Stress severity factors are used in design and analysis to account for stress concentrations, variations in material properties and fabrication quality, and other analytical uncertainties. They indicate the severity of stress in areas that are prone to crack development. This appendix discusses stress severity factors associated with fastener holes in attachment joints.

This chapter discusses the primary methods used to repair composites, including fill repairs, injection repairs, bolted repairs, and bonded repairs. It also discusses issues associated with field repairs.

This chapter discusses the fusion welding processes, namely oxyfuel gas welding, oxyacetylene braze welding, stud welding (stud arc welding and capacitor discharge stud welding), high-frequency welding, electron beam welding, laser beam welding, hybrid laser arc welding, and thermit welding.

A design modification intended to reduce dowel bolt failures in an aircraft engine proved ineffective, prompting an investigation to determine what was causing the bolts to break. As the chapter explains, failure specimens were examined under various levels of magnification and subjected to chemical analysis and low-cycle fatigue tests. Based on their findings, investigators concluded that the bolts failed due to fatigue compounded by excessive clearances and poor surface finishes. The chapter provides a number of recommendations addressing these issues and related concerns.

This appendix contains several tables listing UNS numbers, common names, and descriptions of important titanium alloys and where they are typically used.

This chapter describes the mechanisms, characteristics, and prevention of intergranular and exfoliation corrosion in various aluminum alloys. It discusses susceptible alloys and recommended tempers and presents several examples of exfoliation in aircraft components. It also explains how the two forms of corrosion are related to stress-corrosion cracking.

Fatigue failures occur due to the application of fluctuating stresses that are much lower than the stress required to cause failure during a single application of stress. This chapter describes three basic factors that cause fatigue: a maximum tensile stress of sufficiently high value, a large enough variation or fluctuation in the applied stress, and a sufficiently large number of cycles of the applied stress. The discussion covers high-cycle fatigue, low-cycle fatigue, and fatigue crack propagation. The chapter then discusses the stages where fatigue crack nucleation and growth occurs. It describes the most effective methods of improving fatigue life. The chapter also explains the effect of geometrical stress concentrations on fatigue. In addition, it explores the environmental effects of corrosion fatigue, low-temperature fatigue, high-temperature fatigue, and thermal fatigue. Finally, the chapter discusses a number of design philosophies or methodologies to deal with design against fatigue failures.

Failure analysis is a systematic investigative procedure using the scientific method to identify the causes of a failure. This chapter begins by exploring what failure analysis is followed by a section describing the sequence of stages in the investigation and analysis of failure and the three principles that must be carefully followed during the analysis. It then provides information on the normal location of fracture and concludes with a list of questions to ask about fractures.

This chapter examines the static, fatigue, and damage tolerance properties of glass, aramid, and carbon fiber systems. It also explains how delaminations, voids, porosity, fiber distortion, and fastener hole defects affect impact resistance and strength.

Engineers have many materials to choose from when dealing with weight-related design constraints. The list includes aluminum, beryllium, magnesium, and titanium alloys as well as engineering plastics, structural ceramics, and polymer-, metal-, and ceramic-matrix composites. This chapter provides a brief overview of these lightweight materials, discussing their primary advantages along with their properties, behaviors, and limitations.

This chapter focuses on various factors to be considered at design stage to minimize corrosion. It begins by providing information on design considerations and general corrosion awareness. This is followed by a description of several factors influencing materials-component failure. Details on design and materials selection, which assist in controlling corrosion, are then provided. The chapter ends with a discussion on the design factors that influence corrosion.

This chapter provides a general overview of titanium and its versatility as an engineering material.

This chapter describes the applications with the greatest impact on titanium consumption and global market trends. It explains where, how, and why titanium alloys are used in aerospace, automotive, chemical processing, medical, and military applications as well as power generating equipment, sporting goods, oil and gas production, and marine vessels.

This chapter describes some common pitfalls encountered in failure investigations and provides guidance to help engineers recognize processes and “quick fixes” that companies often try to substitute for failure analysis. It discusses three important skills and characteristics that a professional engineer must improve to conduct an effective and successful failure investigation, namely technical skills, communication skills, and technical integrity. The chapter also provides information on the additional basic tools available for failure investigation and root cause determination: the Kepner-Tregoe structured problem-solving method, PROACT software for root cause analysis developed by the Reliability Center, Inc., and other processes and methods developed by the Failsafe Network, Inc., and Shainin LLC.

Adhesive bonding is a widely used industrial joining process in which a polymeric material is used to join two separate pieces (the adherends or substrates). This chapter begins with a discussion on the advantages and disadvantages of adhesive bonding, followed by a section providing information on the theory of adhesion. The chapter then describes the considerations for designing adhesively bonded joints and for testing or characterizing adhesive materials. The following section covers the characteristics of the most important synthetic adhesive systems and five groups of adhesives, namely structural, hot melt, pressure sensitive, water based, and ultraviolet and electron beam cured. The chapter ends with a discussion on some general guidelines for adhesive bonding and the basic steps in the adhesive bonding process.

This chapter is largely a compendium of best practices and procedures for minimizing the effects of fatigue. It explains how to make products more resistant to fatigue by choosing the right materials and manufacturing processes, avoiding geometries and features that concentrate strains, preventing or removing surface damage, and by inducing compressive mean stresses that prolong fatigue life. It also discusses the use of property conditioning and restoration treatments, the benefits of interference fits and processes such as coaxing, the effects of assembly damage and operating overload, the importance of surface cleanliness and finish, and the role of inspection, testing, replacement, and repair in safe-life and fail-safe designs. Examples highlighting the benefits and potential pitfalls of proof loading tests are included as well.

Brazing and soldering jointly represent one of several methods for joining solid materials. This chapter summarizes the principal characteristics of the various joining methods. It then discusses key parameters of brazing including surface energy and tension, wetting and contact angle, fluid flow, filler spreading characteristics, surface roughness of components, dissolution of parent materials, new phase formations, significance of the joint gap, and the strength of metals. The chapter also describes issues in processing aspects that must be considered when designing a joint, and the health, safety, and environmental aspects of brazing.

Casting is one of the basic processes used for the shaping of steel. It is economical in both cost and time of production. Numerous components are produced from cast steel because of the advantages of the process. These advantages can best be described under the following headings: design flexibility, metallurgical versatility and quality, and economic benefits. This chapter looks at these advantages of steel castings. Of major interest is the comparison of cast steel with wrought steel and weldments in terms of properties, availability, cost, and quality. The chapter also includes information on cast steel compared to other cast metals and other methods of steel fabrication.

This chapter addresses some of the challenges involved in materials selection, providing context for much of the information presented in the book. It describes a typical four-step design scenario, noting material-related considerations and information needs. It explains how design decisions are complicated by the interconnected nature of material properties, design geometry, and manufacturing requirements and effects. The chapter also assesses the design impact of several materials and discusses codes, standards, and specifications.