A pair of bearings mounted side by side in an aircraft engine failed in service. Photographs show that the inner rings were either broken or deformed, the balls were worn and flattened, and the cages severely damaged. The bearing races were damaged as well, but only on one side indicating a directional thrust. In addition to their examination, investigators also conducted metallographic studies and hardness tests, which indicated that the balls and inner rings reached temperatures above 825 °C (1520 °F). Based on their findings, investigators concluded that the bearings failed due to overheating, possibly as a result of misalignment compounded by insufficient lubrication and high speeds.

The nose landing gear on an aircraft malfunctioned during landing roll. After the incident, two fractured studs were found in the retraction jack support beam. Based on visual examination and the results of SEM fractography, investigators concluded that the studs failed by fatigue, a vulnerability because of the way they were mounted. A sketch showing the correct mounting configuration is included in the report.