studies on using induction heating for joining applications, encompassing both soldering and brazing to demonstrate versatility. Each study focuses on inductor coil design, workpiece geometry, and production quantities, emphasizing optimization due to the interplay between material geometry, coil configuration, and process parameters like generator frequency and power. The case studies provide real-world data on effectively implementing induction heating in joining processes.

This chapter focuses on the effects of microscopic organisms and the by-products they produce on the electrochemical corrosion of metals. It begins by considering the characteristics of organisms that allow them to interact with the corrosion processes, the mechanisms by which organisms can influence the occurrence or rate of corrosion, and the types of corrosion most often influenced by microbes. The chapter then discusses the formation of biofilms on the surface of metals. This is followed by a list of industries most often reported as being affected by microbiological corrosion, along with the organisms usually implicated in the attack. The types of attack that have most commonly been documented are illustrated through generalized case histories for different classes of alloys. The chapter also describes the general approaches to be taken to prevent microbiologically influenced corrosion. It ends with some information on the inhibition of corrosion by the action of bacteria.