This chapter provides a practical understanding of heat treatments and how to employ them to optimize the properties and structures of cast irons and steels. It discusses annealing, normalizing, quenching, tempering, patenting, carburizing, nitriding, carbonitriding, and nitrocarburizing. It describes the primary objectives of each treatment along with processing sequences, process parameters, and related phase transformations. The chapter contains more than 100 images, including time-temperature diagrams, transformation curves, data plots, and detailed micro- and macrographs. It also discusses the concepts of hardenability, critical diameter, quench severity, and Jominy testing.

The crux of this chapter is to develop a method to quantitatively define hardenability. The chapter includes the empirical methods to estimate the hardenability knowing the chemical composition, describes prior austenite grain size, and examines their utility. It then reviews the Jominy end-quench test and explains its relation to hardenability. The chapter outlines the concepts of the critical diameter and the ideal critical diameter, leading to establishing a quantitative measure of hardenability. Next, it examines methods that have been developed which allow estimation of the ideal critical diameter from the chemical composition and the austenite grain size. The chapter reviews the methods which allow calculation of the Jominy curve from a value of the ideal critical diameter. Additionally, it describes the selection and application of H-band steels. Finally, the chapter describes the effect of boron on the hardenability of steels.

The hardenability of steel is governed almost entirely by the chemical composition (carbon and alloy content) at the austenitizing temperature and the austenite grain size at the moment of quenching. This article introduces the methods to evaluate hardenability and the factors that influence steel hardenability and selection. The discussion covers processes involved in Jominy end-quench test for evaluating hardenability. The effect of carbon on hardenability data and the effect of alloys on hardenability during quenching and on the tempering response (after hardening) are also discussed. In addition, the article provides information on the hardenability limits of H-steels after a note on hardenability correlation curves and Jominy equivalence charts.

The properties of martensite and the mechanisms that govern its formation are the key to understanding hardness and the hardenability of carbon steel. Martensite is a transformation product of austenite that requires rapid cooling to suppress diffusion-dependent transformation pathways. This chapter describes the conditions that must be met for martensite to form. It discusses the role of quenching and the factors that affect cooling rate, including heat transfer, thermal diffusivity, emissivity, and section size. It defines hardenability and explains how to quantify it using the Grossmann-Bain approach or Jominy end-quench testing. It also explains how hardenability can be improved through the addition of boron, phosphorus, and other alloys.

This chapter addresses the concept of hardenability by first describing the basic hardening process for steel, starting with austenitization followed by quenching and tempering. The context also serves to clarify the difference between hardenability and hardness, which are often confused. Most of the information in the chapter is of a practical nature, covering application-oriented topics such as isothermal transformation (IT) and continuous transformation (CT) diagrams which are used to predict and control the rate of formation of ferrite, pearlite, and bainite. The chapter also discusses the effect of grain size and alloying elements and explains how Jominy end quench testing is used to evaluate the hardenability of steel.

This chapter describes how the phases are arranged into desired microstructures during the heat treatment of tool steels. It describes the microstructural changes that are the objectives of the austenitizing, quenching, and tempering steps of tool steel hardening. The chapter covers austenite composition, retained austenite, and austenite grain size and grain growth. It provides information on the hardness and hardenability of tool steel. The chapter reviews some of these concepts and describes the microstructural appearance of the products of diffusion-controlled transformation of austenite. The role that diffusion-controlled phase transformations play relative to the hardenability of high-carbon and alloy tool steels is then emphasized. It presents general considerations of transformation diagrams, Jominy curves, and the hardenability of tool steels. The factors related to the kinetics and stabilization of martensite transformation are also covered. It briefly reviews selected aspects of the changes that evolve during tempering.

This chapter describes the processes involved in heat treatment of carbon and low alloy steel, high strength low alloy steels, austenitic manganese steels, martensitic stainless steels, and austenitic stainless steels. In addition, precipitation hardening and quench hardening of carbon steel is also covered.

This article discusses the metallurgy and properties of ductile cast iron. It begins with an overview of ductile or spheroidal-graphite iron, describing the specifications, applications, and compositions. It then discusses the importance of composition control and explains how various alloying elements affect the properties, behaviors, and processing characteristics of ductile iron. The article describes the benefits of nickel and silicon additions in particular detail, explaining how they make ductile iron more resistant to corrosion, heat, and wear.

This chapter examines the cooling of steels from the austenite region. It describes the processes of determining the severity of quench. The chapter examines the methods to estimate the quench required if the size and shape of the part are known and the required cooling rate is known. The cooling rate correlation is used to calculate the hardness distribution across the diameter of cylinders. The calculations are used to illustrate the sensitivity of the hardness distribution to the severity of quench and the hardenability. The chapter discusses the methods of determining cooling rates in quenched steel components. It describes the formation of residual stresses in materials in which no phase change occurs on cooling. The chapter also examines the effect on the residual stresses of the phase changes in austenite. It provides information on two types of quench cracks in quenched steels, namely, microcracking and gross cracking during quenching.

This chapter contains problems that illustrate the calculation or determination of such items as ideal critical diameter, the Jominy curve, and the severity of quench by methods. It presents solutions for the calculation of the effect of prior austenite grain size, carbon content, chromium content, and molybdenum content on ideal critical diameter. The chapter also contains solutions for calculation of Jominy curves and determination of minimum hardness of quenched steels, tempered hardness, ideal critical diameter, severity of quench, heat treatment, and effect of tempering during heat-up to tempering temperature.

This chapter discusses the general principles of measuring hardness and hardenability of steel. The discussion begins by defining hardness and exploring the history of hardness testing. This is followed by a discussion on the principles, applications, advantages, and disadvantages of commonly used hardness testing systems: the Brinell, Rockwell, Vickers, Scleroscope, and various microhardness testers that employ Vickers or Knoop indenters. The effect of carbon content on annealed steels and hardened steels is then discussed. A brief discussion on the concept of the ideal critical diameter and austenitic grain size of steels is also provided to understand how one can calculate and quantify hardenability. The processes involved in various methods for evaluating hardenability are reviewed, discussing the effect of alloying elements on hardenability.

The low-alloy special-purpose tool steels, designated as group L steels in the AISI classification system, are similar to the water-hardening tool steels but have somewhat greater alloy content. This chapter discusses the metallurgy and performance of low-alloy special-purpose tool steels, including those with high carbon content, those with medium carbon content, and those containing nickel.

This chapter discusses ferrous metals, including low-carbon steels, stainless steels, and cast irons. It also provides information on hardening and hardenability and the tempering process.

Induction heating, in most applications, is used to selectively heat only a portion of the workpiece that requires treatment. This chapter covers the basic principles, features, and metallurgical aspects of induction heating. The discussion includes the conditions required for induction heating and quenching, the use of magnetic flux concentrators to improve the efficiency of surface heating, and the quenching systems used for induction hardening. The discussion also provides information on time-temperature dependence in induction heating, workpiece distortion in induction surface hardening, residual stresses after induction surface hardening and finish grinding, and input and output control of steel for induction surface hardening of gears.

The shock-resisting tool steels, designated as group S steels in the AISI classification system, have been developed to produce good combinations of high hardness, high strength, and high toughness or impact fracture resistance. This chapter describes the alloying effects of silicon on the properties of shock-resisting tool steels. In addition, it discusses the compositions, characteristics, applications, advantages, and disadvantages of shock-resisting steels with and without tungsten.

This chapter discusses the evolution of engineering alloy steels, namely chromium, nickel, and nickel-chromium alloy steels. The discussion includes the automotive demand and development of specifications for the alloy steels. It also covers various research on heat treatment of alloy steels, providing information on hardening, transformation of austenite, hardenability testing, and tempering of as-quenched martensite.

This chapter discusses the method for calculating hardenability from composition. It contains tables listing multiplying factors, carbon content, initial hardness, and 50% martensite hardness. The tables also list Jominy distance for 50% martensite vs. DI (in. and mm), boron factors vs. % carbon and alloy factor, and distance hardness dividing factors for non-boron and boron steels (in. and mm).

The oil-hardening cold-work tool steels, designated as group O steels in the AISI classification system, derive their high hardness and wear resistance from high carbon and modest alloy contents. This chapter describes the microstructures and hardenability of oil-hardening tool steels and discusses the processes involved in the hardening and tempering of tool steels. It also covers the selection criteria and applications of oil-hardening cold-work tool steels.