This chapter covers the practical aspects of machining, particularly for turning, milling, drilling, and grinding operations. It begins with a discussion on machinability and its impact on quality and cost. It then describes the dimensional and surface finish tolerances that can be achieved through conventional machining methods, the mechanics of chip formation, the factors that affect tool wear, the selection and use of cutting fluids, and the determination of machining parameters based on force and power requirements. It also includes information on nontraditional machining processes such as electrical discharge, abrasive jet, and hydrodynamic machining, laser and electron beam machining, ultrasonic impact grinding, and electrical discharge wire cutting.

This chapter defines near-net shape forging as the process of forging parts close to their final dimensions such that little machining or only grinding is required as a final step. It then describes the causes of dimensional variations in forging, including die deflection, press deflection, and process inconsistencies, and discusses related innovations.

In the Semiconductor I/C industry, it has been well documented that the proportion of factory and customer field returns attributed to device damage resulting from electrical over-stress (EOS) and electro-static discharge (ESD) can amount to 40 to 50%. This study entailed EOS and ESD simulation using a variety of models, namely the Human Body Model (HBM), the Charged Device Model (CDM) and the so-called Machine Model (MM), and then conducting electrical and physical failure analysis and comparing the results with documented analyses performed on customer field returns and factory failures. It is shown that a distinction can be made between EOS and ESD failures and between the characteristic failure signatures produced by the ESD models. The CDM physical failure location is at the input buffer and in the gate oxide, where as both HBM and MM failures occur mostly in the contacts at the input protection structures.

Beryllium’s machining characteristics are similar to those of heat-treated cast aluminum and chilled cast iron. Like the other materials, it can be turned, milled, drilled, bored, sawed, cut, threaded, tapped, and trepanned with good results. This chapter explains how these machining operations are conducted and describes the effect of tooling materials, cutting speeds, metal-removal rates, and other variables. It also explains how to assess and remove surface damage caused by machining such as microcracks and twins.

This chapter is a detailed account of major sources of stray current that can cause corrosion and discusses several ways to prevent damage from stray-current corrosion.

This chapter discusses the factors that influence the cost and complexity of machining titanium alloys. It explains how titanium compares to other metals in terms of cutting force and power requirements and how these forces, along with cutting speeds and the use of cutting fluids, affect tool life, surface finish, and part tolerances. The chapter also includes a brief review of nontraditional machining methods.

This chapter describes the processes involved in the fabrication of wrought and cast metal products. It discusses deformation processes including bending and forming, material removal processes such as milling, cutting, and grinding, and joining methods including welding, soldering, and brazing. It also discusses powder consolidation, rolling, drawing and extrusion, and common forging methods.