1-20 of 525 Search Results for

Vaporizers

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Image
Published: 01 November 2007
Fig. 3.3 Vapor pressures of several refractory metal oxides exhibiting high vapor pressures at temperatures above 1000 °C (1830 °F). Source: Ref 4 More
Image
Published: 30 April 2020
Fig. 7.33 Schematic for binder removal by using solvent vapors. The vapor is generated inside the chamber. Vapor condensed on the components dissolves the binder, accumulates mass, and drips off the component. The effect is binder removal and concentration in the solvent bath. More
Image
Published: 01 November 2010
Fig. 21.14 Chemical vapor infiltration fabrication sequence. Chemical vapor infiltration (CVI) More
Image
Published: 01 November 2012
Fig. 27 Effect of water vapor on the fracture surface appearance of aluminum alloy 2219-T851 fatigue tested (a) in 0.101 MPa (1 atm) dry argon and (b) in 27 Pa (0.2 torr) water vapor. Testing conditions were the same except for frequency, which was 20 Hz in (a) and 5 Hz in (b). The magnifications More
Image
Published: 01 April 2013
Fig. 7 Schematic of optical emission spectrometer. Light emitted from the vaporized and excited portion of the sample are analyzed to determine the characteristic wavelengths of light emitted and the intensities of the various characteristic wavelengths. Source: Ref 1 More
Image
Published: 01 March 2001
Fig. 2 Surface engineering processes used to prevent wear. CVD, chemical vapor deposition; PVD, physical vapor deposition; EB, electron beam More
Image
Published: 01 October 2012
Fig. 11.29 Schematics of chemical vapor infiltration processes. (a) Isothermal chemical vapor infiltration. (b) Forced chemical vapor infiltration. Source: Ref 11.11 More
Image
Published: 01 March 2012
Fig. 2.1 The distribution of atoms in solid, liquid, and vapor phases of alloys. (a) Two solid solutions formed in a 50% Fe-50% Cu alloy. (b) Liquid phase formed by 50% Fe-%50 Cu alloy. (c) Two liquid phases formed in a 50% Zn-50% Pb alloy. (d) Vapor phase formed by a 50% Zn-50% Pb alloy. Adapted More
Image
Published: 01 June 1988
Fig. 5.2 Schematic illustration of the operation of a vapor-cooled heat-exchanger system Source: Water Saver Systems, Inc. More
Image
Published: 01 June 1988
Fig. 5.3 Vapor-cooled heat-exchanger system with a pumping station adjacent to the power-supply equipment Source: Water Saver Systems, Inc. More
Image
Published: 01 June 1988
Fig. 5.4 Vapor-cooled heat-exchanger system equipped with a recuperator that returns waste heat to the plant air-circulation system Source: Water Saver Systems, Inc. More
Image
Published: 01 December 1984
Figure 3-11 Optical constants of carbides and carbonitrides and common vapor-deposited compound. (From Bühler and Kossel, Ref. 37, courtesy of Dr. Riederer-Verlag, GmbH.) Layer n s K s Pd-oxide 2.75 0.6 Pt-oxide 2.75 0.25 Pb-oxide 2.67 0.1 ZnSe 2.65 — ZnS More
Image
Published: 01 December 1984
Figure 3-12 Use of vapor-deposited ZnSe to reveal entrapped WC-Co grinding media (flakes from ball milling of raw materials). As-polished (left) condition reveals only the TiC (white) and A1 2 O 3 . Vapor deposition of ZnSe reverses the color contrast of the major phases and reveals the entrapped More
Image
Published: 01 November 2007
Fig. 3.69 Effect of water vapor on oxidation of iron in air and air with 5%, 10%, 15%, and 20% H 2 O at 800 °C (1472 °F) for times up to 200 min. Source: Ref 106 More
Image
Published: 01 November 2007
Fig. 3.72 Effect of water vapor in air on the oxidation resistance of Type 310 at 1100 °C (2010 °F) cycled every 100 h. Source: Ref 113 More
Image
Published: 01 October 2011
Fig. 11.10 Hardness of various physical vapor deposition (PVD) coatings and chemical vapor deposition (CVD) coatings used for tooling materials. Source: Ref 11.9 More
Image
Published: 01 December 2006
Fig. 7.127 Left, chemical vapor deposition (CVD)-coated aluminum extrusion dies. Right, demanding heat exchanger sections in AlMgSi0.5 produced with CVD–coated dies. Source: WEFA Singen Gmbh More
Image
Published: 01 January 2000
Fig. 4 Poor (a) and good (b) designs for vessels holding both liquid and vapor phases. Sharp corners and protruding outlet end in (a) allow hot gases to become trapped in the vapor space. This is avoided in (b) by using rounded corners and mounting the vessel outlet pipe flush. More
Image
Published: 30 April 2020
Fig. 10.44 Outdoor lightbulb with an injection-molded translucent alumina vapor chamber that contains metal vapors at 1200 °C (2190 °F) to generate high-intensity lighting More
Image
Published: 01 January 2017
Fig. 7.17 Effect of percent of cold work and phase (solution and vapor) on elongation of alloy C36000 in 15 N aqueous ammonia containing 6 g/L dissolved copper in slow-strain-rate tests (1.6 × 10 −5 /s). Source: Ref 7.54 More